Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Ethyl methoxy acetate

In addition, Kim et al. have chosen palladium nanoparticles entrapped in an AlO(OH) matrix as the racemisation catalyst combined with Novozym 435 to achieve the DKR of phenylglycine amide.With this combination of catalysts combined with various acyl donors, such as ethyl methoxy-acetate, ethyl acetate, ethyl phenyl acetate, or methyl p-hydroxyphenyl... [Pg.224]

Normally ethyl acetate is used for the acylation of primary amines, in many cases, as acyl donor and solvent. Other acylating agents such as alkyl methoxy acetates are... [Pg.180]

Mercuric acetate methoxy ethyl mercury acetate, phenyl mercury acetate... [Pg.1041]

The treatment of 2,5-dimethyl-4-azaindole with ethyl magnesium bromide, followed by benzyl chloride, gave 3-benzyl-2,5-dimethyl-4-azaindole. Cyanomethylation of 6-unsubstituted, 6-chloro-, and 6-methoxy-4-methyl-7-azaindole with potassium cyanide and formalin in ethanol at 120° gave the corresponding ethyl 3-acetates in 30, 32, and 3 % yields, respectively. No nitrile-containing product was isolated. [Pg.64]

Esters (solvents) n-Butyl acetate, wo-butyl acetate, ethyl acetate, l-butanol-3-methoxy acetate, l-ethoxy-2-propyl acetate, 1- methoxy-2-propyl acetate, Texanol, TXIB, 2- (2-butoxyethoxy)-ethyl acetate Solvent-based systems... [Pg.208]

Cyclododecane epoxide Cyclododecane epoxide, mixt. of cis- and trans-isomers. See Epoxycyclododecane Cyclododecane, (ethoxymethoxy)-. See Formaldehyde ethyl cyclododecyl acetal Cyclododecane, hexabromo-. See Hexabromocyclododecane Cyclododecane, 1,2,5,6,9,10-hexabromo-. See 1,2,5,6,9,10-Hexabromocyclododecane Cyclododecane, methoxy-. See Methoxycyclododecane Cyclododecane, (methoxymethoxy)-. See Formaldehyde methyl cyclododecyl acetal Cyclododecanol... [Pg.1115]

Ethoxyethoxy)-2-methoxy-4-(1 -propenyl) benzene 2-(1-Ethoxyethoxy)-5-(1-propenyl) anisole. See Acetaldehyde ethyl isoeugenyl acetal... [Pg.1679]

Pyrrolidine added to a soln. of 127 g. 5-methoxy-2-tetralone in benzene, refluxed 7 hrs. in a flask provided with a water separator, the benzene removed by distillation, the residue dissolved in dioxane, heated to reflux, ethyl bromo-acetate in dioxane added, and refluxing continued 22 hrs. under Ng 178 g. keto ester. R. W. Guthrie et al., Coll. 31, 602 (1966). [Pg.495]

Propanol, 1,3-dichloro-. See 1,3-Dichloro-2-propanol 2-Propanol, (1,1-dimethylethoxy)-. See Propylene glycol t-butyl ether 2-Propanol, 1-ethoxy-. See Propylene glycol ethyl ether Propanol, 1(or 2)-ethoxy-, acetate. See Propylene glycol ethyl ether acetate 2-Propanol, 1-methoxy. See Methoxyisopropanol 2-Propanol, 1-(2-methoxy-1-methylethoxy)-. See PPG-2 methyl ether Propanol, 1 (or 2)-(2-methoxymethyletho]v)-, acetate. See PPG-2 methyl ether acetate... [Pg.2399]

C5H10O3 methoxy-acetic acid ethyl ester 3938-96-3... [Pg.115]

METHOXYETHANOL (EGME) and 2-METHOXY ETHYL ACETATE (EGMEA) 2-Methoxyacetic acid in urine End of shift at end of workweek Nq... [Pg.87]

Bromo-4-methoxy-A-homo-estra-2,4,5(10)-trien-17-one (44 0. 2g), is dissolved in formic acid, 2 ml of boron trifluoride etherate is added and the mixture is stirred vigorously at 0° for 2 hr. A brown mass ca. 0.12 g) is obtained after evaporation of the solvents at reduced pressure. This material is diluted with water and extracted with chloroform. The chloroform extracts are washed successively with water and saturated salt solution, dried over anhydrous magnesium sulfate and evaporated at reduced pressure to give 95 mg of a product which is purified by filtration through a column of neutral alumina and crystallization of the residue after evaporation of the solvent from ethyl acetate-petroleum ether. The resulting A-homo-estra-l(10),2,4a-triene-4,17-dione (45), mp 143-146°, is identical to the tropone (45) prepared from monoadduct 17-ketone (43a). [Pg.371]

Methoxy-D-Homo-estra-l,3,5(10)-trien-17a-one (96)" (/) Acetic acid (6.4 ml) is added to a stirred solution of estrone methyl ether (93 1.1 g) in ethanol (35 ml) containing potassium cyanide (6 g) at 0°. After being stirred for 1 hr at 0° and 2.5 hr at room temperature, the reactants dissolve and potassium acetate preciptates. Water (65 ml) is added to the reaction mixture and the precipitated solid is collected by filtration. The crude product is dissolved in ethyl acetate and the ethyl acetate solution is washed with water, dried over anhydrous magnesium sulfate and evaporated to dryness under reduced pressure. Recrystallization of a portion of the crude product from cyclohexane-acetone gives 3-methoxy-17a-cyano-estra-l, 3,5(10)-trien-17j5-ol (94a) as needles mp 158.5°. [Pg.388]

Ethoxyacetylene, 74, 136, 138, 181 1 -Ethoxycyclohepta-1,3,5-triene, 365 1-Ethoxycyclohexene, 365 1 - Ethoxy-7,7-dichloronorcarane, 365 17a-Ethoxyethynylandrost-5-ene-3, 17 -diol 3-acetate, 181, 182 Ethoxyethynylmagnesium bromide, 138 21 -Ethoxy-3-methoxy-19-norpregna-1,3,5(10) -trien-20-yne-17 -oI, 139 Ethyl 3 -acetoxy-17/3-hydroxy-17 a-pregn-5-en-21-oate, 139... [Pg.458]

Ethanol, 2-methoxy-, 62 Ethanolamines, 62 Ethmylestradiol, 62 Ethion, 62 Ethoprophos, 63 2-Ethoxyethanol, 63 2-Ethoxyethyl acetate, 63 Ethyl acetates, 63 Ethyl acetylene, 63... [Pg.331]

Benzhydryl 3-carbamoyloxymethyl-7j3-(2-thienylacetamido)-70 -methoxydecephalosporanate (300 mg) in 0.5 ml in anisole and 2.5 ml of trifluoroacetic acid is reacted for 15 minutes at 10°C. The resulting mixture is evaporated at reduced pressure and flushed twice with anisole. The residue is dissolved in methylene chloride and extracted with 5% sodium bicarbonate solution. The aqueous solution is adjusted to pH 1. B with 5% phosphoric acid and extracted with ethyl acetate. The organic solution is dried and evaporated to yield the pure 3-carba-moyloxymethyl-70 -methoxy-7/3-(2-thienylacetamido)decephalosporanic acid, MP 165°C to 167°C. This may then be converted to the sodium salt. [Pg.269]

A mixture of 16.3 g of 4-methyl-6-methoxy-2-pyrimidinyl-hydrazine, 13.7 g of ethyl acetoacetate and 16.3 ml of methanol was refluxed 2 hours on a water bath. After a mixture of 4.7 g of sodium hydroxide, 4.7 ml of water and 27 ml of methanol was added dropwise thereto at about 50°C, the reaction mixture was refluxed for 2 hours more, then methanol was distilled off and the residue was dissolved in 130 ml of water. The solution was adjusted to pH 6 with acetic acid. The precipitate was filtered, washed with water and dried to give 24 g (yield 95.3%) of crystals, MP 97° to 98°C. Recrystallization from ligroin gave 1-(4 -methyl-6 -methoxy-2 -pyrimidinyl)-3-methyl-3-pyrazoline-5-one, MP 102° to 103°C. [Pg.564]

After evaporation of the solvent, a very thick, colorless oil is obtained. This base is dissolved by 200 ml of absolute ethanol and the quantity of HCI to obtain the dihydrochioride is added. It is left for a few hours over ice, dried, washed with approximately 100 ml of anhydrous ether in order to obtain 190 to 195 grams of 1-[2-phenyl-2-methoxy]-ethyl-4-[3-phenyl-3-hydroxy] -propyl-piperazine dihydrochioride after drying at 60°C in vacuo. The yield is 80%. It is recrystallized from absolute ethanol. The product is in the form of white crystalline powder, soluble in water, slightly soluble in alcohol, insoluble in ethyl acetate. [Pg.567]

To a stirred suspension of p-(p-methoxvbenzyloxy)-phenylmalonic acid (125 mg) in methylene chloride (3 ml) are added triethylamine (55 All) and oxalyl chloride (26 AH) at -15°C, and the suspension is stirred for 40 minutes at 0°C. The mixture Is added to a solution of diphenylmethyl 7 -amino-7a-methoxy-3-(1 -methyltetrazol-5-yl)thiomethyl-1 -oxadethia-3-cephem-4methylene chloride (3 ml) and pyridine (63 AH), and the mixture is stirred for 30 minutes at 0°C. The reaction mixture is diluted with ethyl acetate, washed with aqueous 2 N-hydrochloric acid and water, dried over sodium sulfate, and concentrated to give crude product (212 mg), which Is chromatographed on silica gel (20 g) and... [Pg.1039]

To a solution of 7 (d-p-hydroxyphenyl-0i-carboxyacetamido-7(l-methoxy-3-(1-methyl-tetrazol-5-vl)thiomethyl-1-oxadethia-3-cephem4-carboxylic acid (359 mg) in methanol (7 ml) is added a solution of sodium 2-ethylhexanoate in methanol (2 mols/liter 1.73 ml) at room temperature. After stirring for 10 minutes, the reaction mixture is diluted with ethyl acetate, stirred for 5 minutes, and filtered to collect separated solid, which is washed with ethyl acetate, and dried to give disodium salt of 7 (a-p-hydroxyphenyl-a-carboxyacetamido)-7Q -methoxy-3-(1-methyl-tetrazol-5-vl)thiomethyl-1-oxadethia-3-cephem4-carboxylic acid (342 mg). Yield 885%. Colorless powder. MP decomposition from 170°C. [Pg.1040]

Methyl ethyl (7-methoxy-10-methyl-3-phenthiazinyl)malonate is prepared by reacting a solution of sodium (4.37 grams) in anhydrous ethanol (110 cc) with a solution of methyl (7-methoxy-10-methyl-3-phenthiazinyl)acetate (59 grams) in ethyl carbonate (180 cc). [Pg.1322]


See other pages where Ethyl methoxy acetate is mentioned: [Pg.473]    [Pg.234]    [Pg.473]    [Pg.234]    [Pg.97]    [Pg.106]    [Pg.395]    [Pg.1020]    [Pg.1036]    [Pg.1066]    [Pg.737]    [Pg.467]    [Pg.26]    [Pg.149]    [Pg.652]    [Pg.54]    [Pg.982]    [Pg.436]    [Pg.444]    [Pg.141]    [Pg.495]    [Pg.96]    [Pg.120]    [Pg.727]    [Pg.1040]    [Pg.1041]    [Pg.1304]    [Pg.812]    [Pg.838]    [Pg.1052]   
See also in sourсe #XX -- [ Pg.473 , Pg.1435 ]




SEARCH



1- Ethyl-5-methoxy

Acetic methoxy

Methoxy acetate

© 2024 chempedia.info