Halides esters fluorides

Electrochemical fluorination in anhydrous hydrogen fluoride (Simons process) involves electrolysis of organic compounds (ahphatic hydrocarbons, haloalkanes, acid halides, esters, ethers, amines) at nickel electrodes. It leads mostly to perfluori-nated compounds, but is accompanied to a high extent by cleavage and rearrangement reactions. The mechanism of the formation of carbocations according to Eq. (1) and Scheme 1 is assumed... 

Nitriles by substitution. Glycosyl cyanides are formed from glycal esters (Pd-catalyzed reaction), whereas 8 2 reaction of alkyl halides requires fluoride ion to activate Me SiCN (hypervalent silicate). ... 

Phosphoramidites (89), derived from enamines, react with carboxylic acids in an irreversible manner because of the low basicity of the eliminated enamine. The anhydrides (90) may also conveniently be obtained from enol phosphites. Reactions of (89) with phenol were also studied and the kinetics found to be characteristic for bimolecular processes . In contrast to other carboxylic acid halides, acyl fluorides give tervalent phosphorus fluorides with tervalent esters (Scheme 7). ... 

The formation of ethyl cyano(pentafluorophenyl)acetate illustrates the intermolecular nucleophilic displacement of fluoride ion from an aromatic ring by a stabilized carbanion. The reaction proceeds readily as a result of the activation imparted by the electron-withdrawing fluorine atoms. The selective hydrolysis of a cyano ester to a nitrile has been described. (Pentafluorophenyl)acetonitrile has also been prepared by cyanide displacement on (pentafluorophenyl)methyl halides. However, this direct displacement is always aecompanied by an undesirable side reaetion to yield 15-20% of 2,3-bis(pentafluoro-phenyl)propionitrile. 

Various sources of fluoride ion have been investigated, of which highly nucleophilic tetraalkylammonium fluorides ate the most effective Thuf, fluoro alkyl halides and N (fluoroalkyl)amines are efficiently synthesized by treatment of the corresponding trifluoromethanesulfonic esters with tetrabutylammonium fluoride trihydrate in aprotic solvents [5fl] (equation 34) The displacement reactions proceed quantitatively at room temperature within seconds, but tail with hydrogen fluoride-pyridine and give reasonable yields only with hydrogen fluo ride-alkylamine reagents... 

Metal halide salts other than sodium iodide have been used sparsely to prepare halodeoxy sugars from sulfonate esters. Lithium chloride (107) and lithium bromide (33) have found limited application. Potassium fluoride (dihydrate) in absolute methanol has been used (51, 52) to introduce fluorine atoms in terminal positions of various D-glucose derivatives. The reaction is conducted in sealed tube systems and requires... 

Notable examples of general synthetic procedures in Volume 47 include the synthesis of aromatic aldehydes (from dichloro-methyl methyl ether), aliphatic aldehydes (from alkyl halides and trimethylamine oxide and by oxidation of alcohols using dimethyl sulfoxide, dicyclohexylcarbodiimide, and pyridinum trifluoro-acetate the latter method is particularly useful since the conditions are so mild), carbethoxycycloalkanones (from sodium hydride, diethyl carbonate, and the cycloalkanone), m-dialkylbenzenes (from the />-isomer by isomerization with hydrogen fluoride and boron trifluoride), and the deamination of amines (by conversion to the nitrosoamide and thermolysis to the ester). Other general methods are represented by the synthesis of 1 J-difluoroolefins (from sodium chlorodifluoroacetate, triphenyl phosphine, and an aldehyde or ketone), the nitration of aromatic rings (with ni-tronium tetrafluoroborate), the reductive methylation of aromatic nitro compounds (with formaldehyde and hydrogen), the synthesis of dialkyl ketones (from carboxylic acids and iron powder), and the preparation of 1-substituted cyclopropanols (from the condensation of a 1,3-dichloro-2-propanol derivative and ethyl-... 

These reactions are most important for the preparation of acyl fluorides. " Acyl chlorides and anhydrides can be converted to acyl fluorides by treatment with polyhydrogen fluoride-pyridine solution" or with liquid HF at — 10°C. Formyl fluoride, which is a stable compound, was prepared by the latter procedure from the mixed anhydride of formic and acetic acids. Acyl fluorides can also be obtained by reaction of acyl chlorides with KF in acetic acid or with DAST. Carboxylic esters and anhydrides can be converted to acyl halides other than fluorides by the inorganic acid halides mentioned in 10-77, as well as with PhsPXa (X = Cl or but this is seldom done. Halide exchange can be carried out in a... 

Especially for large-scale work, esters may be more safely and efficiently prepared by reaction of carboxylate salts with alkyl halides or tosylates. Carboxylate anions are not very reactive nucleophiles so the best results are obtained in polar aprotic solvents45 or with crown ether catalysts.46 The reactivity order for carboxylate salts is Na+ < K+ < Rb+ < Cs+. Cesium carboxylates are especially useful in polar aprotic solvents. The enhanced reactivity of the cesium salts is due to both high solubility and minimal ion pairing with the anion 47 Acetone is a good solvent for reaction of carboxylate anions with alkyl iodides48 Cesium fluoride in DMF is another useful... 

Titanium disulfide, 25 57, 58 Titanium disulfide electrodes sloping discharge curve, 3 414 Titanium esters, 25 1 Titanium fluorides, 25 47-49 Titanium halides, 25 47-55 Titanium hydride, 13 626 Titanium hydrides, 25 5 Titanium-hydrogen system, 25 3-5 phase diagram for, 25 5 Titanium iodides, 25 54-55 Titanium/isopropoxy/nitrilotriethoxy ratio, 25 93... 

Aromatic substituent effects due to phosphorus groups have been studied for a number of reactions.47 Thus ester hydrolysis and fluoride-displacement rates, for (56) and (57) respectively, are enhanced by phosphorus substituents (X = O or ), while the rate of hydrolysis of the halide (58) is enhanced for X = , but slowed for X = O.47 A perturbation M.O. analysis of these observations has been presented.48... 

When sodium ethoxide is used in place of sodium hydroxide in the carbonylation reaction of benzyl halides with dicobalt octacarbonyl, ethyl esters are produced instead of the acids [15], Esters are also produced directly from iodoalkanes through their reaction with molybdenum hexacarbonyl in the presence of tetra-/i-butylammo-nium fluoride [16]. Di-iodoalkanes produce lactones [16]. The reaction can be made catalytic in the hexacarbonyl by the addition of methyl formate [16]. t-Butyl arylacetic esters are produced in moderate yield (40-60%) under phase-transfer catalytic conditions in the palladium promoted carbonylation reaction with benzyl chlorides [17]. 

Tertiary benzylic nitriles are useful synthetic intermediates, and have been used for the preparation of amidines, lactones, primary amines, pyridines, aldehydes, carboxylic acids, and esters. The general synthetic pathway to this class of compounds relies on the displacement of an activated benzylic alcohol or benzylic halide with a cyanide source followed by double alkylation under basic conditions. For instance, 2-(2-methoxyphenyl)-2-methylpropionitrile has been prepared by methylation of (2-methoxyphenyl)acetonitrile using sodium amide and iodomethane. In the course of the preparation of a drug candidate, the submitters discovered that the nucleophilic aromatic substitution of aryl fluorides with the anion of a secondary nitrile is an effective method for the preparation of these compounds. The reaction was studied using isobutyronitrile and 2-fluoroanisole. The submitters first showed that KHMDS was the superior base for the process when carried out in either THF or toluene (Table I). For example, they found that the preparation of 2-(2-methoxyphenyl)-2-methylpropionitrile could be accomplished h... 

Monomers that copolymerize with thiocarbonyl fluoride include olefins, vinyl halides, vinyl esters, ally esters, acrylates, vinyl ethers, and vinyltrichloro-silane. Nonconjugated diolefins lead to crosslinked products. Conjugated dienes inhibit polymerization. 

General Reaction Chemistry of Sulfonic Acids. Sulfonic acids may be used to produce sulfonic acid esters, which are derived from epoxides, olefins, alkynes, allenes, and ketenes, as shown in Figure 1 (10). Sulfonic acids may be converted to sulfonamides via reaction with an amine in the presence of phosphorus oxychloride [10025-87-3], POCl3 (11). Because sulfonic acids are generally not converted direcdy to sulfonamides, the reaction most likely involves a sulfonyl chloride intermediate. Phosphorus pentachloride [10026-13-8] and phosphorus pentabromide [7789-69-7] can be used to convert sulfonic acids to the corresponding sulfonyl halides (12,13). The conversion may also be accomplished by continuous electrolysis of thiols or disulfides in the presence of aqueous HQ [7647-01-0] (14) or by direct sulfonation with chlorosulfuric acid. Sulfonyl fluorides are typically prepared by direct sulfonation with fluorosulfuric acid [7789-21-1], or by reaction of the sulfonic acid or sulfonate with fluorosulfuric acid. Halogenation of sulfonic acids, which avoids production of a sulfonyl halide, can be achieved under oxidative halogenation conditions (15). 

---