Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Enantiomer chemical

Polak, E. H. and Provasi, J. (1992). Odor sensitivity to geosmin enantiomers. Chemical Senses 17,23-26. [Pg.500]

Several prominent types of host molecule, such as the steroidal bile acids and the cyclodextrins, are chiral natural products that are available as pure enantiomers. Chemical modification of these parent compounds provides an easy route to the preparation of large numbers of further homochiral substances. Since all these materials are present as one pure enantiomer, it automatically follows that their crystalline inclusion compounds must have chiral lattice structures. It is not currently possible to investigate racemic versions of these compounds, but the examples discussed previously in this chapter indicate that very different behaviour could result. [Pg.56]

An optimized version of the enantioselective SMB-GC unit was subsequently presented for enflurane enantiomers (chemical structure cf. insert in Figure 24) (Biressi et al., 2002b). It consisted of eight 80 cm x 15 mm (i.d.) stainless steel columns assembled in a home-made SMB-GC unit operated at 35°C (Scheme, cf. Figure 24). Each column with an adsorption bed volume of 140 ml each contained 20 % unpurified Lipodex E in the polysiloxane SE-54 and coated (17 %, w/w) on Chromosorb A (NAW, 20-30 mesh) 0.6 mm). This set-up represented the first gas-chromatographic SMB-GC unit for the preparative-scale separation of enantiomers. [Pg.293]

Laska, M., Teubner, P. 1999. "Olfactory Discrimination Ability of Human Subjects for Ten Pairs of Enantiomers." Chemical Senses, 24 161-170. [Pg.271]

Okamoto, Y, Ikai, T. (2008) Chiral HPLC for efficient resolution of enantiomers. Chemical Society Reviews, 37, 2593-2608. [Pg.166]

An example of a chiral compound is lactic acid. Two different forms of lactic acid that are mirror images of each other can be defined (Figure 2-69). These two different molecules are called enantiomers. They can be separated, isolated, and characterized experimentally. They are different chemical entities, and some of their properties arc different (c.g., their optical rotation),... [Pg.77]

In chemoinformatics, chirality is taken into account by many structural representation schemes, in order that a specific enantiomer can be imambiguously specified. A challenging task is the automatic detection of chirality in a molecular structure, which was solved for the case of chiral atoms, but not for chirality arising from other stereogenic units. Beyond labeling, quantitative descriptors of molecular chirahty are required for the prediction of chiral properties such as biological activity or enantioselectivity in chemical reactions) from the molecular structure. These descriptors, and how chemoinformatics can be used to automatically detect, specify, and represent molecular chirality, are described in more detail in Chapter 8. [Pg.78]

Strategy Problem 7 Synthesis of a single enantiomer. Many compounds such as pharmaceuticals, flavourings, and insect control chemicals must not only have the right relative stereochemistry but must be optically active too if tliey are to be of any use. Consider the strategy of synthesising one enantiomer ... [Pg.134]

Optically inactive starting materials can give optically active products only if they are treated with an optically active reagent or if the reaction is catalyzed by an optically active substance The best examples are found m biochemical processes Most bio chemical reactions are catalyzed by enzymes Enzymes are chiral and enantiomerically homogeneous they provide an asymmetric environment m which chemical reaction can take place Ordinarily enzyme catalyzed reactions occur with such a high level of stereo selectivity that one enantiomer of a substance is formed exclusively even when the sub strate is achiral The enzyme fumarase for example catalyzes hydration of the double bond of fumaric acid to malic acid m apples and other fruits Only the S enantiomer of malic acid is formed m this reaction... [Pg.299]

Adopting the enantiomers of glyceraldehyde as stereo chemical reference com pounds originated with proposals made in 1906 by M A Rosanoff a chemist at New York University... [Pg.1028]

Stereochemistry (Chapter 7) Chemistry in three dimensions the relationship of physical and chemical properties to the spatial arrangement of the atoms in a molecule Stereoelectron ic effect (Section 5 16) An electronic effect that depends on the spatial arrangement between the or bitals of the electron donor and acceptor Stereoisomers (Section 3 11) Isomers with the same constitu tion but that differ in respect to the arrangement of their atoms in space Stereoisomers may be either enantiomers or diastereomers... [Pg.1294]

Enantiomers. Two nonsuperimposable structures that are mirror images of each other are known as enantiomers. Enantiomers are related to each other in the same way that a right hand is related to a left hand. Except for the direction in which they rotate the plane of polarized light, enantiomers are identical in all physical properties. Enantiomers have identical chemical properties except in their reactivity toward optically active reagents. [Pg.46]

Multiple Chiral Centers. The number of stereoisomers increases rapidly with an increase in the number of chiral centers in a molecule. A molecule possessing two chiral atoms should have four optical isomers, that is, four structures consisting of two pairs of enantiomers. However, if a compound has two chiral centers but both centers have the same four substituents attached, the total number of isomers is three rather than four. One isomer of such a compound is not chiral because it is identical with its mirror image it has an internal mirror plane. This is an example of a diaster-eomer. The achiral structure is denoted as a meso compound. Diastereomers have different physical and chemical properties from the optically active enantiomers. Recognition of a plane of symmetry is usually the easiest way to detect a meso compound. The stereoisomers of tartaric acid are examples of compounds with multiple chiral centers (see Fig. 1.14), and one of its isomers is a meso compound. [Pg.47]

A few GLC stationary phases rely on chemical selectivity. The most notable are stationary phases containing chiral functional groups, which can be used for separating enantiomers. ... [Pg.567]

There are interesting examples of enantiomers that not only are found separately but also have different chemical properties when reacting with some reagent which is itself an enantiomer. For example (+ )-glucose is metabolized by animals and can be fermented by yeasts, but (—)-glucose has neither of these properties. The enantiomer ( + )-carvone smells of caraway whereas (—)-carvone smells of spearmint. [Pg.79]

Traditionally, chiral separations have been considered among the most difficult of all separations. Conventional separation techniques, such as distillation, Hquid—Hquid extraction, or even some forms of chromatography, are usually based on differences in analyte solubiUties or vapor pressures. However, in an achiral environment, enantiomers or optical isomers have identical physical and chemical properties. The general approach, then, is to create a "chiral environment" to achieve the desired chiral separation and requires chiral analyte—chiral selector interactions with more specificity than is obtainable with conventional techniques. [Pg.60]

Chemical Properties. Because of its chiral center, malic acid is optically active. In 1896, when tartaric acid was first reduced to malic acid, the levorotatory enantiomer, S(—), was confirmed as having the spatial configuration (1) (5,6). The other enantiomer (2) has the R configuration. A detailed discussion of configuration assignment by the sequence rule or the R and S system is available (7). [Pg.521]

Chemical Properties. The notation used by Chemical Abstracts to reflect the configuration of tartaric acid is as follows (R-R, R )-tartaric acid [S7-69A-] (4) (S-R, R )-tartaric acid [147-71-7] (5) and y j O-tartaric acid [147-73-9] (6). Racemic acid is an equimolar mixture of the two optically active enantiomers and, hence, like the meso acid, is optically inactive. [Pg.525]

Enzymatic hydrolysis is also used for the preparation of L-amino acids. Racemic D- and L-amino acids and their acyl-derivatives obtained chemically can be resolved enzymatically to yield their natural L-forms. Aminoacylases such as that from Pispergillus OTj e specifically hydrolyze L-enantiomers of acyl-DL-amino acids. The resulting L-amino acid can be separated readily from the unchanged acyl-D form which is racemized and subjected to further hydrolysis. Several L-amino acids, eg, methionine [63-68-3], phenylalanine [63-91-2], tryptophan [73-22-3], and valine [72-18-4] have been manufactured by this process in Japan and production costs have been reduced by 40% through the appHcation of immobilized cell technology (75). Cyclohexane chloride, which is a by-product in nylon manufacture, is chemically converted to DL-amino-S-caprolactam [105-60-2] (23) which is resolved and/or racemized to (24)... [Pg.311]

Care should be exercised when attempting to interpret in vivo pharmacological data in terms of specific chemical—biological interactions for a series of asymmetric compounds, particularly when this interaction is the only parameter considered in the analysis (10). It is important to recognize that the observed difference in activity between optical antipodes is not simply a result of the association of the compound with an enzyme or receptor target. Enantiomers differ in absorption rates across membranes, especially where active transport mechanisms are involved (11). They bind with different affinities to plasma proteins (12) and undergo alternative metaboHc and detoxification processes (13). This ultimately leads to one enantiomer being more available to produce a therapeutic effect. [Pg.237]

Much effort has been placed in the synthesis of compounds possessing a chiral center at the phosphoms atom, particularly three- and four-coordinate compounds such as tertiary phosphines, phosphine oxides, phosphonates, phosphinates, and phosphate esters (11). Some enantiomers are known to exhibit a variety of biological activities and are therefore of interest Oas agricultural chemicals, pharmaceuticals (qv), etc. Homochiral bisphosphines are commonly used in catalytic asymmetric syntheses providing good enantioselectivities (see also Nucleic acids). Excellent reviews of low coordinate (coordination numbers 1 and 2) phosphoms compounds are available (12). [Pg.359]

This chemical bond between the metal and the hydroxyl group of ahyl alcohol has an important effect on stereoselectivity. Asymmetric epoxidation is weU-known. The most stereoselective catalyst is Ti(OR) which is one of the early transition metal compounds and has no 0x0 group (28). Epoxidation of isopropylvinylcarbinol [4798-45-2] (1-isopropylaHyl alcohol) using a combined chiral catalyst of Ti(OR)4 and L-(+)-diethyl tartrate and (CH2)3COOH as the oxidant, stops at 50% conversion, and the erythro threo ratio of the product is 97 3. The reason for the reaction stopping at 50% conversion is that only one enantiomer can react and the unreacted enantiomer is recovered in optically pure form (28). [Pg.74]

J. Jaques, A. CoUet, and S. WiUen, Enantiomers, Racemate, and Resolutions,]o m Wiley Sons, Inc., New York, 1981 The Chemical Society of Japan, eds., Kikan Kagaku Sosetsu (No. 6, Resolution of Optical Isomers), Gakkai Shuppan Senta, Tokyo, Japan, 1989 G. C. Barrett ia Ref. 1, Chapt. 10, pp. 338—353 S. Otsuka and T. Mukaiyama, Progress of ylsymmetric Synthesis and Optical Resolution (ia Japanese), Kagaku Dojia, Kyoto, Japan, 1982. [Pg.298]

Separation of enantiomers by physical or chemical methods requires the use of a chiral material, reagent, or catalyst. Both natural materials, such as polysaccharides and proteins, and solids that have been synthetically modified to incorporate chiral structures have been developed for use in separation of enantiomers by HPLC. The use of a chiral stationary phase makes the interactions between the two enantiomers with the adsorbent nonidentical and thus establishes a different rate of elution through the column. The interactions typically include hydrogen bonding, dipolar interactions, and n-n interactions. These attractive interactions may be disturbed by steric repulsions, and frequently the basis of enantioselectivity is a better steric fit for one of the two enantiomers. ... [Pg.89]


See other pages where Enantiomer chemical is mentioned: [Pg.14]    [Pg.14]    [Pg.14]    [Pg.14]    [Pg.63]    [Pg.147]    [Pg.159]    [Pg.161]    [Pg.7]    [Pg.14]    [Pg.14]    [Pg.14]    [Pg.14]    [Pg.63]    [Pg.147]    [Pg.159]    [Pg.161]    [Pg.7]    [Pg.132]    [Pg.1714]    [Pg.2144]    [Pg.77]    [Pg.296]    [Pg.296]    [Pg.311]    [Pg.311]    [Pg.177]    [Pg.75]    [Pg.237]    [Pg.272]    [Pg.96]    [Pg.337]    [Pg.56]    [Pg.82]    [Pg.88]   
See also in sourсe #XX -- [ Pg.133 ]




SEARCH



Chemical Properties of Enantiomers

Chiral catalysts single-enantiomer fine chemicals

Enantiomers chemical differences

Enantiomers chemical resolution

Enantiomers chemical separation

Enantiomers) chemical properties

Properties of Enantiomers Chemical Differences

Single-enantiomer fine chemicals

Stereochemistry chemical differences between enantiomers

© 2024 chempedia.info