Fibers product forms

Spinnerette Process. The basic spinning process is similar to the production of continuous filament yams and utilizes similar extmder conditions for a given polymer (17). Fibers are formed as the molten polymer exits the >100 tiny holes (ca 0.2 mm) of each spinnerette where it is quenched by chilled air. Because a key objective of the process is to produce a relatively wide (eg, 3 m) web, individual spinnerettes are placed side by side in order that sufficient fibers be generated across the width. This entire grouping of spinnerettes is often called a block or bank, and in commercial production it is common for two or more blocks to be used in tandem in order to increase the coverage and uniformity of laydown of the fibers in the web. 

The property of mesophase that makes it suitable for carbon fiber and premium coke manufacture is that it forms ordered stmctures under stress which persist following carbonization. However, most carbon fiber production in the 1990s is based on polyacrylonitrile (PAN). 

Because of their unique blend of properties, composites reinforced with high performance carbon fibers find use in many structural applications. However, it is possible to produce carbon fibers with very different properties, depending on the precursor used and processing conditions employed. Commercially, continuous high performance carbon fibers currently are formed from two precursor fibers, polyacrylonitrile (PAN) and mesophase pitch. The PAN-based carbon fiber dominates the ultra-high strength, high temperature fiber market (and represents about 90% of the total carbon fiber production), while the mesophase pitch fibers can achieve stiffnesses and thermal conductivities unsurpassed by any other continuous fiber. This chapter compares the processes, structures, and properties of these two classes of fibers. 

The mesophase pitches used for high-modulus carbon fiber production can be formed either by the thermal polymerization of petroleum- or coal tar-based... 

Characteristic of the microstructure of PET fibers in their final production form is the occurrence of three types of polymer phases crystalline, mesomorphous, and amorphous. The first phase is the result of crystalline aggregation of PET molecules, the second phase—of mesomorphous or, in other words, paracrys-talline aggregation, the third phase—of amorphous aggregation. The mesomorphous and amorphous phases together form a noncrystalline part of the fiber. 

In this book, the CVD applications are classified by product functions such as electrical, opto-electrical, optical, mechanical and chemical. This classification corresponds roughly to the various segments of industry such as the electronic industry, the optical industry, the tool industry, and the chemical industry. CVD applications are also classified by product forms such as coatings, powders, fibers, monoliths, and composites. 

A weed, which is a form of a natural resource, is simply a living organism whose presence conflicts with the interests of people. Undesirable as they may be, weed species are natural occurrences in the agricultural ecosystems created by man s food and fiber production. Over 300,000 species of plants inhabit the earth, but only 30,000 of these are weeds. About 1,800 weed species cause serious economic losses in crop production, and about 300 weed species are serious in cultivated crops throughout the world. Most cultivated crops are plagued by 10 to 30 weed species that must be controlled to avoid yield reductions (1). 

Nitropyrene was the sole product formed from the gas-phase reaction of pyrene with OH radicals in a NOx atmosphere (Arey et al, 1986). Pyrene adsorbed on glass fiber filters reacted rapidly with N2O5 to form 1-nitropyrene. When pyrene was exposed to nitrogen dioxide, no reaction occurred. However, in the presence of nitric acid, nitrated compounds were produced (Yokley et al, 1985). Ozonation of water containing pyrene (10-200 pg/L) yielded short-chain aliphatic compounds as the major products (Corless et al, 1990). A monochlorinated pyrene was the major product formed during the chlorination of pyrene in aqueous solutions. At pH 4, the reported half-lives at chlorine concentrations of 0.6 and 10 mg/L were 8.8 and <0.2 h, respectively (Mori et al, 1991). 

Cellulose acetate fibers are defined by the Textile Fiber Products Identification Act as manufactured fibers in which the fiber-forming substance is cellulose acetate in which not less than 92% of the hydroxyl groups are acetylated. Cellulose triacetate is employed to make many tricot fabrics and sportswear. Cellulose triacetate textile is shrink- and wrinkle-resistant and easily washed. 

The arhcle of Berejka covers the state of the art in electron beam technology, material technology, and product-forming technology as applied to structural carbon-fiber-reinforced polymeric composites. 

Carbon materials used for the commercial synthesis of carbon fluoride include natural graphite, petroleum coke, activated carbon, carbon black and carbon fiber. Experimental carbon materials include residual carbon, exfoliated graphite, fullerenes and other unique carbons and carbon inserts. The degree of graphitization of carbon material varies continuously, so it is not simple to define the exact boundary between carbon and graphite. The product formed... 

---