Geometrical isomers properties

The value of many chemical products, from pesticides to pharmaceuticals to high performance polymers, is based on unique properties of a particular isomer from which the product is ultimately derived. Eor example, trisubstituted aromatics may have as many as 10 possible geometric isomers whose ratio ia the mixture is determined by equiHbrium. Often the purity requirement for the desired product iacludes an upper limit on the content of one or more of the other isomers. This separation problem is a compHcated one, but one ia which adsorptive separation processes offer the greatest chances for success. 

Maleic and fiimaric acids have physical properties that differ due to the cis and trans configurations about the double bond. Aqueous dissociation constants and solubiUties of the two acids show variations attributable to geometric isomer effects. X-ray diffraction results for maleic acid (16) reveal an intramolecular hydrogen bond that accounts for both the ease of removal of the first carboxyl proton and the smaller dissociation constant for maleic acid compared to fumaric acid. Maleic acid isomerizes to fumaric acid with a derived heat of isomerization of —22.7 kJ/mol (—5.43 kcal/mol) (10). The activation energy for the conversion of maleic to fumaric acid is 66.1 kJ/mol (15.8 kcal/mol) (24). 

Other minor raw materials are used for specific needs. Eumaric acid [110-17-8] the geometric isomer of maleic acid, is selected to maximize thermal or corrosion performance and is the sole acid esterified with bisphenol A diol derivatives to obtain optimum polymer performance. CycloaUphatics such as hydrogenated bisphenol A (HBPA) and cyclohexanedimethanol (CHDM) are used in selective formulations for electrical apphcations. TetrahydrophthaUc anhydride [85-43-8] (THPA) can be used to improve resiUence and impart useful air-drying properties to polyester resins intended for coating or lining apphcations. 

When additional substituents ate bonded to other ahcycHc carbons, geometric isomers result. Table 2 fists primary (1°), secondary (2°), and tertiary (3°) amine derivatives of cyclohexane and includes CAS Registry Numbers for cis and trans isomers of the 2-, 3-, and 4-methylcyclohexylamines in addition to identification of the isomer mixtures usually sold commercially. For the 1,2- and 1,3-isomers, the racemic mixture of optical isomers is specified ultimate identification by CAS Registry Number is fisted for the (+) and (—) enantiomers of /n t-2-methylcyclohexylamine. The 1,4-isomer has a plane of symmetry and hence no chiral centers and no stereoisomers. The methylcyclohexylamine geometric isomers have different physical properties and are interconvertible by dehydrogenation—hydrogenation through the imine. 

Table 3 fists cycloaliphatic diamines. Specific registry numbers are assigned to the optical isomers of /n t-l,2-cyclohexanediamine the cis isomer is achiral at ambient temperatures because of rapid interconversion of ring conformers. Commercial products ate most often marketed as geometric isomer mixtures, though large differences in symmetry may lead to such wide variations in physical properties that separations by classical unit operations are practicable, as in Du Font s fractional crystallisation of /n t-l,4-cyclohexanediamine (mp 72°C) from the low melting (5°C) cis—trans mixture. 

Cycloahphatic diamines which have reacted with diacids to form polyamides generate performance polymers whose physical properties are dependent on the diamine geometric isomers. (58,74). Proprietary transparent thermoplastic polyadipamides have been optimized by selecting the proper mixtures of PDCHA geometric isomers (32—34) for incorporation (75) ... 

Methylenedi(cyclohexyhsocyanate) (45) [5124-30-1] (MDCHl, Desmodur W) is the dominant derivative of MDCHA and is used in light-stable urethanes. Polyurethane physical properties are dependent on the diamine geometric isomer composition used for the derivative diisocyanate which reacts with diol (87). 

A similar type of isomerism occurs for [Ma3b3] octahedral complexes since each trio of donor atoms can occupy either adjacent positions at the comers of an octahedral face (/hcial) or positions around the meridian of the octahedron (meridional). (Fig. 19.12.) Geometrical isomers differ in a variety of physical properties, amongst which dipole moment and visible/ultraviolet spectra are often diagnostically important. 

I wo geometrical Isomers. These have been separated and seem to differ in some degree in their endocrine properties. 

Two or more species with different physical and chemical properties but the same formula are said to be isomers of one another. Complex ions can show many different kinds of isomerism, only one of which we will consider. Geometric isomers are ones that differ only in the spatial orientation of ligands around the central metal atom. Geometric isomerism is found in square planar and octahedral complexes. It cannot occur in tetrahedral complexes where all four positions are equivalent... 

Because a double bond between two carbons prevents the carbons from rotating, isomers involving the atoms bonded to the carbons are possible, as shown above with dichloroethylene. Such isomers are called geometrical isomers, in contrast to the structural isomers discussed previously. When the substiuent groups are on the same side of the molecule, the compound is designated the cis- isomer. When the substituent groups are on the opposite side, the compound is the trans- isomer. Like all isomers, cis- and trans-isomers have the same molecular formula, but differ in certain physical and chemical properties. For example, cw-l,2-dichloroethylene boils at 60°C whereas 1,2-dichloroethylene boils at 48°C. 

Evidence can be presented to show that rotation around a C-C single bond happens readily, but rotation around a C=C double bond does not. Consider the compound, CH2C1CH2C1. No matter how this compound is synthesized, there is only one compound that is made with that formula. However, when CHC1CHC1 is prepared, there are two different compounds made with that formula. We call these two compounds geometric isomers. One is labeled cis and the other is trans. They have different physical and chemical properties. If there were free rotation around a double bond, this could not happen. 

The isomer distribution of the nickel catalyst system in general is similar qualitatively to that of the Rh catalyst system described earlier. However, quantitatively it is quite different. In the Rh system the 1,2-adduct, i.e., 3-methyl-1,4-hexadiene is about 1-3% of the total C6 products formed, while in the Ni system it varies from 6 to 17% depending on the phosphine used. There is a distinct trend that the amount of this isomer increases with increasing donor property of the phosphine ligands (see Table X). The quantity of 3-methyl-1,4-pentadiene produced is not affected by butadiene conversion. On the other hand the formation of 2,4-hexadienes which consists of three geometric isomers—trans-trans, trans-cis, and cis-cis—is controlled by butadiene conversion. However, the double-bond isomerization reaction of 1,4-hexadiene to 2,4-hexadiene by the nickel catalyst is significantly slower than that by the Rh catalyst. Thus at the same level of butadiene conversion, the nickel catalyst produces significantly less 2,4-hexadiene (see Fig. 2). 

Diastereoisomers are stereoisomers which do NOT have a mirror image of one another. Figure 11.20 shows the diastereoisomers of 2-butene (alkenes such as this are sometimes called geometric isomers and are a consequence of the prohibition of rotation about double bonds). If a vertical mirror was placed between the two structures in Fig. 11.20 they would not reflect onto one another. If the functionality is on the same side then the isomer is the cis-form, if on the opposite side then it is the trans- form. The chemical properties are very similar because the functional groups are identical. However, as they have different shapes their physical properties are different. Interconversion requires breaking and remaking bonds so these isomers are also stable under normal conditions. 

Lie and coworkers31 reported the synthesis and NMR properties of all geometrical isomers of conjugated linoleic acids. Pure geometric isomers of conjugated linoleic acid (CLA) were prepared from castor oil as the primary starting material. Methyl octadeca-9Z, 11 /i-dienoate (36) and methyl octadeca-9Z,llZ-dienoate (38) were obtained by zinc reduction of methyl santalbate (35, methyl octadec-11 -en-9-ynoatc) and methyl... 

Since all the physical properties of two given enantiomers are the same in the absence of a chiral, or optically active, medium, their chromatographic resolution needs a different approach from the relatively simple separation of geometrical isomers, stereoisomers or positional isomers. Two methods are used. The older technique of indirect resolution, requires conversion of the enantiomers to diastereoisomers using a suitable chiral reagent, followed by separation of the diastereoisomers on a non-chiral GC or LC stationary phase. This technique has now been largely superseded by direct resolution, using either a chiral mobile phase (in LC) or a chiral stationary phase. A variety of types of chiral stationary phase have been developed for use in GC, LC and SFC(21 23). 

Returning to our example, you will find that there are two geometric isomers of but-2-ene. One is referred to as the cis isomer and the other is the trans isomer. It is important to remember that geometric isomers are different compounds and have distinct physical properties. For example, ds-but-2-ene melts at -139°C, whereas trans-but-2-ene melts at -105°C. 

Double bonds are not freely rotatable (see p.4). If double-bonded atoms have different substituents, there are two possible orientations for these groups. In fumaric acid, an intermediate of the tricarboxylic acid cycle (see p. 136), the carboxy groups lie on different sides of the double bond (trans or E position). In its isomer maleic acid, which is not produced in metabolic processes, the carboxy groups lie on the same side of the bond (cis or Z position). Cis-trans isomers (geometric isomers) have different chemical and physical properties—e.g., their melting points (Fp.) and pl

Dichloroethylene is a mixture of two geometric isomers, cis and trans-, the proportion of the cis isomer to the trans isomer varies from mixture to mixture, depending on the manufacturer s specifications. The properties of the mixture are expected to be similar to those of the individual isomers. 

The configuration with the bromines adjacent is called cis (from the Latin derivative for on this side ), whereas that with bromines opposite is called trans (which means on the other side ). The two configurations are different substances with unique chemical and physical properties. They are described as geometric isomers. (See Figure 6-l4.)... 

---