From acyl halides reaction with carboxylic acids

Carboxylic acid hydiazides are prepared from aqueous hydrazine and tfie carboxylic acid, ester, amide, anhydride, or halide. The reaction usually goes poody with the free acid. Esters are generally satisfactory. Acyl halides are particularly reactive, even at room temperature, and form the diacyl derivatives (22), which easily undergo thermal dehydration to 1,3,4-oxadiazoles (23). Diesters give dihydtazides (24) and polyesters such as polyacrylates yield a polyhydrazide (25). The chemistry of carboxyhc hydrazides has been reviewed (83,84). 

Diaryl sulfones can be formed by treatment of aromatic compounds with aryl sulfonyl chlorides and a Friedel-Crafts catalyst. This reaction is analogous to Friedel-Crafts acylation with carboxylic acid halides (11-14). In a better procedure, the aromatic compound is treated with an aryl sulfonic acid and P2O5 in polypho-sphoric acid. Still another method uses an arylsulfonic trifluoromethanesulfonic anhydride (ArS020S02CF3) (generated in situ from ArS02Br and CF3S03Ag) without a catalyst. ... 

As with carboxylic acids obtained by palladium hydroxycarbonylation, their derivatives esters, amides, anhydrides and acyl halides are synthesized from alkenes, CO and HX (X = OR, NR2 etc.). The Pd-catalyzed methoxycarbonylation is one of the most studied reactions among this type of catalyzed carbonylations and has been reviewed and included in reports of homogeneous catalysis.625, 26 The methoxycarbonylation has been applied to many different substrates to obtain intermediates in organic syntheses as well as specific products. For instance, the reaction has been applied for methoxycarbonylation of alkynes666 Highly efficient homogeneous Pd cationic catalysts have been reported and the methoxycarbonylation of alkynes has been used to develop economically attractive and environmentally benign process for the production of methyl... 

This reaction represents the best general method for amide preparation. Cold, concentrated aqueous ammonia is used as in the preparation of iso-butyramide (83%),or the reaction may be carried out by passing dry ammonia into a solution of the acyl halide in anhydrous ether as in the formation of cyclopropanecarboxamide (91%). Separation of the amide from ammonium chloride is usually accomplished by extraction of the amide by organic solvents. Aqueous sodium hydroxide is employed to take up the hydrogen chloride when amine hydrochlorides are used in place of the free amines as in the preparation of N-methylisobutyramide (75%). When phosphorus trichloride is added to a mixture of an amine and a carboxylic acid, phosphazo compounds, RN=PNHR, rather than acyl halides, are believed to be intermediates. These compounds have been shown to react with carboxylic acids to give amides. ... 

Conductivity measurements have revealed that DMF and carboxylic acid chlorides form salt-like adducts (22) in an equilibrium reaction (equation 12). Such adducts can be prepared either from DMF and acid halides (chlorides and bromides) or from chloromethyleneiminium salts and salts of carboxylic acids. Acyloxyiminium salts (23) can be prepared in the pure state by reacting acid amides with carboxylic acid chlorides in the presence of silver trifluoromethanesulfonate (equation 13). Salts of type (24 equation 14) are regarded as being intermediates in the synthesis of ketones from carboxylic acids and Grignard reagents in the presence of a-chloroenamines as well as in the preparation of acyl halides (F, Cl, Br, I) by action of a-haloenamines on carboxylic acids. ... 

A new decarboxylative route to free radicals, which has proved particularly successful in preparative work, embodies the thermal (or photochemical) decomposition reaction of 1-hy-droxypyridine-2(l/f)-thione esters 23 with tributyltin hydride, /er/-butanethiol, or a similar hydrogen donor.These esters can be easily prepared from acyl halides and the sodium salt of l-hydroxypyridine-2(l//)-thione, or from the carboxylic acid, dicyclohexylcarbodiimide and l-hydroxypyridine-2(l/f)-thione. The intermediate radicals were readily reduced to the corresponding hydrocarbons 24 in efficient chain reactions with organotin hydrides or thiols as reaction partners, and the proportion of rearranged to unrearranged products could be controlled by the choice of hydrogen donor, its concentration and the temperature. This system was sufficiently quantitative and well behaved for use in kinetic studies, and the rate constants of the (S-scission reactions of the listed cyclopropylmethyl species were determined. 

Acylations with carboxylic acids and anhydrides have been carried out with sulfuric acid as both solvent and catalyst, the reactive acylating agents from acyl halides probably being haloacyloxonium ions. Trifluoroacetic anhydride offers a rather milder reagent for reactions of carboxylic acids, with mixed anhydrides being likely intermediates. However, polyphosphoric acid remains the most widely used dehydrating agent for acylations by carboxylic acids. 

Phosphoramidites (89), derived from enamines, react with carboxylic acids in an irreversible manner because of the low basicity of the eliminated enamine. The anhydrides (90) may also conveniently be obtained from enol phosphites. Reactions of (89) with phenol were also studied and the kinetics found to be characteristic for bimolecular processes . In contrast to other carboxylic acid halides, acyl fluorides give tervalent phosphorus fluorides with tervalent esters (Scheme 7). ... 

After acyl halides, acid anhydrides are the most reactive carboxylic acid derivatives. Although anhydrides can be prepared by reaction of carboxylic acids with acyl chlorides as was shown in Table 19.1, the three most commonly used anhydrides are industrial chemicals and are prepared by specialized methods. Phthalic anhydride and maleic anhydride, for example, are prepared from naphthalene and butane, respectively. 

The use of carbodiimides with amines and carboxylic acids is of particular interest in the preparation of polypeptides as well as in the synthesis of other amides from starting materials bearing other functional groups which may be capable of undergoing competing reactions with one of the reagents (e.g., acyl halides are usually not suitable for the preparation of amides of aminocarbinols, while aminocarbinols with carboxylic acids and a carbodiimide yield only amides). 

The reaction of acyl halides with carboxylic acids affords good yields of simple and mixed anhydrides. The use of pyridine or triethylamine helps to remove the hydrogen chloride by-product. However, the preparation of benzoic anhydride from benzoic acid and benzoyl chloride has also been carried out in the absence of trialkylamines by heating under reduced pressure, in the presence of zinc chloride or by refluxing in chlorohydrocarbons such as methylene chloride. 

The formulated mechanism is supported by the finding that no halogen from the phosphorus trihalide is transferred to the a-carbon of the carboxylic acid. For instance, the reaction of a carboxylic acid with phosphorus tribromide and chlorine yields exclusively an a-chlorinated carboxylic acid. In addition, carboxylic acid derivatives that enolize easily—e.g. acyl halides and anhydrides—do react without a catalyst present. 

Unsymmetrical as well as symmetrical anhydrides are often prepared by the treatment of an acyl halide with a carboxylic acid salt. The compound C0CI2 has been used as a catalyst. If a metallic salt is used, Na , K , or Ag are the most common cations, but more often pyridine or another tertiary amine is added to the free acid and the salt thus formed is treated with the acyl halide. Mixed formic anhydrides are prepared from sodium formate and an aryl halide, by use of a solid-phase copolymer of pyridine-l-oxide. Symmetrical anhydrides can be prepared by reaction of the acyl halide with aqueous NaOH or NaHCOa under phase-transfer conditions, or with sodium bicarbonate with ultrasound. 

These reactions are most important for the preparation of acyl fluorides. " Acyl chlorides and anhydrides can be converted to acyl fluorides by treatment with polyhydrogen fluoride-pyridine solution" or with liquid HF at — 10°C. Formyl fluoride, which is a stable compound, was prepared by the latter procedure from the mixed anhydride of formic and acetic acids. Acyl fluorides can also be obtained by reaction of acyl chlorides with KF in acetic acid or with DAST. Carboxylic esters and anhydrides can be converted to acyl halides other than fluorides by the inorganic acid halides mentioned in 10-77, as well as with PhsPXa (X = Cl or but this is seldom done. Halide exchange can be carried out in a... 

The reaction between acyl halides and diazomethane is of wide scope and is the best way to prepare diazo ketones. Diazomethane must be present in excess or the HX produced will react with the diazo ketone (10-74). This reaction is the first step of the Amdt-Eistert synthesis (18-8). Diazo ketones can also be prepared directly from a carboxylic acid and diazomethane or diazoethane in the presence of dicyclohexyl-carbodiimide. ... 

---