Features and Performance

The ROTOBERTY internal recycle laboratory reactor was designed to produce experimental results that can be used for developing reaction kinetics and to test catalysts. These results are valid at the conditions of large-scale plant operations. Since internal flow rates contacting the catalyst are known, heat and mass transfer rates can be calculated between the catalyst and the recycling fluid. With these known, their influence on catalyst performance can be evaluated in the experiments as well as in production units. Operating conditions, some construction features, and performance characteristics are given next. 

AMX-SS-/1 Tank. Some AMX tanks have been equipped with four SS-It antitank missiles mounted in fire position in front of turret. Missiles are manufd by NORD Aviation, weigh 62.7 lbs and carry a shaped charge. Maximum range is 11480 ft and can be reached in 22 sec. Missiles are wire guided AMX Personnel Carrier Vehicle weighs 13M tons and has same technical features and performance as its parent tank. It can carry 12 men plus a driver. Onboard armament consists of 7.5mm machine gun in a 360° turret. 

The acceptance of the laboratory characterization of tests will be based on the kinds of information usually included in a methods development paper. FSIS suggests that supporting data be submitted in a publication format or, as a reprint, if the information has already been published. The information should include the purpose of the test, the analyte and matrix (including the species), a summary of the technique, its unique features, and performance characteristics such as limit of detection, limit of reliable measurement, and precision. The performance near regulatory decision points is of particular importance. As would be expected of a method development paper, the reagents, equipment, and the details of the method must be thoroughly described. 

Cutler PD, Cherry SR, Hoffman EJ et al (1992). Design features and performances of a PET system for animal research. J Nucl Med 33 595 Cherry SR, Sorensen JA, Phelps ME (2003). Physics in nuclear medicine, 3rd ed. W.B. Saunders, Philadelphia... 

Gilbert, A.J. (1998) Design guidelines, features and performance characteristics and development of current pesticide containers. Proceedings, BCPC Symposium No. 70 Managing Pesticide Waste and Packaging, pp. 9-16. 

Bolognini, M., Cavani, F., Scagliarini, D., Flego. C Perego, C. and Saba. M. (2003). Mg/AI mixed oxides prepared by coprccipitation and sol-gel routes a comparison of their physicochemical features and performances in m-crcsol mcthylation. Microporous ami Mesoporous Mater., 66. 77-89. 

Universal Display Corporation. 2008. Features and performance of PHOLEDs. WWW.universaldisplay.com/default.asp contentlD=604 (accessed August 20, 2008). 

Case study III. Fukuoka SWRO is the largest desalination plant in Japan with a capacity of 50,000 m /d. It was commissioned in 2005—2006. The plant specifications and operating conditions are given in Table 3.5 [53,54]. The plant is of special interest because of its various different design features and performance [59] ... 

Select gloves that offer the optimal combination of features and performance. Periodically reevaluate your choices with your employees. 

The field of analytical instrumentation systems is one of the most rapidly progressing areas of science and technology. This rapid development is facilitated by (1) the advances in numerous areas of research that collectively provide the impact on the design features and performance capabilities of new analytical instrumentation systems and by (2) the technological and market demands to solve practical measurement problems. 

The fast reactor database (FRDB) summarized in this report is very detailed. It includes operational parameters, physical, hydraulic and thermomechanical characteristics, technological requirements, methods and criteria to ensure safe operation design data like dimensions, materials information and main design features and performance parameters of reactor cores, components, and various systems, along with sketches and drawings. 

Structural features and performance of LaNii- Rh Oa system for the dry reforming of methane. Appl. Catal A, 344 (1-2), 10-19. 

Taking into account the Mars-van Krevelen mechanism, any enhanced oxygen vacancy densities can improve the oxidation activities of an oxide-based catalyst Perovskite-based materials can act as catalysts for NO SCR by H2 or hydrocarbons [72,73] or simultaneously reduce NO in the presence of PM under lean conditions [74-77]. The major drawback of such high-temperature crystal oxides is their low surface area, for example, <2-3 m /g. However, over the last years improved preparation methods and compositional control had a significant effect on materials features and performance of the perovskite-type catalysts [75,78-85] as illustrated in Figure 26.3. However, the performance of perovskite-based catalysts becomes remarkable when noble metal coexist, either as supported or as dopant or even in the form of a solid solution [15,17,81-86]. 

Jia, L., Gao, J Fang, W and Li, Q. (2012) Influence of copper content on structural features and performance of pre-reduced LaMni 4,Cue03 (0-o l) catalysts for methanol synthesis from CO2/H2. /. Rare Earths, 28, 747-751. 

Usually it requires a wedge biopsy of the lung to identify the histologic features and perform the necessary special studies for diagnosis. Occasionally, a transbronchial biopsy is sufficient to confirm recurrent disease, particularly when supported by immunohistochemistry or flow cytometry on cells studied from the bronchoalveolar lavage. In these cases, small specimens (transbronchial biopsy. 

Falcon, H., Barbero, J.A., Alonso, J.A., Martinez-Lope, M.J., and Fierro, J.L.G. SrFe03, 5 perovskite oxides Chemical features and performance for methane combustion. Chem. Mater 2002,14, 2325-2333. 

---