Sulfonic esters preparation

An advantage that sulfonate esters have over alkyl halides is that their prepara tion from alcohols does not involve any of the bonds to carbon The alcohol oxygen becomes the oxygen that connects the alkyl group to the sulfonyl group Thus the configuration of a sulfonate ester is exactly the same as that of the alcohol from which It was prepared If we wish to study the stereochemistry of nucleophilic substitution m an optically active substrate for example we know that a tosylate ester will have the same configuration and the same optical purity as the alcohol from which it was prepared... 

In cases where a large excess of acid is undesirable, chlorosulfonic acid is employed. An excess of chlorosulfonic acid leads to the introduction of a chlorosulfonyl group which is a useful synthon for the preparation of sulfonamides and sulfonate esters. 

Cl Disperse Blue 87 (107) and related dyestuffs are also prepared from l-oxo-3-imino-4,7-diamino-5,6-phthaloyhsoiQdoline [13418-50-3] (111) by alkylation with corresponding alkyl haUdes (122), sulfonic esters (123), or alkyl amines (124), ie, X of RX = halogen, -toluenesulfonyloxy, or NH2. 

Ethers. In the presence of anhydrous agents such as ferric chloride (88), hydrogen bromide, and acid chlorides, ethers react to form esters (see Ethers). Esters can also be prepared from ethers by an oxidative process (89). With mixed sulfonic—carboxyhc anhydrides, ethers are converted to a mixture of the corresponding carboxylate and sulfonate esters (90) ... 

Sulfonate esters are especially useful substrates in nucleophilic substitution reactions used in synthesis. They have a high level of reactivity, and, unlike alkyl halides, they can be prepared from alcohols by reactions that do not directly involve bonds to the carbon atom imdeigoing substitution. The latter aspect is particularly important in cases in which the stereochemical and structural integrity of the reactant must be maintained. Sulfonate esters are usually prepared by reaction of an alcohol with a sulfonyl halide in the presence of pyridine ... 

A series of 0-labeIed sulfonate esters was prepared, and the extent of scrambling... 

Ester eliminations are normally one of two types, base catalyzed or pyrolytic. The usual choice for base catalyzed j5-elimination is a sulfonate ester, generally the tosylate or mesylate. The traditional conditions for elimination are treatment with refluxing collidine or other pyridine base, and rearrangement may occur. Alternative conditions include treatment with variously prepared aluminas, amide-metal halide-carbonate combinations, and recently, the use of DMSO either alone or in the presence of potassium -butoxide. 

The Preparation of Halodeoxy Sugars by Displacement of Sulfonate Esters... 

Metal halide salts other than sodium iodide have been used sparsely to prepare halodeoxy sugars from sulfonate esters. Lithium chloride (107) and lithium bromide (33) have found limited application. Potassium fluoride (dihydrate) in absolute methanol has been used (51, 52) to introduce fluorine atoms in terminal positions of various D-glucose derivatives. The reaction is conducted in sealed tube systems and requires... 

Thioethers (sulfides) can be prepared by treatment of alkyl halides with salts of thiols (thiolate ions). The R group may be alkyl or aryl and organolithium bases can be used to deprotonate the thiol. As in 10-37, RX cannot be a tertiary halide, and sulfuric and sulfonic esters can be used instead of halides. As in the Williamson... 

Trialkylboranes react rapidly and in high yields with a-halo ketones,a-halo esters, a-halo nitriles, and a-halo sulfonyl derivatives (sulfones, sulfonic esters, sulfonamides) in the presence of a base to give, respectively, alkylated ketones, esters, nitriles, and sulfonyl derivatives. Potassium tert-butoxide is often a suitable base, but potassium 2,6-di-tert-butylphenoxide at 0°C in THF gives better results in most cases, possibly because the large bulk of the two tert-buXy groups prevents the base from coordinating with the R3B. The trialkylboranes are prepared by treatment of 3 mol of an alkene with 1 mol of BH3 (15-16). With appropriate boranes, the R group transferred to a-halo ketones, nitriles, and esters can be vinylic, or (for a-halo ketones and esters) aryl. " °... 

Sulfonic esters are most frequently prepared by treatment of the corresponding halides with alcohols in the presence of a base. The method is much used for the conversion of alcohols to tosylates, brosylates, and similar sulfonic esters. Both R and R may be alkyl or aryl. The base is often pyridine, which functions as a nucleophilic catalyst, as in the similar alcoholysis of carboxylic acyl halides (10-21). Primary alcohols react the most rapidly, and it is often possible to sulfonate selectively a primary OH group in a molecule that also contains secondary or tertiary OH groups. The reaction with sulfonamides has been much less frequently used and is limited to N,N-disubstituted sulfonamides that is, R" may not be hydrogen. However, within these limits it is a useful reaction. The nucleophile in this case is actually R 0 . However, R" may be hydrogen (as well as alkyl) if the nucleophile is a phenol, so that the product is RS020Ar. Acidic catalysts are used in this case. Sulfonic acids have been converted directly to sulfonates by treatment with triethyl or trimethyl orthoformate HC(OR)3, without catalyst or solvent and with a trialkyl phosphite P(OR)3. ... 

The solvolytic behavior of arylvinyl sulfonate esters also has been investigated. Jones and Maness were the first to prepare fluorosulfonate esters, 153, from the corresponding triazenes (140). In the solvolytic reactivity... 

Trifluoromethanesulfonates of alkyl and allylic alcohols can be prepared by reaction with trifluoromethanesulfonic anhydride in halogenated solvents in the presence of pyridine.3 Since the preparation of sulfonate esters does not disturb the C—O bond, problems of rearrangement or racemization do not arise in the ester formation step. However, sensitive sulfonate esters, such as allylic systems, may be subject to reversible ionization reactions, so appropriate precautions must be taken to ensure structural and stereochemical integrity. Tertiary alkyl sulfonates are neither as easily prepared nor as stable as those from primary and secondary alcohols. Under the standard preparative conditions, tertiary alcohols are likely to be converted to the corresponding alkene. 

Sulfonate esters also can be prepared under Mitsunobu conditions. Use of zinc tosylate in place of the carboxylic acid gives a tosylate of inverted configuration. 

As in the synthesis of carboxylic esters, benzotriazolides may also be used in the preparation of aromatic sulfonic esters 101... 

The reaction of alkyl halides with metal nitrites is one of the most important methods for the preparation of nitroalkanes. As a metal nitrite, silver nitrite (Victor-Meyer reaction), potassium nitrite, or sodium nitrite (Kornblum reaction) have been frequently used. The products are usually a mixture of nitroalkanes and alkyl nitrites, which are readily separated by distillation (Eq. 2.47). The synthesis of nitro compounds by this process is well documented in the reviews, and some typical cases are listed in Table 2.3.92a Primary and secondary alkyl iodides and bromides as well as sulfonate esters give the corresponding nitro compounds in 50-70% yields on treatment with NaN02 in DMF or DMSO. Some of them are described precisely in vol 4 of Organic Synthesis. For example, 1,4-dinitrobutane is prepared in 41 -46% yield by the reaction of 1,4-diiodobutane with silver nitrite in diethyl ether.92b 1-Nitrooctane is prepared by the reaction with silver nitrite in 75-80% yield. The reaction of silver nitrite with secondary halides gives yields of nitroalkanes of about 15%, whereas with tertiary halides the yields are 0-5%.92c Ethyl a-nitrobutyrate is prepared by the reaction of ethyl a-bromobutyrate in 68-75% yield with sodium nitrite in DMF.92d Sodium nitrite is considerably more soluble in DMSO than in DMF as a consequence, with DMSO, much more concentrated solutions can be employed and this makes shorter reaction times possible.926... 

Vinyl trifluoromethanesulfonates (triflates) are a new class of compounds, unknown before 1969, that have been used most extensively in solvolytic studies to generate vinyl cations.2,3,812 Three methods have been used to prepare these sulfonic esters. The first, involving the preparation and decomposition of acyltriazines,4 requires several steps to prepare the acyltriazines and is limited to the preparation of fully substituted vinyl triflates. The second method involves the electrophilic addition of trifluoromethanesulfonic acid to acetylenes5,8,15 and, consequently, is not applicable to the preparation of trisubstituted vinyl triflates and certain cyclic vinyl triflates. However, this second procedure is relatively simple and often gives purer products in higher yield than the subsequently discussed reaction with ketones. Table I lists vinyl triflates that have been prepared by this procedure. ... 

The third procedure illustrated by this preparation involves the reaotion of ketones with trifluoromethanesulfonic anhydride in a solvent such as pentane, methylene chloride, or carbon tetrachloride and in the presence of a base such as pyridine, lutidine, or anhydrous sodium carbonate.7-11,15 This procedure, which presumably involves either acid-catalyzed or base-catalyzed enolization of the ketone followed by acylation of the enol with the acid anhydride, has also been used to prepare other vinyl sulfonate esters such as tosylates12 or methanesulfonates.13... 

In addition to these physical studies at the Bureau, Tipson was able to return to his synthetic interests, both alone and in collaboration with other staff members. He was especially pleased to prepare D-talose in crystalline form, an accomplishment that had eluded Emil Fischer. Pursuing his longstanding interest in the reaction of sulfonic esters with iodide and following an earlier observation that the tetratosyl ester of erythritol is converted into butadiene by the action of sodium iodide and zinc, he demonstrated (with A. Cohen) that nonterminal unsaturation may be conveniently introduced into alditol derivatives by reaction of contiguous secondary sulfonates with sodium iodide and zinc dust in boiling A.A-dimethylformamide. This Tipson-Cohen reaction subsequently proved of great utility in other hands for the conversion of more complex carbohydrate structures into vicinal dideoxy derivatives. 

Nucleophilic displacement using [ F] fluoride works well in aUphatic systems where reactive haUdes or sulfonates esters can undergo substitution at unhindered sites. In order to introduce a F fluorine atom in a secondary or tertiary position, a two steps strategy was developed. It involves a F-bromofluorination of alkenes, followed by reductive debromination (n-BujSnH, AIBN). [ F]BrF is usually generated in situ from [ F]potassium fluoride and l,3-dibromo-5,5-dimethylhydantoin (DBH) in sulfuric acid. This methodology was successfully applied to label steroids at the 11 and 6a positions [245] (Scheme 60) and to prepare [ F]fluorocyclohexanes [246]. 

Section 7.8). Other classes of derivatives are thus most conveniently prepared from the sulfonyl chloride. Reaction with an alcohol leads to formation of a sulfonate ester. Two common sulfonyl chloride reagents employed to make sulfonate esters from alcohols arep-toluenesulfonyl chloride, known as tosyl chloride, and methanesulfonyl chloride, known as mesyl chloride (see Section 6.1.4). Note the nomenclature tosyl and mesyl for these groups, which may be abbreviated to Ts and Ms respectively. 

---