Flexibilizing

BP. These nitrile alloy membranes are compounded from PVC, flexibilized by the addition of butadiene—acrylonitrile copolymers, PVC, and other proprietary ingredients. Typically reinforced with polyester scrim, NBP membranes are 1 mm thick and have a width of 1.5 m. They ate ptedominandy used in mechanically fastened roofing systems. NBP membranes exhibit excellent teat and puncture resistance as well as good weatherabihty, and remain flexible at low temperatures. They ate resistant to most chemicals but ate sensitive to aromatic hydrocarbons. The sheet is usually offered in light colors. The physical characteristics of NBP membranes have been described (15). 

The epoxidation is generally conducted in two steps (/) the polyol is added to epichlorohydrin in the presence of a Lewis acid catalyst (stannic chloride, boron triduoride) to produce the chlorohydrin intermediate, and (2) the intermediate is dehydrohalogenated with sodium hydroxide to yield the aliphatic glycidyl ether. A prominent side-reaction is the conversion of aliphatic hydroxyl groups (formed by the initial reaction) into chloromethyl groups by epichlorohydrin. The aliphatic glycidyl ether resins are used as flexibilizers for aromatic resins and as reactive diluents to reduce viscosities in resin systems. 

Plasticizers. Plasticizers are materials that soften and flexibilize inherently rigid, and even britde polymers. Organic esters are widely used as plasticizers in polymers (97,98). These esters include the benzoats, phthalates, terephthalates, and trimeUitates, and aUphatic dibasic acid esters. Eor example, triethylene glycol bis(2-ethylbutyrate) [95-08-9] is a plasticizer for poly(vinyl butyral) [63148-65-2] which is used in laminated safety glass (see Vinyl POLYMERS, poly(vinyl acetals)). Di(2-ethyUiexyl)phthalate [117-81-7] (DOP) is a preeminent plasticizer. Variation of acid and/or alcohol component(s) modifies the efficacy of the resultant ester as a plasticizer. In phthalate plasticizers, molecular sizes of the alcohol moiety can be varied from methyl to tridecyl to control permanence, compatibiUty, and efficiency branched (eg, 2-ethylhexyl, isodecyl) for rapid absorption and fusion linear (C6—Cll) for low temperature flexibiUty and low volatility and aromatic (benzyl) for solvating. Terephthalates are recognized for their migration resistance, and trimeUitates for their low volatility in plasticizer appHcations. 

Butyl latex can be used in packaging and as a tackifying and flexibilizing additive in higher strength adhesives for adhesion of polyethylene and polypropylene. 

Flexibilized epoxy resins are important structural adhesives [69]. Liquid functionally terminated nitrile rubbers are excellent flexibilizing agents for epoxy resins. This liquid nitrile rubber can be reacted into the epoxy matrix if it contains carboxylated terminated functionalities or by adding an amine terminated rubber. The main effects produced by addition of liquid nitrile rubber in epoxy formulations is the increase in T-peel strength and in low-temperature lap shear strength, without reducing the elevated temperature lap shear. 

The addition of a single monochromating crystal gives the device great flexibil ity, since one has independent control over the collimation, by the number of reflections, and the bandpass, controlled by the width of the reflection of the monochromating crystal. Figure 2.16 shows one variant, a three-reflection... 

Flexibilizing groups include methylene and ethylene oxides, dimethylsiloxanes, and methylene groups. 

PVC is flexibilized by addition of plasticizers as already noted. It is also made more flexible through blending with elastomers that act as impact modifiers. These blends are used when impact resistance is essential. 

Most epoxy formulations contain diluents, fillers or reinforcement materials, and toughening agents. Diluents may be reactive (mono- and diepoxides) or nonreactive (di-n-butyl phthalate). Toughening (flexibilizing) agents such as low-molecular-weight polyesters or... 

Aromatic polymers such as PS are readily attacked by chlorine bromine, concentrated sulfuric acid, and nitric acid. These reactions do not decrease the degree of polymerization of the polymers. Aromatic polymers with stiffening groups, such as PPO, polyarylsulfone, polyarylether ketone (PEEK), and polyphenylene sulfide (PPS), are more resistant to attack by corrosives than those with flexibilizing groups. 

Since cellulose nitrate is intractable, in 1870 John W. Hyatt added camphor as a plasticizer to flexibilize this plastic. Some 60 years later, Waldo Semon used tricresyl phosphate as a plasticizer for PVC. Dialkyl phthalates, such as dioctyl phthalate (DOP) and other alkyl phthalates which replaced the more toxic tricresyl phosphate, are now used as plasticizers primarily for PVC at an annual rate of 1 million tons. 

Many copolymers are said to be internally plastidzed because of the flexibilization brought about by the presence of a second repeating unit in the polymer chain. In contrast. DOP and other liquid plastidzers are said to be external plastidzers. The presence of bulky pendant groups on the polymer increases segmental motion, and the flexibility of the polymer increases as the size of the pendant group increases. However, linear pendant groups with more than 10 carbon atoms reduce flexibility because of side chain crystallization. 

Vinylite is the most widely used vinyl chloride copolymer. This copolymer is not as strong nor as resistant to corrosives as rigid PVC but is more readily processed. PVC is flexibilized by blending it with elastomers (impact modifiers). These ductile blends of PVC and impact modifiers are more widely used when impact resistance is essential. 

Liquid polymers with terminal mercapto groups (LP-2) are obtained when solid polyolefin poiysulfides are reduced. These liquid polymers may be oxidized to solid polymers in the presence of oxidizing agents, such as lead oxides. The liquid polymers are used in caulking compositions and as reactive flexibilizing agents in epoxy resins. 

These polyesters were investigated by W. H. Carothers in the 1930 s, but they were not commercialized at that time because of their high flexibility and low melting point (54 ) which made then unsuitable for use as fibers that could withstand the heat of a flat iron. They are used as flexibilizers for other polymers and as reactants for polyurethanes. (PUs). 

Polymers having many flexibilizing groups (CH2, O), such as polyethylene. polyisoprene, and polysiloxanes (silicones), are flexible. Other less-flexible polymers may be flexibilized by the introduction of flexibilizing groups. For example, polybutylene terephthalate (PBT) is more flexible than polyethylene terephthalate (PET), and nylon 11 is less rigid than nylon 6. 

Intractable polymers, such as polyvinyl chloride (PVC), may be flexibilized, to some extent, by the formation of copolymers, such as the copolymers of vinyl chloride and vinyl acetate or octyl acrylate, or by the addition of nonvolatile low-molecular-weight compounds (plasticizers) having solubility parameters similar to those of the polymer. Thus PVC is plasticized by the addition of dioctyl phthalate. The flexibility of these products is proportional to the amount of plasticizer added. Copolymers, such as the vinyl chloride-vinyl acetate copolymer, require less plasticizer to obtain the same degree of flexibility. 

Anhydrides generally provide pot lives of days or months and cure usually at 100-180°C with very little exotherm. Tertiary amines accelerate the time for gelation but still require the elevated temperature cure to obtain optimum properties. Anhydrides usually give brittle products but the addition of polyether flexibilizing groups yields more elastomeric products [44]. 

Novolac epoxy flexibilizers Improve low and high temperature characteristics of novolac epoxy resins for inhibition of composite rocket propellants [164]. 

Similar to composite propellants, flexibilized epoxy or novolac epoxy resins reinforced with fillers or fibers are used for inhibition of fuel-rich propellants. 

---