Initiation methyl acrylate

Thermal homolytic dissociation of (TMP)Co-CH(CH3)C02CH3 produces an organic radical ( CH(CH3)C02CH3) that initiates methyl acrylate (MA) polymerization (eqn (5.2.4)) to form an oligomer radical that binds with (TMP)Co. During the last stage of the induction period (eqn... 

Poly (methyl Acrylate). The monomer used for preparing poly(methyl acrylate) is produced by the oxidation of propylene. The resin is made by free-radical polymerization initiated by peroxide or azo catalysts and has the following formula ... 

Poly(acrylic acid) and Poly(methacrylic acid). Poly(acryHc acid) (8) (PAA) may be prepared by polymerization of the monomer with conventional free-radical initiators using the monomer either undiluted (36) (with cross-linker for superadsorber appHcations) or in aqueous solution. Photochemical polymerization (sensitized by benzoin) of methyl acrylate in ethanol solution at —78° C provides a syndiotactic form (37) that can be hydrolyzed to syndiotactic PAA. From academic studies, alkaline hydrolysis of the methyl ester requires a lower time than acid hydrolysis of the polymeric ester, and can lead to oxidative degradation of the polymer (38). Po1y(meth acrylic acid) (PMAA) (9) is prepared only by the direct polymerization of the acid monomer it is not readily obtained by the hydrolysis of methyl methacrylate. 

Some details of the chain-initiation step have been elucidated. With an oxygen radical-initiator such as the /-butoxyl radical, both double bond addition and hydrogen abstraction are observed. Hydrogen abstraction is observed at the ester alkyl group of methyl acrylate. Double bond addition occurs in both a head-to-head and a head-to-tail manner (80). 

The molecular weight of a polymer can be controlled through the use of a chain-transfer agent, as well as by initiator concentration and type, monomer concentration, and solvent type and temperature. Chlorinated aUphatic compounds and thiols are particularly effective chain-transfer agents used for regulating the molecular weight of acryUc polymers (94). Chain-transfer constants (C at 60°C) for some typical agents for poly(methyl acrylate) are as follows (87) ... 

A number of methods such as ultrasonics (137), radiation (138), and chemical techniques (139—141), including the use of polymer radicals, polymer ions, and organometaUic initiators, have been used to prepare acrylonitrile block copolymers (142). Block comonomers include styrene, methyl acrylate, methyl methacrylate, vinyl chloride, vinyl acetate, 4-vinylpyridine, acryUc acid, and -butyl isocyanate. 

A substantial number of photo-induced charge transfer polymerizations have been known to proceed through N-vinylcarbazole (VCZ) as an electron-donor monomer, but much less attention was paid to the polymerization of acrylic monomer as an electron receptor in the presence of amine as donor. The photo-induced charge-transfer polymerization of electron-attracting monomers, such as methyl acrylate(MA) and acrylonitrile (AN), have been recently studied [4]. In this paper, some results of our research on the reaction mechanism of vinyl polymerization with amine in redox and photo-induced charge transfer initiation systems are reviewed. 

Polymers in Schemes 12 and 13 were the first examples of the preparation of pyridinium and iminopyridinium ylide polymers. One of the more recent contributions of Kondo and his colleagues [16] deals with the sensitization effect of l-ethoxycarbonyliminopyridinium ylide (IPYY) (Scheme 14) on the photopolymerization of vinyl monomers. Only acrylic monomers such as MMA and methyl acrylate (MA) were photoinitiated by IPYY, while vinylacetate (VA), acrylonitrile (AN), and styrene were unaffected by the initiator used. A free radical mechanism was confirmed by a kinetic study. The complex of IPYY and MMA was defined as an exciplex that served as a precursor of the initiating radical. This ylide is unique in being stabilized by the participation of a... 

Kochi (1956a, 1956b) and Dickerman et al. (1958, 1959) studied the kinetics of the Meerwein reaction of arenediazonium salts with acrylonitrile, styrene, and other alkenes, based on initial studies on the Sandmeyer reaction. The reactions were found to be first-order in diazonium ion and in cuprous ion. The relative rates of the addition to four alkenes (acrylonitrile, styrene, methyl acrylate, and methyl methacrylate) vary by a factor of only 1.55 (Dickerman et al., 1959). This result indicates that the aryl radical has a low selectivity. The kinetic data are consistent with the mechanism of Schemes 10-52 to 10-56, 10-58 and 10-59. This mechanism was strongly corroborated by Galli s work on the Sandmeyer reaction more than twenty years later (1981-89). 

A radical cyclization of a 2-chloroacyl enamine 157 was used to synthesize 2-substituted pyroglutamates 160. Usually, the radical 158 undergoes an initial 5-endo cyclization (path a) and the resulting intermediate 159 attacked electrophiles like methyl acrylate to give the pyroglutamate 160. Unexpectedly, the reaction with methyl methacrylate took another course and a seven-membered... 

For the remaining three systems, styrene-vinyl acetate, vinyl acetate-vinyl chloride, and methyl acrylate-vinyl chloride, one reactivity ratio is greater than unity and the other is less than unity. They are therefore nonazeotropic. Furthermore, since both ri and 1/7 2 are either greater than or less than unity, both radicals prefer the same monomer. In other words, the same monomer—styrene, vinyl chloride, and methyl acrylate in the three systems, respectively—is more reactive than the other with respect to either radical. This preference is extreme in the styrene-vinyl acetate system where styrene is about fifty times as reactive as vinyl acetate toward the styrene radical the vinyl acetate radical prefers to add the styrene monomer by a factor of about one hundred as compared with addition of vinyl acetate. Hence polymerization of a mixture of similar amounts of styrene and vinyl acetate yields an initial product which is almost pure polystyrene. Only after most of the styrene has polymerized is a copolymer formed... 

The butadiene is the limiting reagent and conversions will be expressed in terms of this species. Over the composition range of interest there will always be sufficient methyl acrylate present to tie up the aluminum chloride. Consequently the concentration of the complex (A1C13-M) will remain constant throughout the length of the reactor at a value equal to the initial A1C13 concentration. For these conditions the reaction rate expression is the form... 

A half-metallocene iron iodide carbonyl complex Fe(Cp)I(CO)2 was found to induce the living radical polymerization of methyl acrylate and f-bulyl acrylate with an iodide initiator (CH3)2C(C02Et)I and Al(Oi- Pr)3 to provide controlled molecular weights and rather low molecular weight distributions (Mw/Mn < 1.2) [79]. The living character of the polymerization was further tested with the synthesis of the PMA-fc-PS and PtBuA-fi-PS block copolymers. The procedure efficiently provided the desired block copolymers, albeit with low molecular weights. 

The diimine palladium compounds are less active than their nickel analogs, producing highly branched (e.g., 100 branches per 1,000 carbons) PE. However, they may be used for the copolymerization of Q-olefins with polar co-monomers such as methyl acrylate.318,319 Cationic derivatives, such as (121), have been reported to initiate the living polymerization of ethylene at 5°C and 100-400 psi.320 The catalyst is long-lived under these conditions and monodisperse PE (Mw/Mn= 1.05-1.08) may be prepared with a linear increase in Mn vs. time. 

The. addition of mercaptans to methyl acrylate is catalyzed both by base and by sources of free radicals. The direction of addition is the same in either case, but the radical initiated reaction produces a good deal of polymeric byproduct. 

On the basis of available experimental data, it is impossible to choose a definite pathway of elimination of silanol. However, study of silylation of methyl P -nitropropionate (411) with BSA in the presence of trapping agents rigorously proved that silyl nitronate D is initially formed. This compound can be detected in the [3 + 2]-cycloaddition reaction with methyl acrylate product (413). If silylation of AN (411) is performed in the presence of ethyl vinyl ether, a-nitrosoalkene E can be successfully trapped in as heterodiene a Diels-Alder reaction. Dihydroox-azine (414) is formed, and its silylation affords isolable product (415). 

Some chemicals are susceptible to peroxide formation in the presence of air [10, 56]. Table 2.15 shows a list of structures that can form peroxides. The peroxide formation is normally a slow process. However, highly unstable peroxide products can be formed which can cause an explosion. Some of the chemicals whose structures are shown form explosive peroxides even without a significant concentration (e.g., isopropyl ether, divinyl acetylene, vinylidene chloride, potassium metal, sodium amide). Other substances form a hazardous peroxide on concentration, such as diethyl ether, tetrahydrofuran, and vinyl ethers, or on initiation of a polymerization (e.g., methyl acrylate and styrene) [66]. 

---