Enantiomers, pure

Optically Inactive Chiral Compounds. Although chirality is a necessary prerequisite for optical activity, chiral compounds are not necessarily optically active. With an equal mixture of two enantiomers, no net optical rotation is observed. Such a mixture of enantiomers is said to be racemic and is designated as ( ) and not as dl. Racemic mixtures usually have melting points higher than the melting point of either pure enantiomer. 

Chiral separations present special problems for vaUdation. Typically, in the absence of spectroscopic confirmation (eg, mass spectral or infrared data), conventional separations are vaUdated by analysing "pure" samples under identical chromatographic conditions. Often, two or more chromatographic stationary phases, which are known to interact with the analyte through different retention mechanisms, are used. If the pure sample and the unknown have identical retention times under each set of conditions, the identity of the unknown is assumed to be the same as the pure sample. However, often the chiral separation that is obtained with one type of column may not be achievable with any other type of chiral stationary phase. In addition, "pure" enantiomers are generally not available. 

Because the starting materials were optically active, the products were all pure enantiomers. Later, the synthetic scheme shown in Figure 5 was developed (22,45). Resolution of the racemic mixture was accompHshed at the penultimate stage and the optically active D-threo-amine (7) was converted to florfenicol (2). This synthetic process also resulted in the synthesis of thiamphenicol shown in Figure 6 using 1,1,2,3,3,3-hexafluoropropyl diethylamine (FPA) (46). More recently an improved method of synthesis of florfenicol has been developed (17). 

Optically Active Acids and Esters. Enantioselective hydrolysis of esters of simple alcohols is a common method for the production of pure enantiomers of esters or the corresponding acids. Several representative examples are summarized ia Table 4. Lipases, esterases, and proteases accept a wide variety of esters and convert them to the corresponding acids, often ia a highly enantioselective manner. For example, the hydrolysis of (R)-methyl hydratropate [34083-55-1] (40) catalyzed by Hpase P from Amano results ia the corresponding acid ia 50% yield and 95% ee (56). Various substituents on the a-carbon (41—44) are readily tolerated by both Upases and proteases without reduction ia selectivity (57—60). The enantioselectivity of many Upases is not significantly affected by changes ia the alcohol component. As a result, activated esters may be used as a means of enhancing the reaction rate. 

The presence of asymmetric C atoms in a molecule may, of course, be indicated by diastereotopic shifts and absolute configurations may, as already shown, be determined empirically by comparison of diastereotopic shifts However, enantiomers are not differentiated in the NMR spectrum. The spectrum gives no indication as to whether a chiral compound exists in a racemic form or as a pure enantiomer. 

It is possible to obtain pure enantiomers of chiral compounds. One property of separated enantiomers is to cause the rotation of the plane of polarized light by opposite... 

Since the first separation of enantiomers by SMB chromatography, described in 1992 [95], the technique has been shown to be a perfect alternative for preparative chiral resolutions [10, 21, 96, 97]. Although the initial investment in the instrumentation is quite high - and often prohibitive for small companies - the savings in solvent consumption and human power, as well as the increase in productivity, result in reduced production costs [21, 94, 98]. Therefore, the technique would be specially suitable when large-scale productions (>100 g) of pure enantiomers are needed. Despite the fact that SMB can produce enantiomers at very high enantiomeric excesses, it is sometimes convenient to couple it with another separation... 

Enantiomeric separations have become increasingly important, especially in the pharmaceutical and agricultural industries as optical isomers often possess different biological properties. The analysis and preparation of a pure enantiomer usually involves its resolution from the antipode. Among all the chiral separation techniques, HPLC has proven to be the most convenient, reproducible and widely applicable method. Most of the HPLC methods employ a chiral selector as the chiral stationary phase (CSP). 

For preparative or semipreparative-scale enantiomer separations, the enantiose-lectivity and column saturation capacity are the critical factors determining the throughput of pure enantiomer that can be achieved. The above-described MICSPs are stable, they can be reproducibly synthesized, and they exhibit high selectivities - all of which are attractive features for such applications. However, most MICSPs have only moderate saturation capacities, and isocratic elution leads to excessive peak tailing which precludes many preparative applications. Nevertheless, with the L-PA MICSP described above, mobile phases can be chosen leading to acceptable resolution, saturation capacities and relatively short elution times also in the isocratic mode (Fig. 6-6). 

The concept of using continuous chromatography for the separation of stereoisomers or optical isomers is very old and was probably proposed for the first time by Martin and Kuhn in 1941 [28]. The suggested implementation was different from today s SMB technology, though the basic concept is the same. The chromatographic media is moved continuously in a conveyor belt, the feed is injected continuously at a fixed point, and the pure enantiomers are recovered at fixed points. In the idea of Martin and Kuhn, benefits were taken from the possibility of modulating the adsorption of the products at different temperatures. 

Two methods are used in practice to obtain enantiomerically pure amino acids. One way is to resolve the racemic mixture into its pure enantiomers (Section 9.8). A more direct approach, however, is to use an enantioselective synthesis to prepare only the desired 5 enantiomer directly. As discussed in the Chapter 19 Focus Oil, the idea behind enantioselective synthesis is to find a chiral reaction catalyst that will temporarily hold a substrate molecule in an unsymmetrical environment. While in that chiral environment, the substrate may be more... 

Resolution (Section 9.8) The process by which a racemic mixture is separated into its tw o pure enantiomers. 

The addition of an achiral organometallic reagent (R M) to a chiral carbonyl compound 1 (see Section 1.3.1.1.) leads to a mixture of diastercomers 2 (syn/anti) which can be either racemic, or enantiomerically enriched or pure, depending on whether the substrates are race-mates or pure enantiomers. This section incorporates only those reactions starting from optically pure a-amino aldehydes, however, optical purity of the starting material has not been demonstrated in all cases. 

Calculated on chromatographic separation, affording the pure enantiomers in 49% and 37% yield, respectively. 

It is well known that spontaneous resolution of a racemate may occur upon crystallization if a chiral molecule crystallizes as a conglomerate. With regard to sulphoxides, this phenomenon was observed for the first time in the case of methyl p-tolyl sulphoxide269. The optical rotation of a partially resolved sulphoxide (via /J-cyclodextrin inclusion complexes) was found to increase from [a]589 = + 11.5° (e.e. 8.1%) to [a]589 = +100.8 (e.e. 71.5%) after four fractional crystallizations from light petroleum ether. Later on, few optically active ketosulphoxides of low optical purity were converted into the pure enantiomers by fractional crystallization from ethyl ether-hexane270. This resolution by crystallization was also successful for racemic benzyl p-tolyl sulphoxide and t-butyl phenyl sulphoxide271. 

However, considering practical limitations, that is, the availability of optically pure enantiomers, E values are more commonly determined on racemates by evaluating the enantiomeric excess values as a function of the extent of conversion in batch reactions. For irreversible reactions, the E value can be calculated from Equation 1 (when the enantiomeric excess ofthe product is known) or from Equation 2 (when the enantiomeric excess ofthe substrate is knovm) [la]. For reversible reactions, which may be the case in enzymatic resolution carried out in organic solvents (especially at extents of conversion higher than 40%), Equations 3 or 4, in which the reaction equilibrium constant has been introduced, should be used [lb]. 

Deracemization. In this type of process, one enantiomer is converted to the other, so that a racemic mixture is converted to a pure enantiomer, or to a mixture enriched in one enantiomer. This is not quite the same as the methods of resolution previously mentioned, though an outside optically active substance is required. 

---