Hands-on training

Hands-on training, where employees actually apply lessons learned in simulated or real situations, will enhance learning. For example, operating personnel, who will work in a control room or at control panels, would benefit by being trained at a simulated control panel. Upset conditions of various types could be displayed on the simulator, and... 

This clearly written, class-tested manual has long given students essential hands-on training with key experiments. Exceptionally compatible with Atkins/Jones, Chemical Principles, the manual is known for its clear instructions and illustrations. All experiments are available as lab separates. 

To use CNG safely, technicians and drivers need to know what the dilfeiences are and how to work with them. Other subjects that must be understood ate NG combustion and storage, working with high-pressure conduits, connectors, regulators, and cylinders, safety codes and industry standards, and recommended CNG cylinder inspections. Detailed hands-on training for installation and maintenance technicians should normally be provided by the conversion kit manufactiuers (Demirbas, 2002). 

Differences in perception of the technique s maturity may originate from a simple lack of widespread knowledge about the approach. There are only a few short courses offered. Many students learn of it only as a side note in a physical chemistry textbook and never have hands-on training to use it. Laboratory-based Raman instrumentation is not as ubiquitously available for familiarization and casual experimentation as FTIR. While most vendors will arrange to do feasibility studies and preliminary trials with potential customers, these kinds of short experiments make it difficult for new users to build a solid familiarity with the technique. If a group has years of experience with NIR, it can be difficult to remember to re-examine Raman spectroscopy for each new project to see if it would be a better technical choice and ultimately easier to do. 

A comprehensive training program for fire brigades must include classroom and hands-on training. 

Training formal courses, hands-on training, manuals... 

Because of the limited amount of knowledge publicly available, it is best to have the manufacturer supply an installation team. If impractical, the mraufactuier should be requested to provide detailed installation instructions, which must be strictly adhered to. The manufacturer should also be requested to supervise the installation, or at least provide thorough hands-on training to the installation supervisors. Traps mentioned above should be considered, and, where relevant, steps should be taken to avoid them. 

Overall, the facility required fewer operational staff than similar traditional plants, and the integrated computer systems clearly enabled operator empowerment. Operator training was conducted both in classroom and on the shop floor, with the best results coming from hands-on training. 

DOE 0 151.lA, Chapter IV, sec. 4a 4.2.9.2 Drills shall provide supervised, "hands-on" training for members of emergency response organizations. 

The Renaissance-era concept of apprenticeship is a good example of dimostrazione in action. Apprenticeship during the Renaissance period was a combination of fundamental studies and extensive hands-on training that resulted in experiential learning. This kind of training was very different from the educational opportunities of the Dark Ages and is also very different from the way we learn today. In apprentice-based education, a teacher... 

Should there be more classroom instruction for the operators in the basics of operating equipment Should the operators receive more field, hands-on training ... 

---