HPLC high performance liquid defined

In modern times, most analyses are performed on an analytical instrument for, e.g., gas chromatography (GC), high-performance liquid chromatography (HPLC), ultra-violet/visible (UV) or infrared (IR) spectrophotometry, atomic absorption spectrometry, inductively coupled plasma mass spectrometry (ICP-MS), mass spectrometry. Each of these instruments has a limitation on the amount of an analyte that they can detect. This limitation can be expressed as the IDL, which may be defined as the smallest amount of an analyte that can be reliably detected or differentiated from the background on an instrument. 

Liquid chromatography (LC) and, in particular, high performance liquid chromatography (HPLC), is at present the most popular and widely used separation procedure based on a quasi-equilibrium -type of molecular distribution between two phases. Officially, LC is defined as a physical method... in which the components to be separated are distributed between two phases, one of which is stationary (stationary phase) while the other (the mobile phase) moves in a definite direction [ 1 ]. In other words, all chromatographic methods have one thing in common and that is the dynamic separation of a substance mixture in a flow system. Since the interphase molecular distribution of the respective substances is the main condition of the separation layer functionality in this method, chromatography can be considered as an excellent model of other methods based on similar distributions and carried out at dynamic conditions. 

In the next section, the term "complex polymers" is defined, the effects of polymer complexity on conventional SEC analysis are examined, and attempts to analyze ccanplex polymers by utilizing SEC detector technology are summarized. High performance liquid chromatography (HPLC) attempts to accomplish the task are then described. This is followed by a summary of the theoretical development of OC, experimental results of OC analysis, complications which emerged, and finally a summary of the status of OC in light of recent developments. (1) and (2) provide reviews of OC. 

There are few methods which can measure well-defined metal fractions with sufficient sensitivity for direct use with environmental samples (approach B in Fig. 8.2). Nevertheless, this approach is necessary in the experimental determination of the distribution of compounds that are labile with respect to the time scales of the analytical method. Recent literature indicates that high-performance liquid (HPLC) and gas chromatographic (GC) based techniques may have such capabilities (Batley and Low, 1989 Chau and Wong, 1989 van Loon and Barefoot, 1992 Kitazume et al, 1993 Rottmann and Heumann, 1994 Baxter and Freeh, 1995 Szpunar-Lobinska et al, 1995 Ellis and Roberts, 1997 Vogl and Heumann, 1998). The ability to vary both the stationary and mobile phases, in conjunction with suitable detector selection (e.g. ICP-MS), provides considerable discriminatory power. HPLC is the superior method GC has the disadvantage that species normally need to be derivatised to volatile forms prior to analysis. Capillary electrophoresis also shows promise as a metal speciation tool its main advantage is the absence of potential equilibria perturbation, interactions... 

A variety of MS formats are widely accepted and applied in the pharmaceutical industry. The specific MS application is often defined by the sample introduction technique. The pharmaceutical applications highlighted in this article feature two types of sample introduction techniques dynamic and static. Dynamic sample introduction involves the use of high-performance liquid chromatography (HPLC) on-line with MS. The resulting liquid chromatography/mass spectrometry (LC/MS) format provides unique and enabling capabilities for pharmaceutical analysis. The electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) modes are the most widely used. Static sample introduction techniques primarily use matrix-assisted laser desorption/ionization (MALDI). ... 

Cmde dextransucrase was reacted with 100 mM sucrose for 1 h at 30 °C and then boiled for 5 min to terminate the enzyme reaction. One unit of dextransucrase activity was defined as that amount of enzyme releasing 1 p.M fructose per min from 100 mM sucrose. The fructose was determined by high-performance liquid chromatography (HPLC) using an Aminex FIPX 87K column (300 7.8 mm) and an HPLC analyzer coupled to a refiactive index detector. The column was maintained at 85 °C and 0.01 M K2SO4 was used as a mobile phase at a flow rate 0.6 ml/min. 

---