Glasses combined techniques

If 2-D NMR techniques are really useful then 3-D ones must be even more so... shouldn t they A number of 3-D experiments have been devised which are in fact, produced by merging two, 2-D experiments together. The results could never be plotted in true 3-D format since etching them into an A3-sized block of glass would not be practical and viewing them as some sort of holographic projection, would probably not be feasible In essence, 3-D spectra have to be viewed as slices through the block which effectively yield a series of 2-D experiments. It is possible to combine techniques to yield experiments such as the HMQC-COSY and the HSQC-TOCSY. 

Gas Chromatographic Analysis. We used temperature programmed glass capillary gas chromatography to separate PCB residues. Use of an electron capture detector required an efficaceous sample cleanup for isomer quantitation (27). These combined techniques offered enhanced separations and enabled us to identify and quantitate individual PCB constituents (jL> 27). Schwartz (27) separated more than 100 constituents from a 1 1 1 1 mixture of Aroclors 1242, 1248, 1254, and 1260. 

Polymer materials find a wide application in replication technologies for producing structures with submicron elements of intricate shapes and for nano-scale surface replication [1-4]. They show considerable promise for smoothing out the surface roughness to obtain good-quality inexpensive substrates used in fabrication of X-ray optic components [5,6], In this work, the features of silicon wafer surface replication by polymers were studied by atomic-force microscopy (AFM) and X-ray reflectometry (XRR) with a view to applying this replication technique to produce smooth polymer-glass combination substrates to be used in multilayer X-ray mirrors. 

In general, one wants to combine the distance measurement with some kind of resolution enhancement, in order to determine which sites are close to which. This is not always possible. For example, in many inhomogeneous solids, only one (broad) resonance will be observed, even with MAS or similar techniques. A well-studied example is sodium in a glass. Because techniques like MAS average the dipole-dipole coupling to zero, if they do not provide... 

Cao] DTA in combination with glass fluxing technique 10 to 84 at.% at Co/Fe = 0.33, 1 and 3, liquidus temperatures, melt separation temperatures... 

Traditionally, production of metallic glasses requites rapid heat removal from the material (Fig. 2) which normally involves a combination of a cooling process that has a high heat-transfer coefficient at the interface of the Hquid and quenching medium, and a thin cross section in at least one-dimension. Besides rapid cooling, a variety of techniques are available to produce metallic glasses. Processes not dependent on rapid solidification include plastic deformation (38), mechanical alloying (7,8), and diffusional transformations (10). 

There ai e noted the most convenient, simple and chip methods, which ensure the high quality of specimens and can be easily combined with different techniques for analytical pre-concentration of impurities. In particulaidy, it is proposed to make specimens in the form of gel, film or glass in the case of XRF analysis of concentrates obtained by low-temperature crystallization of aqueous solutions. One can prepai e film or organogel specimens from organic concentrates obtained by means of extraction of impurities by organic solvent. Techniques for XRF analysis of drinking, natural and wastewater using considered specimens ai e adduced. 

The SFA, originally developed by Tabor and Winterton [56], and later modified by Israelachvili and coworkers [57,58], is ideally suited for measuring molecular level adhesion and deformations. The SFA, shown schematically in Fig. 8i,ii, has been used extensively to measure forces between a variety of surfaces. The SFA combines a Hookian mechanism for measuring force with an interferometer to measure the distance between surfaces. The experimental surfaces are in the form of thin transparent films, and are mounted on cylindrical glass lenses in the SFA using an appropriate adhesive. SFA has been traditionally employed to measure forces between modified mica surfaces. (For a summary of these measurements, see refs. [59,60].) In recent years, several researchers have developed techniques to measure forces between glassy and semicrystalline polymer films, [61-63] silica [64], and silver surfaees [65,66]. The details on the SFA experimental procedure, and the summary of the SFA measurements may be obtained elsewhere (see refs. [57,58], for example.). 

Glass polyalkenoate cement has a unique combination of properties. It adheres to tooth material and base metals. It releases fluoride over a long period and is a cariostat. In addition it is translucent and so can be colour-matched to enamel. New clinical techniques have been devised to exploit the unique characteristics of the material. 

The glass polyalkenoate cement uniquely combines translucency with the ability to bond to untreated tooth material and bone. Indeed, the only other cement to possess translucency is the dental silicate cement, while the zinc polycarboxylate cement is the only other adhesive cement. It is also an agent for the sustained release of fluoride. For these reasons the glass polyalkenoate cement has many applications in dentistry as well as being a candidate bone cement. Its translucency makes it a favoured material both for the restoration of front teeth and to cement translucent porcelain teeth and veneers. Its adhesive quality reduces and sometimes eliminates the need for the use of the dental drill. The release of fluoride from this cement protects neighbouring tooth material from the ravages of dental decay. New clinical techniques have been devised to exploit the unique characteristics of the material (McLean Wilson, 1977a,b,c Wilson McLean, 1988 Mount, 1990). 

The synthesis of MNCGs can be obtained by sol-gel, sputtering, chemical vapor-deposition techniques. Ion implantation of metal or semiconductor ions into glass has been explored since the last decade as a useful technique to produce nanocomposite materials in which nanometer sized metal or semiconductor particles are embedded in dielectric matrices [1,2,4,23-29]. Furthermore, ion implantation has been used as the first step of combined methodologies that involve other treatments such as thermal annealing in controlled atmosphere, laser, or ion irradiation [30-32]. 

The latest innovation is the introduction of ultra-thin silica layers. These layers are only 10 xm thick (compared to 200-250 pm in conventional plates) and are not based on granular adsorbents but consist of monolithic silica. Ultra-thin layer chromatography (UTLC) plates offer a unique combination of short migration distances, fast development times and extremely low solvent consumption. The absence of silica particles allows UTLC silica gel layers to be manufactured without any sort of binders, that are normally needed to stabilise silica particles at the glass support surface. UTLC plates will significantly reduce analysis time, solvent consumption and increase sensitivity in both qualitative and quantitative applications (Table 4.35). Miniaturised planar chromatography will rival other microanalytical techniques. 

---