Halides, alkyl, preparation from sulfonate esters

Cationic fluorinated surfactants have been prepared from perfluoroalkyl esters, obtained by converting an acid fluoride into an ester. Reaction of the ester with a diamine and alkylation with a halide or sulfonate gives a cationic surfactant, for example [166] ... 

An advantage that sulfonate esters have over alkyl halides is that their prepara tion from alcohols does not involve any of the bonds to carbon The alcohol oxygen becomes the oxygen that connects the alkyl group to the sulfonyl group Thus the configuration of a sulfonate ester is exactly the same as that of the alcohol from which It was prepared If we wish to study the stereochemistry of nucleophilic substitution m an optically active substrate for example we know that a tosylate ester will have the same configuration and the same optical purity as the alcohol from which it was prepared... 

Sulfonate esters are especially useful substrates in nucleophilic substitution reactions used in synthesis. They have a high level of reactivity, and, unlike alkyl halides, they can be prepared from alcohols by reactions that do not directly involve bonds to the carbon atom imdeigoing substitution. The latter aspect is particularly important in cases in which the stereochemical and structural integrity of the reactant must be maintained. Sulfonate esters are usually prepared by reaction of an alcohol with a sulfonyl halide in the presence of pyridine ... 

The esterification of support-bound carboxylic acids has not been investigated as thoroughly as the esterification of support-bound alcohols. Resin-bound activated acid derivatives that are well suited to the preparation of esters include O-acylisoureas (formed from acids and carbodiimides), acyl halides [23,226-228], and mixed anhydrides (Table 13.15). A-Acylurea formation does not compete with esterifications as efficiently as it does with the formation of amides from support-bound acids. Esters can also be prepared from carboxylic acids on insoluble supports by acid-catalyzed esterification [152,229]. Alternatively, support-bound carboxylic acids can be esteri-fied by O-alkylation, either with primary or secondary aliphatic alcohols under Mitsu-nobu conditions or with reactive alkyl halides or sulfonates (Table 13.15). 

This reaction is analogous to similar methods for the preparation of ethers (methods 113 and 116), Both simple and mixed sulfides may be made from aliphatic mercaptans or thiophenols. The sodium mercaptides are formed from the mercaptans and aqueous or alcoholic solutions of sodium hydroxide or alcoholic sodium ethoxide. Alkylation is effected by halides, alkyl sulfates, or esters of sulfonic acids. The over-all yields of sulfides are usually above 70%. r-Butyl mercaptan is alkylated directly by /-butyl alcohol in strong sulfuric acid to give /-butyl sulfide in 87% yield. ... 

Sodium sulfhydride (NaSH) is a much better reagent for the formation of thiols (mercaptans) from alkyl halides than H2S and is used much more often. It is easily prepared by bubbling H2S into an alkaline solution, but hydrosulfide on a supported polymer resin has also been used. " The reaction is most useful for primary halides. Secondary substrates give much lower yields, and the reaction fails completely for tertiary halides because elimination predominates. Sulfuric and sulfonic esters can be used instead of halides. Thioethers (RSR) are often side products. The conversion can also be accomplished under neutral conditions by treatment of a primary halide with F and a tin sulfide, such as PhsSnSSnPhs. An indirect method for the preparation of a thiol is the reaction of an alkyl halide with thiourea to give an isothiuronium salt (119), and subsequent treatment with alkali or a... 

From a historical perspective, the a-(dialkylamino)nitrile anions were the first acyl anion equivalents to undergo systematic investigation. More recent studies indicate that anions of a-(dialkylamino)nitriles derived from aliphatic, aromatic or heteroaromatic aldehydes intercept an array of electrophiles including alkyl halides, alkyl sulfonates, epoxides, aldehydes, ketones, acyl chlorides, chloroformates, unsaturated ketones, unsaturated esters and unsaturated nitriles. Aminonitriles are readily prepared and their anions are formed with a variety of bases such as sodium methoxide, KOH in alcohol, NaH, LDA, PhLi, sodium amide, 70% NaOH and potassium amide. Regeneration of the carbonyl group can be achieved... 

Chlorobenzene is employed in the synthesis of certain amino-containing vat dye intermediates. When reacted with phthalic anhydride, the product is 2-chloroanthraquinone, which, with ammonia, is converted readily into 2-aminoanthraquinone (61). Other routes include replacement of halogen by amino groups, with ammonia or ammonium salts of urea, and alkyl- and aryl amines to afford secondary amines. Modification of the amino group by alkylation, with dimethyl sulfate, alkyl halides or esters of toluenesul-fonic acids, is of synthetic value. Arylation of the amino groups is of importance only in the reaction between aminoanthraquinones and nitro- or chloroanthraquinones to yield dianthraquinonylamines, or anthrimides48. For example, the reaction between 62 and 63 yields 64, which can then be converted into carbazole 65, Cl Vat Brown R (Scheme 14). Amination of haloanthraquinones such as l-amino-4-bromoanthraquinone-2-sulfonic acid (bromamine acid) (66), prepared from 1-aminoanthraquinone, is of industrial use. 

The preparation of esters can be classified into two main categories (1) carboxylate activation with a good leaving group and (2) nucleophilic displacement of a carboxylate on an alkyl halide or sulfonate. For simple esters, acid-catalyzed esterification with azeotropic removal of water is also very effective, but limited to simple systems for the most part. The nucleophilic approach is generally not suitable for the preparation of esters if the halide or tosylate is sterically hindered, but there has been some success with simple secondary halides and tosylates (ROTs, DMF, K2CO3, 69-93% yield). The section on transesterification should also be consulted, since this technology can be quite useful for the preparation of esters from other esters. 

Alternatively, halide-free 1,3-dialkylimidazolium ILs can be prepared from the five-component reaction (glyoxal, formaldehyde, two different amines and acids. Scheme 2), and those containing alkyl sulfate or trifluoromethane sulfonate anions by simple alkylation of 1-alkylimidazole with the corresponding dialkylsulfate or alkyltrifluoro-methane sulfonate ester, respectively. " ... 

In both SnI and Sn2 reactions, the leaving group is the halogen of an alkyl halide or the sulfonate group of a sulfonate ester. Both alkyl halides and sulfonate esters are prepared from alcohols. In Chapter 10, alcohols were prepared by the hydration reaction of alkenes, by oxymercuration-demercuration of alk-enes, or by hydroboration of alkenes. Other methods can be used to prepare alcohols, and they will be discussed at a later time. This section will describe several of the reactions used to convert alcohols to halides or sulfonate esters. 

Synthesis and Stability. Sulfonate esters are conveniently prepared from precursor sulfonyl halides and the appropriate alcohol or alkoxide [Eq. (3) ] this synthetic pathway is particularly suitable for the introduction of a C label into the alkylating moiety since radioactive primary alcohols can be readily synthesized. ... 

Sodium mercaptides are prepared from the mercaptans and aqueous or alcoholic solutions of sodium hydroxide or alcoholic sodium eth-oxide. The sodium mercaptide reacts with halides, chlorohydrins, esters of sulfonic acid, or alkyl sulfonates [6] to give sulfides in yields of 70% or more. A recent report describes a general procedure for synthesizing aryl thioesters by a nucleophilic displacement of aryl halide with thiolate ion in amide solvents. No copper catalysis is necessary as in an Ullmann-type reaction. 

Because of the special structural requirements of the resin-bound substrate, this type of cleavage reaction lacks general applicability. Some of the few examples that have been reported are listed in Table 3.19. Lactones have also been obtained by acid-catalyzed lactonization of resin-bound 4-hydroxy or 3-oxiranyl carboxylic acids [399]. Treatment of polystyrene-bound cyclic acetals with Jones reagent also leads to the release of lactones into solution (Entry 5, Table 3.19). Resin-bound benzylic aryl or alkyl carbonates have been converted into esters by treatment with acyl halides and Lewis acids (Entry 6, Table 3.19). Similarly, alcohols bound to insoluble supports as benzyl ethers can be cleaved from the support and simultaneously converted into esters by treatment with acyl halides [400]. Esters have also been prepared by treatment of carboxylic acids with an excess of polystyrene-bound triazenes here, diazo-nium salts are released into solution, which serve to O-alkylate the acid (Entry 7, Table 3.19). This strategy can also be used to prepare sulfonates [401]. 

The preparation of alkyl halides by substitution reactions usually starts from alcohols because alcohols are widely available. Hydroxide ion is a poor leaving group, so the OH must first be converted into a better leaving group, either by protonation in acid or by conversion to a sulfonate or similar ester (see Section 8.9), as illustrated in the following equations ... 

Various sulfuric and phosphoric acid esters have sometimes been used instead of alcohols as starting materials for the preparation of nitriles. Of more general importance are sulfonates, particularly from methane- or p-toluene-sulfonic acid, which react in an 5N2-type substitution with cyanide ions. The most common starting materials are, as described in Section 1.8.1.2.1, alkyl halides, and if their preparation creates problems, the use of sulfonates may be advantageous. The addition of crown ethers or the... 

---