Framework crystallinity

The most commonly employed crystalline materials for liquid adsorptive separations are zeolite-based structured materials. Depending on the specific components and their structural framework, crystalline materials can be zeoUtes (silica, alumina), silicalite (silica) or AlPO-based molecular sieves (alumina, phosphoms oxide). Faujasites (X, Y) and other zeolites (A, ZSM-5, beta, mordenite, etc.) are the most popular materials. This is due to their narrow pore size distribution and the ability to tune or adjust their physicochemical properties, particularly their acidic-basic properties, by the ion exchange of cations, changing the Si02/Al203 ratio and varying the water content. These techniques are described and discussed in Chapter 2. By adjusting the properties almost an infinite number of zeolite materials and desorbent combinations can be studied. 

High degrees of dealumination are difficult to achieve using AHFS compared with those obtained via hydrothermal treatment, because of loss of framework crystallinity. The characterisation techniques used here have shown that silicon enrichment occurs during the AHFS treatment, leading to higher bulk Si/Al ratios. 7a1 MAS NMR appears to show the presence of aluminium species other than those teU a- or octahedrally co-ordinated. These may be the fluorinated aluminium species mentioned in earlier works. The textural properties of AHFS treated zeolites are not changed relative to the parent material in contrast to the steam dealuminated zeolites, where the introduction of secondary mesopores occurs. 

Zeolites (section C2.13) are unique because they have regular pores as part of their crystalline stmctures. The pores are so small (about 1 nm in diameter) that zeolites are molecular sieves, allowing small molecules to enter the pores, whereas larger ones are sieved out. The stmctures are built up of linked SiO and AlO tetrahedra that share O ions. The faujasites (zeolite X and zeolite Y) and ZSM-5 are important industrial catalysts. The stmcture of faujasite is represented in figure C2.7.11 and that of ZSM-5 in figure C2.7.12. The points of intersection of the lines represent Si or A1 ions oxygen is present at the centre of each line. This depiction emphasizes the zeolite framework stmcture and shows the presence of the intracrystalline pore stmcture. In the centre of the faujasite stmcture is an open space (supercage) with a diameter of about 1.2 nm. The pore stmcture is three dimensional. 

The traditional definition of a zeolite refers to microporous, crystalline, hydrated aluminosilicates with a tliree-dimensional framework consisting of comer-linked SiO or AlO tetrahedra, although today the definition is used in a much broader sense, comprising microporous crystalline solids containing a variety of elements as tetrahedral building units. The aluminosilicate-based zeolites are represented by the empirical fonmila... 

The diffusion, location and interactions of guests in zeolite frameworks has been studied by in-situ Raman spectroscopy and Raman microscopy. For example, the location and orientation of crown ethers used as templates in the synthesis of faujasite polymorphs has been studied in the framework they helped to form [4.297]. Polarized Raman spectra of p-nitroaniline molecules adsorbed in the channels of AIPO4-5 molecular sieves revealed their physical state and orientation - molecules within the channels formed either a phase of head-to-tail chains similar to that in the solid crystalline substance, with a characteristic 0J3 band at 1282 cm , or a second phase, which is characterized by a similarly strong band around 1295 cm . This second phase consisted of weakly interacting molecules in a pseudo-quinonoid state similar to that of molten p-nitroaniline [4.298]. 

Fig. 21 a-c. Schematic representation supramolecular structure of a crystalline rigid-chain polymer (a), an idealized ECC of a flexible-chain polymer (b) and an orientationally crystallized sample with a spatial ECC framework (c)... 

The structure of CaB contains bonding bands typical of the boron sublattice and capable of accommodating 20 electrons per CaB formula, and separated from antibonding bands by a relatively narrow gap (from 1.5 to 4.4 eV) . The B atoms of the B(, octahedron yield only 18 electrons thus a transfer of two electrons from the metal to the boron sublattice is necessary to stabilize the crystalline framework. The semiconducting properties of M B phases (M = Ca, Sr ", Ba, Eu, Yb ) and the metallic ones of M B or M B5 phases (Y, La, Ce, Pr, Nd ", Gd , Tb , Dy and Th ) are directly explained by this model . The validity of these models may be questionable because of the existence and stability of Na,Ba, Bft solid solutions and of KB, since they prove that the CaB -type structure is still stable when the electron contribution of the inserted atom is less than two . A detailed description of physical properties of hexaborides involves not only the bonding and antibonding B bands, but also bonds originating in the atomic orbitals of the inserted metal . ... 

Most of the microporous and mesoporous compounds require the use of structure-directing molecules under hydro(solvo)thermal conditions [14, 15, 171, 172]. A serious handicap is the application of high-temperature calcination to develop their porosity. It usually results in inferior textural and acidic properties, and even full structural collapse occurs in the case of open frameworks, (proto) zeolites containing small-crystalline domains, and mesostructures. These materials can show very interesting properties if their structure could be fully maintained. A principal question is, is there any alternative to calcination. There is a manifested interest to find alternatives to calcination to show the potential of new structures. 

MicrocrystalUne zeolites such as beta zeolite suffer from calcination. The crystallinity is decreased and the framework can be notably dealuminated by the steam generated [175]. Potential Br0nsted catalytic sites are lost and heteroatoms migrate to extra-framework positions, leading to a decrease in catalytic performance. Nanocrystals and ultrafine zeolite particles display aggregation issues, difficulties in regeneration, and low thermal and hydrothermal stabilities. Therefore, calcination is sometimes not the optimal protocol to activate such systems. Application of zeolites for coatings, patterned thin-films, and membranes usually is associated with defects and cracks upon template removal. 

Ni [182], V [183], and A1 [184]. SU-M [185] is a mesoporous germanium oxide with crystalline pore walls, possessing one of the largest primitive cells and the lowest framework density of any inorganic material. The channels are defined by 30-rings. Structural and thermal information show that there exists a mismatch between framework stability and template decomposition. The latter requires temperatures higher than 450 °C, while the structure is preserved only until 300 °C. 

To demonstrate the utilities of salt inclusion, we review the selected zeoUte-like transition-metal-containing open frameworks (TMCOFs) and then describe the structures of non-centrosymmetric solids (NCSs) and, finally, report crystalline solids containing a periodic array of transition metal nanostructures. In particular, we will address the issues concerning the role that molten salt has in... 

Zeolites form a unique class of oxides, consisting of microporous, crystalline aluminosilicates that can either be found in nature or synthesized artificially [J.M. Thomas, R.G. Bell and C.R.A. Catlow in Handbook of Heterogeneous Catalysis (Ed. G. Ertl, H. Knbzinger and J. Weitkamp) (1997), Vol. 1, p. 206, VCH, Weinheim.]. The zeolite framework is very open and contains channels and cages where cations, water and adsorbed molecules may reside and react. The specific absorption properties of zeolites are used in detergents, toothpaste, and desiccants, whereas their acidity makes them attractive catalysts. 

---