Soft Extracts

Extractum—extract, generally an alcoholic extract, but also other solvents can be used, e.g. ether for Filicis extmctum. Extracts may be fluid extracts (1 part drug to 1 part extract), soft extracts (75% solids) or dry extracts (95% solids). 

Subsequent evaporation of the solvents plus addition of the suitable excipients produce fluid extracts, soft extracts or dry extracts, depending on the final percent of humidity (Figure 8.5.2). 

Graham, R. C. Robertson, J. K. Analysis of Trihalomethanes in Soft Drinks, /. Chem. Educ. 1988, 65, 735-737. Trihalomethanes are extracted from soft drinks using a liquid-liquid extraction with pentane. Samples are analyzed using a packed column containing 20% OV-101 on 80/100 mesh Gaschrom Q equipped with an electron capture detector. 

Quarries that excavate soft stone, notably mad or chalk, do not dtiU or blast, but extract the stone usiag heavy-duty rippers and scrapers. In the Middle West and Florida, lake mads and soft coralline limestone are dredged ia a process much like stripmining. 

Liquid Fabric Softeners. The principal functions of fabric softeners are to minimize the problem of static electricity and to keep fabrics soft (see Antistatic agents). In these laundry additives, the fragrance must reinforce the sense of softness that is the desired result of their use. Most fabric softeners have a pH of about 3.5, which limits the materials that can be used in the fragrances. For example, acetals cannot be used because they break down and cause malodor problems in addition, there is the likelihood of discoloration from Schiff bases, oakmoss extracts, and some specialty chemicals. Testing of fragrance materials in product bases should take place under accelerated aging conditions (eg, 40°C in plastic bottles) to check for odor stabiUty and discoloration. 

Asphalt. This is a distillatioa residuum that can also be produced by propane deasphalting (Fig. 7) (33) and thereafter modified to meet specifications. For example, asphalt (qv) can be made softer by blending hard asphalt with the extract obtained ia the solveat treatmeat of lubricatiag oils. Oa the other hand, soft asphalts can be converted iato harder asphalts by oxidation (air blowiag). 

Elavored carbonated beverages, or soft drinks, were developed by apothecaries and chemists in the early nineteenth century by the addition of flavored symps to fountain-dispensed carbonated water. The introduction of proprietary flavors began in the late 1880s. Charles H. Hires introduced his root beer extract in 1876, Vemors s Ginger Ale was marketed by James Vernor in 1880, R. S. La2enby perfected the formula for Dr. Pepper in 1885, and John S. Pemberton developed the formula for Coca-Cola in 1886. Brad s Drink was introduced in 1896 and was later renamed Pepsi-Cola in 1898. 

Tissue Conditioners. Tissue conditioners are gels designed to alleviate the discomfort from soft-tissue injury, eg, extractions. Under a load, they exhibit viscous flow, forming a soft cushion between the hard denture and the oral tissues. The polymer in tissue conditioners is often the same as that used for resilient liners. The liquid is a plasticizer containing an alcohol of low volatility (219,220). 

Prior to the bating process, the hides are delimed with ammonium sulfate and/or ammonium chloride. Proteases are then appUed. The early preparation proposed by Rn hm was pancreatic trypsin. The use of a bating enzyme makes the hides soft and supple to prepare them for tanning. A new microbial protease, Pyrase 250 MP (82) (Novo Nordisk A/S) has been found to be a promising substitute for pancreatic trypsin [9002-07-7] which is more expensive because it must be extracted from pancreatic glands. 

These phenomena can be explained by the (hard-soft) acid-base principal as follows C=N-OH is a soft base, hence has stronger affinity towards soft basic metal cations than hard metal cations. The strong participation of the N-OH group in complex formation was further confirmed by the results shown for extraction experiments with 5 and 6. 

The nature of the donor atoms in the chelating agent. Ligands which contain donor atoms of the soft-base type form their most stable complexes with the relatively small group of Class B metal ions (i.e. soft acids) and are thus more selective reagents. This is illustrated by the reagent diphenylthiocarbazone (dithizone) used for the solvent extraction of metal ions such as Pd2+, Ag+, Hg2+, Cu2+, Bi3+, Pb2+, and Zn2 +. ... 

Chlorinated polyethylene CPEs provide a very wide range of properties from soft/ elastomeric to hard. They have inherent oxygen and ozone resistance, have improved resistance (compared to PEs) to chemical extraction, resist plasticizers, volatility, and weathering. Products do not fog at high temperatures as do PVCs and can be made flame retardant. 

These results, considered in relation to the direct addition tests of monomer and hydrogen cyanide in the previous table, demonstrate that there is no reason to expect styrene monomer extraction into soft drinks, even at levels well below those we can measure analytically. They also reinforce our hydrogen cyanide data. Further, they indicate that these beverages are not more extractive of Lopac containers than the normal simulating solvents. The tests confirm the chemical safety of the containers as beverage packages. 

Our studies of the absorption, permeation, and extraction properties of containers produced from high nitrile barrier resins have demonstrated that they meet or surpass the basic criteria established for retention of taste and odor characteristics of carbonated soft drinks. Sensory tests, which can isolate and identify end results as well as integrate collective effects, have confirmed this judgement and have established the general compatibility of these containers with a variety of beverage products from a taste and odor standpoint. Furthermore, these materials have the excellent physical properties required for containers which will find wide use in food and beverage packaging. 

Sodium hydroxide, NaOH, is a soft, waxy, white, corrosive solid that is sold commercially as lye. It is an important industrial chemical because it is an inexpensive starting material for the production of other sodium salts. The amount of electricity used to electrolyze brine to produce NaOH in the chloralkali process (Section 12.13) is second only to the amount used to extract aluminum from its ores. The process produces chlorine and hydrogen gases as well as aqueous socFinn hydroxide (Fig. 14.17). The net ionic equation for the reaction is... 

The basic process outline is depicted in Figure 5.2 moist un-roasted coffee beans and CO2 are fed counter-currently into the extractor under supercritical conditions. Caffeine is selectively extracted into the CO2 and this stream is led to a water-wash column to remove caffeine at a reduced pressure, the CO2 being recycled back to the extraction column. Extraction of the caffeine into water is necessary to avoid dropping the CO2 pressure too low, since compression is energy-intensive. There is now the problem of separating the caffeine (which is used in soft drinks and pharmaceu-... 

Soft extracts are made by concentrating the strong infusion to a water content of 20-25% (the catechin content is about 20% w/w). 

Thus, there was a total of 8 rats for evaluation in the control group and 12 in the experimental group. In the control group given an extract of fish alone, there were no neoplastic changes in the stomach or pancreas except an epithelial hyperplasia of the glandular stomach of one rat (Table 1), Instead, there were tumors in the testes, kidneys, and soft tissues, as are often seen in aged rats. 

---