Power hand-held tools

Nickel is also very popular in the manufacture of batteries. Nickel-cadmium (nicad) and nickel-metal hydride (NiMH) batteries are the most popular of these batteries. They are used in a great variety of appliances and electronics, including hand-held power tools, compact disc (CD)... [Pg.380]

HAV is vibration transmitted firom work processes into workers hands and arms. It can be caused by operating hand-held power tools such as ... [Pg.18]

Safe use of portable during its normal use and which uses a mains power supply. Typical equipment electrical includes hand lamps, any hand-held power tools, portable pipe-threading... [Pg.236]

The following hand-held powered tools may be equipped with only a positive on-ofi control switch platen sanders, disc sanders with... [Pg.893]

Other hand-held powered tools such as circular saws having a blade diameter greater than 2 inches, chain saws, and percussion tools without positive accessory holding means must be equipped with a constant pressure switch that will shut oflF the power when the pressure is released. [Pg.894]

The applications are automotive window seals and fiiel filler gaskets, industrial door and window seals and weatherstripping, wire/cable covering, and hand-held power tool housing/handles. Nonslip soft-touch hand-held tool handles provide weather and chemical resistance and vibration absorption.i Translucent grade is extruded into films for face masks and tube/hosing and injection-molded into flexible keypads for computers and telephones. Certain grades are paintable without a primer. Typical durometer hardnesses are Shore A 60, 76, and 80. [Pg.214]

The following hand-held powered tools may be equipped with only a positive on-off control switch platen sanders, disc sanders with discs 2 inches or less in diameter, grinders with wheels 2 inches or less in diameter, routers, planers, laminate trimmers, nibblers, shears, scroll saws and jigsaws with blade shanks V4 inch wide or less. [Pg.449]

In line continuous drive hand held power tools exceeding 1.6Nm (Min. lbs.) must have torque controlled utilizing a pulse tool, reactionary device or tool arm. [Pg.306]

Royaltuf 498 is designed for nylon 6 resins, giving better impact resistance at low temperature. It is produced from EPDM, functionalized with 1% maleic, and has a Mooney viscosity of 30. Applications include housings for hand-held power tools and sporting goods. [Pg.168]

Hand-held power tools shall not be supplied with power from the dive location until requested by the diver. [Pg.854]

Work equipment includes hand tools and hand-held power tools. These tools need to be correct for the task, well maintained and properly used. [Pg.195]

Figure 12.8 Typical range of hand-held power tools.

B3ZG6 - injection molding, 30% glass fiber, medirun stiffness, high notched impact strength (hand-held power tools)... [Pg.386]

A protective mask (fresh air or equivalent) is recommended for workers removing lead-based paint with power tools. Cleaning rates of 14—18 ft. /hr were reported by Bloemke at a cost of 3.05/ft.2 At the time of writing, reliable figures for lead-based paint abatement using hand-held power tools in residential sfructures is not available, but they are being generated. [Pg.207]

On hand-held power tools, is the operating control located so as to minimize the possibility of accidental operation ... [Pg.508]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...