Dimethyl carbonate reaction conditions

Inert solvents such as dimethyl ether [22], liquid sulfur dioxide or petroleum ether [23] were used to improve the quality of the sulfated alcohol or the reaction conditions. Solvents immiscible in water, such as petroleum ether [24], carbon tetrachloride [25], or butyl alcohol [26], as well as water-soluble sol-... 

Organic hydroperoxides have also been used for the oxidation of sulphoxides to sulphones. The reaction in neutral solution occurs at a reasonable rate in the presence of transition metal ion catalysts such as vanadium, molybdenum and titanium - , but does not occur in aqueous media . The usual reaction conditions involve dissolution of the sulphoxide in alcohols, ethers or benzene followed by dropwise addition of the hydroperoxide at temperatures of 50-80 °C. By this method dimethyl sulphoxide and methyl phenyl sulphoxide have been oxidized to the corresponding sulphone in greater than 90% yields . A similar method for the oxidation of sulphoxides has been patented . Unsaturated sulphoxides are oxidized to the sulphone without affecting the carbon-carbon double bonds. A further patent has also been obtained for the reaction of dimethyl sulphoxide with an organic hydroperoxide as shown in equation (19). 

The interactions of dimethyl- and diethylzinc with bulky tris(hydroxyphenyl)methanes, Scheme 86, yielded, depending on the reaction conditions, a variety of alkylzinc alkoxides, featuring two-, three-, and four-coordinate zinc centers. These polynuclear compounds (Figure 63 shows the trinuclear ethylzinc derivative 136) are relatively poor catalysts for the co-polymerization of cyclohexene oxide and carbon dioxide.197... 

The products of electrochemical oxidation of conjugated dienes are considerably affected by the reaction conditions such as the material of the electrode, the supporting electrolyte and the solvent. The oxidation of butadiene with a graphite or carbon-cloth anode in 0.5 M methanolic solution of NaClCU mainly yields dimerized products along with small amounts of monomeric and trimeric compounds (equation 5)1. The use of platinum or glassy carbon mainly gives monomeric products. Other dienes such as isoprene, 1,3-cyclohexadiene, 2,4-hexadiene, 1,3-pentadiene and 2,3-dimethyl-l,3-butadiene yield complex mixtures of isomers of monomeric, dimeric and trimeric compounds, in which the dimeric products are the main products. 

In contrast with the reactions involving sulphide or hydrogen sulphide anions, aryl alkyl thioethers and unsymmetrical dialkyl thioethers (Table 4.3) are obtained conveniently by the analogous nucleophilic substitution reactions between haloalkanes and aryl or alkylthiols under mildly basic conditions in the presence of a quaternary ammonium salt [9-15] or polymer-supported quaternary ammonium salt [16]. Dimethyl carbonate is a very effective agent in the formation of methyl thioethers (4.1.4.B) [17]. 

The syntheses of 1 utilized the Ullmann ether synthesis. Reaction of 2 mol of 1-bromonaphthalene with 4,4-(hexafluoroisopropylidiene)diphenol afforded the desired product 1. The reaction was carried out in DM Ac at 160°C in the presence of potassium carbonate as the base and copper (I) iodine as the reaction catalyst to yield 1, as depicted in Scheme 1. The reaction proceeded slowly but in good yield with easy isolation of the desired compound. Acylation of 1 with 4-fluorobenzoyl chloride to prepare 2 was carried out under modified Friedel-Crafts reaction conditions using dimethyl-sulfone as catalyst moderator. Both 1 and 2 were easily recrystallized to yield high-purity monomers suitable for polymerizations. 

Because reductions by metals often occur as one-electron processes, radicals are involved as intermediates. When the reaction conditions are adjusted so that coupling competes favorably with other processes, the formation of a carbon-carbon bond can occur. The reductive coupling of acetone to form 2,3-dimethyl-2,3-butanediol (pinacol) is an example of such a process. 

The reaction of dimethyl carbonate with synthesis gas requires a cobalt-iodide catalyst and operating conditions of 180 C and 4000 psig. The acetaldehyde rate approaches 30 M/hr with selectivities greater than 85%. The productivities are much better than with methanol however, recycle of the CO and methanol back to dimethyl carbonate is very difficult ... 

As described in many reviews, Trost and his co-workers have carried out a pioneering work on the molybdenum-and tungsten-catalyzed allylic alkylation of allylic esters regioselectivity of the reaction is often complementary to the palladium-catalyzed allylic alkylation. The first asymmetric version was disclosed by Pfaltz and Lloyd-Jones in 1995 (Equation (63)). They used a catalytic amount of a novel tungsten complex, prepared from [W(CO)3(MeCN)3] or [W(cycloheptatriene) (COIs] and optically active (diphenylphosphino)phenyloxazolines 57, for the allylic alkylation of 3-aryl-2-propenyl phosphate with dimethyl sodiomalonate to isolate the corresponding branched alkylated compounds as a major isomer with an excellent enantioselectivity (96% ee). Unexpectedly, 3-aryl-2-propenyl carbonates are shown to be unreactive. It is worth noting that an isostructural molybdenum complex does not promote the catalytic alkylation under the same reaction conditions. In contrast, Lloyd-Jones and Lehmann reported the stereocontrolled... 

A very useful three-carbon olefin is acrolein dimethyl acetal (5). Acrolein itself cannot be used because it polymerizes and/or reacts with amines under the normal reaction conditions. With piperidine or morpholine as the base, acrolein acetals react in good yield with a wide variety of vinylic bromides to give dienal acetals and/or ami-noenal acetals. These product mixtures, after being treated with excess aqueous oxalic acid and being steam distilled, yield E,E-conjugated dienals, usually in good yields. Methacrolein acetals and 3-buten-2-one ethylene ketal also react well, but the crotonaldehyde acetals do not. 

Aresta and Quaranta studied the reactivity of alkylammonium N-alkylcarbamates (RNH3)02CNHR towards a different acylating substrate, such as dimethyl carbonate (DMC) [62a, b]. Carbamate salts (RNH3)02CNHR (R = benzyl, allyl, cyclohexyl), prepared in situ from aliphatic primary amines and C02, reacted with DMC to afford N-alkyl methylcarbamates (Equation 6.6). The reaction requires mild conditions (343-363 K 0.1 MPa C02 pressure) and can be carried out in DMC used as solvent and reagent. At 363 K, carbamate esters were obtained in satisfactory yield (45-92%) with high selectivity, as side products such as ureas, N,N-dialkylcarbamate esters, and alkylated amines were formed in very small amounts. 

Oxidative carbonylation of MeOH with PdCl2 affords dimethyl carbonate (233) and dimethyl oxalate (232) [137,138], Selectivity of the mono- and dicarbonylation depends on CO pressure and reaction conditions. 

S-i Fujita, Bhanage BM, Ikushima Y et al (2001) Synthesis of dimethyl carbonate from carbon dioxide and methanol in the presence of methyl iodide and base catalysts under mild conditions effect of reaction conditions and reaction mechanism. Green Chem 3(2) 87-91... 

Standard reaction conditions with carbon disulfide in pyridine converts 4-amitio-l,2-dimethylimidazole-5-carbonitrile to 7,8-dimethyl-2,6-disulfanylpurine (12). ... 

---