Fumarates cycloaddition

A ver promising reactivity of A-2-thiazoline-4-one has been found recently. 5-Aryl-A-2-thiazoline-4-one (190) gives the 1.3-dipolar cycloaddition product (191) with methyl fumarate and methyl maleate... 

Reaction of arninoacetonitrile hydrochloride with sodium nitrite provides diazoacetonittile (62). The product undergoes a 1,3-dipolar cycloaddition with diethyl fumarate to yield a pyrazoline intermediate, which without isolation reacts with ammonia in water to furnish the pyrazole [119741-54-7] (63) (eq. 14) (43). 

More recently, Cheeseman and coworkers have investigated cycloaddition reactions of 2,6-dioxypyrazines (80jCS(Pl)1603). 2,6-Dihydroxy-3,5-diphenylpyrazine (77) reacts with electron deficient dienophiles such as iV-phenylmaleimide, diethyl maleate and diethyl fumarate (Scheme 26) to yield adducts of the 3,8-diazabicyclo[3.2.1]octane class such as (78). This reaction is believed to proceed by way of the betaine (79) and has precedent (69AG(E)604) in that photolysis of the bicyclic aziridine (80) generates analogous betaines which have been trapped in cycloaddition reactions. 

The Diels-Alder cycloaddition reaction (Section 14.4) is a pericvclic process that takes place between a diene (four tt electrons) and a dienophile (two tr electrons) to yield a cyclohexene product. Many thousands of examples of Diels-Alder reactions are known. They often take place easily at room temperature or slightly above, and they are stereospecific with respect to substituents. For example, room-temperature reaction between 1,3-butadiene and diethyl maleate (cis) yields exclusively the cis-disubstituted cyclohexene product. A similar reaction between 1,3-butadiene and diethyl fumarate (trans) yields exclusively the trans-disubstituted product. 

The discovery that Lewis acids can promote Diels-Alder reactions has become a powerful tool in synthetic organic chemistry. Yates and Eaton [4] first reported the remarkable acceleration of the reactions of anthracene with maleic anhydride, 1,4-benzoquinone and dimethyl fumarate catalyzed by aluminum chloride. The presence of the Lewis-acid catalyst allows the cycloadditions to be carried out under mild conditions, reactions with low reactive dienes and dienophiles are made possible, and the stereoselectivity, regioselectivity and site selectivity of the cycloaddition reaction can be modified [5]. Consequently, increasing attention has been given to these catalysts in order to develop new regio- and stereoselective synthetic routes based on the Diels-Alder reaction. 

The importance of the relationship between the macrocycle cavity and the binding of two reagents is shown by the cycloadditions of cyclopentadiene with diethyl fumarate and ethyl acrylate in aqueous solution. The presence of jS-CD strongly accelerates the first cycloaddition, while it slows down the reaction rate of the second, probably because the cavity favors the binding of two molecules of either diene or dienophile [65c]. 

The results of Diels-Alder reactions of cyclopentadiene with diethyl fumarate, diethyl maleate and ethyl acrylate carried out in SC-H2O are reported in Scheme 6.32 [79]. The cycloaddition of diethyl fumarate occurred with low yield. 

A sequential cycloaddition, tandem cycloreversion-cycloaddition process is more efficient than the direct cycloaddition, especially in case of aliphatic aldehydes, where the corresponding ylides are rather unstable. The cycloreversion strategy lowers the concentration of the free ylide in the reaction mixture and avoids side reactions such as self-condensation of this reactive species. In some cases, this tandem cycloreversion-cycloaddition sequence provides improved chemical yields without any loss of diastereoselectivity. For example, compound 476 treated with methyl fumarate, methyl maleate, and methyl acrylate provides acceptable yields of compounds 477-479 (Scheme 80) <2000S1170, 2002S1885>. 

EvenPd(OAc)2 is not effective in catalyzing the cyclopropanation of a,P-unsaturated nitriles by ethyl diazoacetate. Instead, vinyloxazoles 92 are formed from acrylonitrile or methacrylonitrile by carbenoid addition to the CsN bond 143 Diethyl maleate and diethyl fumarate as well as polyketocarbenes are by-products in these reactions the 2-pyrazoline which would result from initial [3 + 2] cycloaddition at the C=C bond and which is the sole product of the uncatalyzed reaction at room temperature, can be avoided completely by very slow addition of the diazoester... 

Dipolarophiles D14. The 1,3-dipolar cycloaddition of nitrones to dimethyl maleate and dimethyl fumarate is widely used in the synthesis of polyhydroxy alkaloid derivatives of dihydroindolizidinone (81), pyrrolizidine (119), (—)-codonopsinine, and (+ )-hyacinthacines Ai and A2 (312). In cases of unstable nitrones, syntheses of cycloadducts are performed in situ (81). 

The preparation of partially reduced derivatives in which the five-membered ring is reduced is less well documented. In a series of papers, Huisgen reported the 1,3-dipolar reactivity of isoquinolinium imide 41 in which loss of aromaticity occurs during cycloaddition <1998EJ0379, 1998EJ0387, 1998T9848>. Cycloaddition of this compound with dimethyl fumarate or maleate gives 42 and 43 as mixture of diastereoisomers (Scheme 15). 

Examples of the stereoselective cycloaddition are shown below. The trans disubstitution is kept in the reaction with dimethyl fumarate [168]. 

In the [2 + 2] cycloadditions of 10 with iV-phenylmaleimide and dimethyl fumarate, the major cycloadducts were formed with a very high degree of ee transfer from 1,3-dimethylallene8. Similar results were obtained in the reaction of 10 with 1,1-dichloro-2,2-difluoroethene. The reaction with less reactive 1,1-diphenylethene did not lead to cycloadduct formation, but resulted in racemization of the chiral 1,3-dimethylallene instead9, which implies reversible formation of the diradical intermediate in this case. Finally, the cycloaddition of 1,3-dimethylallene to methyl propiolate (14) afforded two cycloadducts, 15 and 16, to which >40% of the initial ee had been transferred (equation 5)11. 

The transition metal-catalyzed reaction of diazoalkanes with acceptor-substituted alkenes is far more intricate than reaction with simple alkenes. With acceptor-substituted alkenes the diazoalkane can undergo (transition metal-catalyzed) 1,3-dipolar cycloaddition to the olefin [651-654]. The resulting 3//-pyrazolines can either be stable or can isomerize to l//-pyrazolines. 3//-Pyrazolines can also eliminate nitrogen and collapse to cyclopropanes, even at low temperatures. Despite these potential side-reactions, several examples of catalyzed cyclopropanations of acceptor-substituted alkenes with diazoalkanes have been reported [648,655]. Substituted 2-cyclohexenones or cinnamates [642,656] have been cyclopropanated in excellent yields by treatment with diazomethane/palladium(II) acetate. Maleates, fumarates, or acrylates [642,657], on the other hand, cannot, however, be cyclopropanated under these conditions. 

The 3 + 2-cycloaddition of 1,2-dithiophthalides with nitrilimines yields benzo[c]thio-phenespirothiadiazoles regioselectively. The azomethineimines isoquinolinium-iV-aryllimide and A-(2-pyridyl)imide readily undergo 1,3-dipolar cycloaddition with electron-deficient dipolarophiles, dimethyl fumarate and dimethyl maleate, to yield tetrahydropyrazolo[5,l-a]isoquinolines in high yield. ° The 1,3-dipolar cycloadditions of electron-poor 1,3-dipoles, bicyclic azomethine ylides (27), with ( )-l-A,A-dimethylaminopropene to yield cycloadducts (28) and (29) are examples of non-stereospecific cycloadductions (Scheme 9). The synthesis of protected... 

The [3 -f 2] cycloaddition of aziridines and dipolarophiles, like dimethyl acetylenedicarboxylate or dimethyl fumarate and maleate, was investigated by Gaebert and Mattay. Via C—C and C—bond cleavage five-membered heterocycles are formed in moderate yields. The different product ratios dependent on the reaction conditions (PET/direct excitation/thermal reaction) gave insights to the reaction details and are summarized in the proposed mechanism (Scheme 52) [84],... 

Addition of electron-poor alkenes such as /ran -stilbene, diethyl fumarate and maleate, and fumaronitrile to (50) do not cause nitrogen evolution. Even on heating cycloaddition products were not isolated, although decomposition was induced. Addition of bases such as benzylamine had no influence on the decomposition rate <78JCS(P1)1440>. 

The meso-ionic l,3-dithiol-4-ones (134) participate - in 1,3-dipolar cycloaddition reactions giving adducts of the general type 136. They show a remarkable degree of reactivity toward simple alkenes including tetramethylethylene, cyclopentene, norbomene, and norbor-nadiene as well as toward the more reactive 1,3-dipolarophilic olefins dimethyl maleate, dimethyl fumarate, methyl cinnamate, diben-zoylethylene, A -phenylmaleimide, and acenaphthylene. Alkynes such as dimethyl acetylenedicarboxylate also add to meso-ionic 1,3-dithiol-4-ones (134), but the intermediate cycloadducts are not isolable they eliminate carbonyl sulfide and yield thiophenes (137) directly. - ... 

Photochemical cycloaddition reactions between sydnones (1) and 1,3-dipolarophiles take place to give products which are different from, but isomeric with, the thermal 1,3-dipolar cycloaddition products. These results are directly interpreted in terms of reactions between the 1,3-dipolarophiles and Ae nit mine (316). The photochemical reactions between sydnones and the following 1,3-dipolarophiles have been reported dicyclopentadiene, dimethyl acetylene dicarboxylate, dimethyl maleate, dimethyl fumarate, indene, carbon dioxide, and carbon disulfide. ... 

The cycloaddition of substituted acrylates has been investigated with cyclic nitronate 24 (Table 2.49) (14). The cycloaddition of a 1,1-disubstituted dipolar-ophile (entry 2), proceeds in good yield, but both 1,2-disubstituted alkenes fail to react. The effect of substitution pattern on the dipolarophile was investigated with a slightly more reactive nitronate (Table 2.50) (228). Less sterically demanding alkenes such as cyclohexene, cyclopentene, and methyl substituted styrenes react, albeit at elevated temperature. The only exception is the 1,1-disubstituted alkene (entry 4), which reacts at room temperature. Both stilbene and dimethyl fumarate fail to provide the desired cycloadduct. In a rare example of the dipolar cycloaddition of tetra-substituted alkenes, tetramethylethylene reacts at 50 °C over 3 days to give a small amount of the cycloadduct (entry 7). 

Enders et al. (53) reported the use of chiral l,3-dioxan-5-ylamines in condensation reactions with aromatic aldehydes to form ylides in situ, which underwent thermal cycloaddition reactions with excellent yields. Treatment of 193 with benzaldehyde or p-fluorobenzaldehyde in the presence of excess dimethyl fumarate or fumaronitrile gave rise to the expected adducts in 85% yield with a >96% diastereomeric excess. For nitriles (R = CN), the endo/exo selectivity was higher at 70 30 than for the esters (R = C02Me) at 55 45 (Scheme 3.56). 

Numerous examples involving the preparation of tetrahydrothiophenes via [3 + 2] cycloaddition of thiocarbonyl ylides with electron-poor alkenes have been reported. Thiobenzophenone (5)-methylide (16), generated from 2,5-dihydro-1,3,4-thiadiazole (15) and analogous compounds, react with maleic anhydride, N-substituted maleic imide, maleates, fumarates, and fumaronitrile at —45°C (28,91,93,98,128,129). Similar reactions with adamantanethione (5)-methylide (52) and 2,2,4,4-tetramethyl-3-thioxocyclobutanone (5)-methylide (69) occur at ca. +45°C and, generally, the products of type 70 were obtained in high yield (36,94,97,130) (Scheme 5.25). Reaction with ( )- and (Z)-configured dipolaro-philes stereospecifically afford trans and cis configured adducts. 

An attempted synthesis of biotin using thiocarbonyl ylide cycloaddition was carried out (131,133,134). The crucial step involves the formation of the tetrahydrothiophene ring by [3 + 2] cycloaddition of a properly substituted thiocarbonyl ylide with a maleic or fumaric acid derivative (Scheme 5.27). As precursors of the thiocarbonyl ylides, compounds 25a, 72, and 73 were used. Further conversion of cycloadducts 74 into biotin (75) required several additional steps including a Curtius rearrangement to replace the carboxylic groups at C(3) and C(4) by amino moieties. 

The formation of spirocyclopropanes from the reaction of diazodiphenylmethane and ( )-8-phenylmenthyl esters of acrylic acid and methyl fumarate occurred with a modest level of diastereofacial selectivity (136). In contrast, diastereoselectivities of 90 10 were achieved in the cycloadditions of diazo(trimethylsilyl)methane with acrylamides 65 derived from camphor sultam as the chiral auxiliary (137) (Scheme 8.16). Interestingly, the initial cycloadducts 66 afforded the nonconjugated A -pyrazolines 67 on protodesilylation the latter were converted into optically active azaproline derivatives 68. In a related manner, acrylamide 69 was converted into A -pyrazolines 70a,b (138). The major diastereoisomer 70a was used to synthesize indolizidine 71. The key step in this synthesis involves the hydrogenolytic cleavage of the pyrazoline ring. 

This French group (145) has also been able to divert the usual Diels-Alder cycloaddition pathway of Reissert salts with oleftnic esters to a 1,3-dipolar cycloaddition pathway by the addition of triethylamine. In addition, mtinchnone imine 243 can be trapped with dipolarophiles to furnish 244 (146). No Diels-Alder cycloadducts derived from the oxazolium salt were detected. In contrast, fumarate... 

When the a-substituent is methyl (R = Me), deprotonation occurs readily with NEt3 at room temperature. Although the cycloaddition step of the resultant ylide with sterically less hindered or reactive dipolarophiles (A-methylmaleimide, methyl acrylate, methyl methacrylate, and dimethyl fumarate) proceeds faster than the ylide generation step, the cycloaddition step becomes rate determining if sterically... 

Murahashi and co-workers (49) extensively studied the synthesis of nitrones such as 29 by a decarboxylative oxidation of proline derivatives (Scheme 12.12). However, these nitrones were primarily used in nucleophilic addition reactions rather than 1,3-dipolar cycloadditions. Others have synthesized cyclic nitrones 30 and 31 having a chiral center adjacent to the nitrogen atom (50,51). Saito and co-workers (51) applied nitrone 31 in reactions with fumaric and maleic acid... 

---