Electromagnetic spectroscopy

Fluorescence spectrofluorimetry is a type of electromagnetic spectroscopy that generates absorbance and emission fluorescent spectra, giving insights into biomolecular structure. 

Electromagnetic spectroscopy involves the interaction of electromagnetic waves and matter. We can use all regions of the electromagnetic spectrum and each will give specific information about a material. Table 10.4 provides a summary and succeeding sections deal with each of the methods in a little more detail with specihc application to ceramics. Once again, to really understand each of the methods you need to read a specialist text. 

Both infrared and Raman spectroscopy provide infonnation on the vibrational motion of molecules. The teclmiques employed differ, but the underlying molecular motion is the same. A qualitative description of IR and Raman spectroscopies is first presented. Then a slightly more rigorous development will be described. For both IR and Raman spectroscopy, the fiindamental interaction is between a dipole moment and an electromagnetic field. Ultimately, the two... 

Raman scattering has been discussed by many authors. As in the case of IR vibrational spectroscopy, the interaction is between the electromagnetic field and a dipole moment, however in this case the dipole moment is induced by the field itself The induced dipole is pj j = a E, where a is the polarizability. It can be expressed in a Taylor series expansion in coordinate isplacement... 

Spectroscopy, or the study of the interaction of light with matter, has become one of the major tools of the natural and physical sciences during this century. As the wavelength of the radiation is varied across the electromagnetic spectrum, characteristic properties of atoms, molecules, liquids and solids are probed. In the... 

Microwave spectroscopy began in 1934 with the observation of the -20 GHz absorption spectrum of ammonia by Cleeton and Williams. Here we will consider the microwave region of the electromagnetic... 

As discussed in more detail elsewhere in this encyclopaedia, many optical spectroscopic methods have been developed over the last century for the characterization of bulk materials. In general, optical spectroscopies make use of the interaction of electromagnetic radiation with matter to extract molecular parameters from the substances being studied. The methods employed usually rely on the examination of the radiation absorbed. 

A number of surface-sensitive spectroscopies rely only in part on photons. On the one hand, there are teclmiques where the sample is excited by electromagnetic radiation but where other particles ejected from the sample are used for the characterization of the surface (photons in electrons, ions or neutral atoms or moieties out). These include photoelectron spectroscopies (both x-ray- and UV-based) [89, 9Q and 91], photon stimulated desorption [92], and others. At the other end, a number of methods are based on a particles-in/photons-out set-up. These include inverse photoemission and ion- and electron-stimulated fluorescence [93, M]- All tirese teclmiques are discussed elsewhere in tliis encyclopaedia. 

Not only can electronic wavefiinctions tell us about the average values of all the physical properties for any particular state (i.e. above), but they also allow us to tell us how a specific perturbation (e.g. an electric field in the Stark effect, a magnetic field in the Zeeman effect and light s electromagnetic fields in spectroscopy) can alter the specific state of interest. For example, the perturbation arising from the electric field of a photon interacting with the electrons in a molecule is given within die so-called electric dipole approximation [12] by ... 

As diverse as these techniques are all of them are based on the absorption of energy by a molecule and all measure how a molecule responds to that absorption In describing these techniques our emphasis will be on then application to structure determination We 11 start with a brief discussion of electromagnetic radiation which is the source of the energy that a molecule absorbs m NMR IR and UV VIS spectroscopy... 

Section 13 20 IR spectroscopy probes molecular structure by examining transitions between vibrational energy levels using electromagnetic radiation m the 625-4000 cm range The presence or absence of a peak at a charac tenstic frequency tells us whether a certain functional group is present Table 13 4 lists IR absorption frequencies for common structural units... 

Colorimetry, in which a sample absorbs visible light, is one example of a spectroscopic method of analysis. At the end of the nineteenth century, spectroscopy was limited to the absorption, emission, and scattering of visible, ultraviolet, and infrared electromagnetic radiation. During the twentieth century, spectroscopy has been extended to include other forms of electromagnetic radiation (photon spectroscopy), such as X-rays, microwaves, and radio waves, as well as energetic particles (particle spectroscopy), such as electrons and ions. ... 

The focus of this chapter is photon spectroscopy, using ultraviolet, visible, and infrared radiation. Because these techniques use a common set of optical devices for dispersing and focusing the radiation, they often are identified as optical spectroscopies. For convenience we will usually use the simpler term spectroscopy in place of photon spectroscopy or optical spectroscopy however, it should be understood that we are considering only a limited part of a much broader area of analytical methods. Before we examine specific spectroscopic methods, however, we first review the properties of electromagnetic radiation. 

In the previous section we defined several characteristic properties of electromagnetic radiation, including its energy, velocity, amplitude, frequency, phase angle, polarization, and direction of propagation. Spectroscopy is possible only if the photon s interaction with the sample leads to a change in one or more of these characteristic properties. 

In the second broad class of spectroscopy, the electromagnetic radiation undergoes a change in amplitude, phase angle, polarization, or direction of propagation as a result of its refraction, reflection, scattering, diffraction, or dispersion by the sample. Several representative spectroscopic techniques are listed in Table 10.2. 

The first detector for optical spectroscopy was the human eye, which, of course, is limited both by its accuracy and its limited sensitivity to electromagnetic radiation. Modern detectors use a sensitive transducer to convert a signal consisting of photons into an easily measured electrical signal. Ideally the detector s signal, S, should be a linear function of the electromagnetic radiation s power, P,... 

In absorption spectroscopy a beam of electromagnetic radiation passes through a sample. Much of the radiation is transmitted without a loss in intensity. At selected frequencies, however, the radiation s intensity is attenuated. This process of attenuation is called absorption. Two general requirements must be met if an analyte is to absorb electromagnetic radiation. The first requirement is that there must be a mechanism by which the radiation s electric field or magnetic field interacts with the analyte. For ultraviolet and visible radiation, this interaction involves the electronic energy of valence electrons. A chemical bond s vibrational energy is altered by the absorbance of infrared radiation. A more detailed treatment of this interaction, and its importance in deter-... 

Spectroscopy is basically an experimental subject and is concerned with the absorption, emission or scattering of electromagnetic radiation by atoms or molecules. As we shall see in Chapter 3, electromagnetic radiation covers a wide wavelength range, from radio waves to y-rays, and the atoms or molecules may be in the gas, liquid or solid phase or, of great importance in surface chemistry, adsorbed on a solid surface. 

---