2-Dimethylaminopyridine, reaction

Dimethylaminopyridine [1122-58-3] (DMAP) (24) has emerged as the preferred catalyst for a variety of synthetic transformations under mild conditions, particularly acylations, alkylations, silylations, esterifications, polymeri2ations, and rearrangements (100). POLYDMAP resin [1122-58-3], a polymeric version of DMAP, is available, and is as effective as DMAP as a catalyst for acylation reactions. Furthermore, it can be recycled without regeneration more than 20 times with very Htde loss in activity. POLYDMAP is a trademark of Reilly Industries, Inc. 

However, this method is appHed only when esterification cannot be effected by the usual acid—alcohol reaction because of the higher cost of the anhydrides. The production of cellulose acetate (see Fibers, cellulose esters), phenyl acetate (used in acetaminophen production), and aspirin (acetylsahcyhc acid) (see Salicylic acid) are examples of the large-scale use of acetic anhydride. The speed of acylation is greatiy increased by the use of catalysts (68) such as sulfuric acid, perchloric acid, trifluoroacetic acid, phosphoms pentoxide, 2inc chloride, ferric chloride, sodium acetate, and tertiary amines, eg, 4-dimethylaminopyridine. 

Pyrrole and alkylpyrroles can be acylated by heating with acid anhydrides at temperatures above 100 °C. Pyrrole itself gives a mixture of 2-acetyl- and 2,5-diacetyl-pyrrole on heating with acetic anhydride at 150-200 °C. iV-Acylpyrroles are obtained by reaction of the alkali-metal salts of pyrrole with an acyl halide. AC-Acetylimidazole efficiently acetylates pyrrole on nitrogen (65CI(L)1426). Pyrrole-2-carbaldehyde is acetylated on nitrogen in 80% yield by reaction with acetic anhydride in methylene chloride and in the presence of triethylamine and 4-dimethylaminopyridine (80CB2036). 

Oxiranes exhibit 1,3 [e,n] capacity. Therefore, seven-membered ring systems can be synthesized on reaction with hetero-1,3-dienes. The reaction is catalyzed by 4-dimethylaminopyridine. On catalysis with boron trifluonde, the regioche-mistry is reversed [263] (equation 58). 

By application of the Corey-Winter reaction,vicinal diols 1 can be converted into olefins 3. The key step is the cleavage of cyclic thionocarbonates 2 (1,3-dioxolanyl-2-thiones) upon treatment with trivalent phosphorus compounds. The required cyclic thionocarbonate 2 can be prepared from a 1,2-diol 1 and thio-phosgene 4 in the presence of 4-dimethylaminopyridine (DMtVP) ... 

Reaction of N,N-dimethylaniline with 1-cyanobenziodoxol 1783 to afford N-methyl-N-cyanomethylaniline 1784 in 97% yield has been discussed in Section 12.1 [31]. Analogously, oxidation of dimethylaniline with iodosobenzene and trimethylsilyl azide 19 at 0°C in CDCI3 gives the azido compound 2040 in 95% yield, iodobenzene, and HMDSO 7 [194, 195] (Scheme 12.56). Likewise, the nucleophilic catalyst 4-dimethylaminopyridine (DMAP) is oxidized, in 95% yield, to the azide 2041, which is too sensitive toward hydrolysis to 4-N-methylaminopyri-dine to enable isolation [194, 195]. Amides such as 2042, in combination with tri-... 

The second step, nucleophilic attack of an alcohol or phenol on the activated carboxylic acid RCOIm (carboxylic acid imidazolide), is usually slow (several hours), but it can be accelerated by heating[7] or by adding a base[8] [9] such as NaH, NaNH2, imidazole sodium (ImNa), NaOR, triethylamine, diazabicyclononene (DBN), diazabicycloimdecene (DBU), or /7-dimethylaminopyridine to the reaction mixture (see Tables 3—1 and 3—2). This causes the alcohol to become more nucleophilic. Sodium alcoholate applied in catalytic amounts accelerates the ester synthesis to such an extent that even at room temperature esterification is complete after a short time, usually within a few minutes.[7H9] This catalysis is a result of the fact that alcoholate reacts with the imidazolide very rapidly, forming the ester and imidazole sodium. 

Tetrazolides can also be formed from phosphoramidites (phosphorous amides) by reaction of tetrazoles in the presence of p-dimethylaminopyridine [ 105]... 

Nitromethylation of aldehydes has been carried out in a one pot procedure consisting of the Henry reaction, acetylation, and reduction with sodium borohydride, which provides a good method for the preparation of l-nitroalkanes.16b 79 It has been improved by several modifications. The initial condensation reaction is accelerated by use of KF and 18-crown-6 in isopropanol. Acetylation is effected with acetic anhydride at 25 °C and 4-dimethylaminopyridine (DMAP) as a catalyst. These mild conditions are compatible with various functional groups which are often... 

For example, the reaction of nitroalkanes with di-tert-butyl dicarbonate, (B0C)20, and 4-dimethylaminopyridine (DMAP) as catalysts in the presence of dipolarophiles at room temperature affords cycloadducts in improved yields compared with the Mukaiyama-Hosino method.58 The conversion of Eq. 6.32 gives a 90% yield by this procedure, whereas the conventional method using PhNCO gives a 79% yield of the same product. An additional advantage of this new method is that the use of (B0C)20 allows the reaction to be carried out with substrates that contain NH or OH groups without prior protection. The cycloaddition leads directly to protected N- or (9-Boc products (see Eq. 6.33). 

Dissolve the amine-containing PAM AM dendrimer in methanol or a buffered aqueous medium at a pH of 7-9 (e.g., 50mM sodium phosphate, pH 7.5) and at a concentration of at least lOmg/ml. Note that Singh (1998) used a concentration of llOmg/ml in methanol, but other dendrimer concentrations should work equally well. For nonaqueous reactions, the addition of a proton acceptor may aid in driving the reaction to maximal yields (i.e., triethylamine or dimethylaminopyridine). 

One obvious synthetic route to isoxazoles and dihydroisoxazoles is by [3+2] cycloadditions of nitrile oxides with alkynes and alkenes, respectively. In the example elaborated by Giacomelli and coworkers shown in Scheme 6.206, nitroalkanes were converted in situ to nitrile oxides with 1.25 equivalents of the reagent 4-(4,6-di-methoxy[l,3,5]triazin-2-yl)-4-methylmorpholinium chloride (DMTMM) and 10 mol% of N,N-dimethylaminopyridine (DMAP) as catalyst [373], In the presence of an alkene or alkyne dipolarophile (5.0 equivalents), the generated nitrile oxide 1,3-dipoles undergo cycloaddition with the double or triple bond, respectively, thereby furnishing 4,5-dihydroisoxazoles or isoxazoles. For these reactions, open-vessel microwave conditions were chosen and full conversion with very high isolated yields of products was achieved within 3 min at 80 °C. The reactions could also be carried out utilizing a resin-bound alkyne [373]. For a related example, see [477]. 

From Srivatsava et al (248). Reaction conditions catalyst (TS-1 Si/Ti = 36, Ti-MCM-41 Si/Ti = 46), 100 mg co-catalyst, 0.0072 mmol epoxide, 18 mmol CH2CI2, 20 mL CO2, 6.9 bar. DMAP N,N-dimethylaminopyridine EC epichlorohydrin PO propylene oxide SO stytene oxide BO a-butylene oxide TOF turnover frequency (moles epoxide converted per mole of Ti per hour. 

In a NMR tube, to a solution of the epoxy alcohol (2.5 mg) in CDCI3 (0.5 mL) was added 4-dimethylaminopyridine (5 mg) and (R)-(+)-a-methoxy-a-(trifluor-omethyl)phenylacetyl chloride (5 mg). The mixture was allowed to stand overnight at room temperature. The reaction was monitored by TLC to ensure complete consumption of the starting material. H and 19F NMR spectra were carried out on the crude reaction mixture. In the 19F NMR spectrum, each enantiomer gave a signal an additional signal at —71.8 ppm was ascribed to residual MTPA. (19F NMR (250 MHz, CDCI3) 8 - 70.7 (s, (2R,3R)-enantio-mer) —72.0 (s, (25 ,3.S)-enantiomer)). 

SS Wang, JP Tam, BSH Wang, RB Merrifield. Enhancement of peptide coupling reactions by 4-dimethylaminopyridine. Int J Pept Prot Res 18, 459, 1981. 

During the first decade when solid-phase synthesis was executed using Fmoc/tBu chemistry, the first Fmoc-amino acid was anchored to the support by reaction of the symmetrical anhydride with the hydroxymethylphenyl group of the linker or support. Because this is an esterification reaction that does not occur readily, 4-dimethylaminopyridine was employed as catalyst. The basic catalyst caused up to 6% enantiomerization of the activated residue (see Section 4.19). Diminution of the amount of catalyst to one-tenth of an equivalent (Figure 5.21, A) reduced the isomerization substantially but did not suppress it completely. As a consequence, the products synthesized during that decade were usually contaminated with a small amount of the epimer. In addition, the basic catalyst was responsible for a second side reaction namely, the premature removal of Fmoc protector, which led to loading of some dimer of the first residue. Nothing could be done about the situation,... 

The alternative method for making activated esters is base-catalyzed transesterification. Fmoc-amino acids are esterified in excellent yields by reaction with pentafluorophenyl trifluoroacetate at 40°C in the presence of pyridine (Figure 7.13). A mixed anhydride is formed initially, and the anhydride is then attacked by the pentafluorophenoxy anion that is generated by the pyridine. Succinimido, chlorophe-nyl, and nitrophenyl esters were made by this method when it was introduced decades ago. A unique variant of this approach is the use of mixed carbonates that contain an isopropenyl group [Cf C CfyO-COjR]. These react with hydroxy compounds in the presence of triethylamine or 4-dimethylaminopyridine (see Section 4.19) to give the esters and acetone.30 35... 

It seems reasonable that polyester cyclics could be prepared by an extension of the /wendo-high-dilution [17] chemistry used for the preparation of cyclic carbonate oligomers [18, 19] however, such proved not to be the case. Brunelle et al. showed that the reaction of terephthaloyl chloride (TPC) with diols such as 1,4-butanediol did not occur quickly enough to prevent concentration of acid chlorides from building up during condensation [14]. Even slow addition of equimolar amounts of TPC and butanediol to an amine base (triethylamine, pyridine or dimethylaminopyridine) under anhydrous conditions did not form cyclic oligomers. (The products were identified by comparison to authentic materials isolated from commercial PBT by the method of Wick and Zeitler [9].)... 

---