Fluorescence effect yield

A substantial effort has been appHed to iacreaskig i by stmctural modification (114), eg, the phthalaziQe-l,4-diones (33) and (34) which have chemiluminescence quantum yields substantially higher than luminol (115,116). The fluorescence quantum yield of the dicarboxylate product from (34) is 14%, and the yield of singlet excited state is calculated to be 50% (116). Substitution of the 3-amino group of lumiaol reduces the CL efficiency > 10 — fold, whereas the opposite effect occurs with the 4-amino isomer (117). A series of pyridopyridaziae derivatives (35) have been synthesized and shown to be more efficient than luminol (118). 

The effect of forming a more rigid structure in fluorescent dyes of the rhodamine series has been clearly demonstrated (18) with the remarkable dye designated Rhodamine 101 [41175A3-3] (19). This dye has its terminal nitrogen atoms each held in two rings and has a fluorescence quantum yield of virtually 100% independent of the temperature. 

Flere C is the volume concentration of j-phase particles is the mass concentration of the analyte in the j-phase particles w is the x-ray fluorescence radiation yield t. is the mass absorption coefficient of the analyte for the primar y radiation d. is the j-phase particle effective size r fs... 

Solid-surface room-temperature phosphorescence (RTF) is a relatively new technique which has been used for organic trace analysis in several fields. However, the fundamental interactions needed for RTF are only partly understood. To clarify some of the interactions required for strong RTF, organic compounds adsorbed on several surfaces are being studied. Fluorescence quantum yield values, phosphorescence quantum yield values, and phosphorescence lifetime values were obtained for model compounds adsorbed on sodiiun acetate-sodium chloride mixtures and on a-cyclodextrin-sodium chloride mixtures. With the data obtained, the triplet formation efficiency and some of the rate constants related to the luminescence processes were calculated. This information clarified several of the interactions responsible for RTF from organic compounds adsorbed on sodium acetate-sodium chloride and a-cyclodextrin-sodium chloride mixtures. Work with silica gel chromatoplates has involved studying the effects of moisture, gases, and various solvents on the fluorescence and phosphorescence intensities. The net result of the study has been to improve the experimental conditions for enhanced sensitivity and selectivity in solid-surface luminescence analysis. 

Luminescence experiments in dichloromethane solution indicated that the fluorescence of the phenylacetylene branches is quenched, whereas intense emission is observed from the binaphthol core. This antenna effect represents the first example of efficient (>99%) energy migration in an optically pure dendrimer. The fluorescence quantum yield increases slightly with increasing generation the values of 0.30,0.32, and 0.40 were obtained, respectively, for 10-12. 

Additionally, note that the polarity of the solvent significantly affects not only the positions of absorption and fluorescence spectra but also the fluorescence quantum yields. The largest difference in quantum yield is observed for G19 (eight times larger in toluene) [86]. The effect of solvent polarity on quantum yield and fluorescence lifetime was investigated in mixtures of toluene and ACN (polarity range 0.013-0.306). Polarity dependent quantum yield and lifetime measurements are presented in Fig. 22. 

On the other hand, the introduction of halide substituents at the C-2 and C-6 position decreases fluorescence quantum yields and gives a bathochromic shift of emission maxima. For example, bromine at the C-2 and C-6 position in compound 14b deteriorates fluorescence quantum yields from 0.95 (14a) to 0.45 and the emission maximum is red-shifted by 42 nm. Moreover, iodine at the C-2,6 position in compound 14d gives the similar bathochromic shift to bromine (14b, 44 nm) and more dramatic reduction in quantum yields (almost nonfluorescent, photophysical properties were interpreted as the heavy atom effect of halides on a BODIPY core skeleton. The bathochromic shift of BODIPY dyes without dramatic decrease in quantum yield was observed by the introduction of vinyl substituents at the C-2 and C-6 position. The extension of conjugation... 

Forster Th, Hoffmann G (1971) Die Viskositatsabhangigkeit der Fluoreszenzquantenaus-beuten einiger Farbstoffsysteme [effect of viscosity on the fluorescence quantum yield of some dye systems], Z Phys Chem 75 6376... 

Most studies of the physical binding of hydrocarbon metabolites and metabolite model compounds have measured the effect of DNA binding on hydrocarbon fluorescence intensities, fluorescence lifetimes and UV absorption spectra Radioactive labelling has also been used, but less frequently. Spectroscopic methods are particularly convenient. These methods, especially fluorescence methods, are also very sensitive. All of the hydrocarbons in Figure 1 except the epoxides have high fluorescence quantum yields, which permit routine detection in the 10 -10 7 M concentration range. 

The effects of spacer length on the fluorescence quantum yields of the benzofurazan compounds bearing a donor-acceptor system were reported <2002MI11>. 

In 1888, Walter studied the quenching of fluorescence, by the concentration effect, of fluorescein solutions. Nicols and Merrit observed in 1907, in solutions of eosine and resoruflne, the symmetry existing between their absorption and fluorescence spectra. In 1910, Ley and Engelhardt determined the fluorescence quantum yield of various benzene derivatives, values that were still referred to until recent years [18], The works by Lehmann and Wood, around 1910, marked the beginning of analysis based on fluorescence [4],... 

Assign differences in fluorescence quantum yield to differences in the electronic configuration of SI, substituent effects, molecular rigidity and the presence or absence of heavy atoms. 

A number of factors relating to the molecular structure of an organic compound and its environment have an effect on the fluorescence quantum yield, which, as we have seen, is dependent on the relative rates of the competing processes that may occur from Si(v = 0). These molecular factors are given below. 

Substituent groups have a marked effect on the fluorescence quantum yield of many compounds. Electron-donating groups such as -OH, -NH2 and -NR.2 enhance the fluorescence efficiency, whereas electron-withdrawing groups such as -CHO, -C02H and -N02 reduce the fluorescence quantum yield, as shown by naphthalene and its derivatives in Table 4.3. 

Table 4.2 The effect of molecular rigidity on fluorescence quantum yield measured in solution at room temperature...

Table 4.4 The effect of the internal heavy atom effect on the fluorescence efficiency of naphthalene and its derivatives. Fluorescence quantum yields determined in solid solution at 77K...

It is difficult to predict the effect of surface functionalization on the optical properties of nanoparticles in general. Surface ligands have only minor influence on the spectroscopic properties of nanoparticles, the properties of which are primarily dominated by the crystal field of the host lattice (e.g., rare-earth doped nanocrystals) or by plasmon resonance (e.g., gold nanoparticles). In the case of QDs, the fluorescence quantum yield and decay behavior respond to surface functionalization and bioconjugation, whereas the spectral position and shape of the absorption and emission are barely affected. 

Among several fluorescence properties, fluorescence quantum yield and lifetime are the two most important characteristics of a fluorophore. Studies of the effects of the silica nanomatrixes on these two characteristics reveal the mechanism of enhanced fluorescence intensity of DDSNs. 

Montalti and co-workers studied dansyl [27] and pyrene [28] derivatives and found the fluorescence quantum yields and excited-state lifetime of these two dyes increased in DDSNs. They attributed the enhancements to the shielding effect from the quenchers or polar solvent in the suspension. Their studies also demonstrated that the lifetime of the doped dye molecules was also dependent on the size of the DDSNs. Small DDSNs had a larger population of the short-living moieties that were more sensitive to the environment outside the DDSN. In contrast, the large DDSN had a larger population of the long-living moieties that were not sensitive to the environment. 

The results regarding the effect of the silica matrix on the fluorescence quantum yield showed some disagreements. In contrast to the enhanced fluorescence quantum yield, the same [68] or decreased quantum yields [69] in DDSNs were reported... 

As mentioned above, phosphorescence is observed only under certain conditions because the triplet states are very efficiently deactivated by collisions with solvent molecules (or oxygen and impurities) because their lifetime is long. These effects can be reduced and may even disappear when the molecules are in a frozen solvent, or in a rigid matrix (e.g. polymer) at room temperature. The increase in phosphorescence quantum yield by cooling can reach a factor of 103, whereas this factor is generally no larger than 10 or so for fluorescence quantum yield. 

In conclusion, lifetimes and quantum yields are characteristics of major importance. Obviously, the larger the fluorescence quantum yield, the easier it is to observe a fluorescent compound, especially a fluorescent probe. It should be emphasized that, in the condensed phase, many parameters can affect the quantum yields and lifetimes temperature, pH, polarity, viscosity, hydrogen bonding, presence of quenchers, etc. Attention should be paid to possible erroneous interpretation arising from the simultaneous effects of several factors (for instance, changes in viscosity due to a variation in temperature). 

However, the heavy atom effect can be small for some aromatic hydrocarbons if (i) the fluorescence quantum yield is large so that de-excitation by fluorescence emission dominates all other de-excitation processes (ii) the fluorescence quantum yield is very low so that the increase in efficiency of intersystem crossing is relatively small (iii) there is no triplet state energetically close to the fluorescing state (e.g. perylene)10 . 

In the case of radiative transfer between identical molecules, the fluorescence decays more slowly as a result of successive re-absorptions and re-emissions. A simple kinetic model has been proposed by Birks (1970). It is based on the assumption of a unique value for the average probability a that an emitted photon is absorbed, i.e. without distinction between the generations of photons (a photon of generation n is emitted after n successive re-absorptions). This model leads to the following expressions for the effective lifetime and the macroscopic fluorescence quantum yield ... 

---