Dimerization reactions complexes

Soft carbon nucleophiles, such as activated methylene or methyne compounds 11, react with butadiene to give a mixture of the mono- (12) and di-(2,7-octadienyl) adducts (13) in the case of = H (activated methylenes), and to give the monoadduct 12 in the case of activated methynes, as expected (Scheme 3). The addition reactions with various carbon nucleophiles, such as j8-keto esters, /S-diketones, malonate and malononitrile, a-formyl ketones and esters, a-cyano ketones and esters, cyanoacetoacetamide, phenyl-sulfonyl acetate,nitroalkanes, and an enamine, are summarized in Table 1. PdCl2(PPh3)2-NaOPh is often used as a catalyst for the dimerization reaction. Complexes... 

The liquid-phase industrial process for the dimerization of propylene is called the dimersol process. In this process, a Zeigler-type catalyst is generated in situ by the treatment of a nickel salt with trialkyl aluminum. The different isomers of C. alkenes that are formed can be explained by referring to Figure 7.1. A nickel hydride complex 7.1 initiates the dimerization reaction. Complexes 1.1 and 73 are formed by the insertion of the first propylene into the Ni-H bond in anti-Markovnikov and Markovnikov maimer, respectively. 

An active catalytic species in the dimerization reaction is Pd(0) complex, which forms the bis-7r-allylpalladium complex 3, The formation of 1,3,7-octa-triene (7) is understood by the elimination of/5-hydrogen from the intermediate complex 1 to give 4 and its reductive elimination. In telomer formation, a nucleophile reacts with butadiene to form the dimeric telomers in which the nucleophile is introduced mainly at the terminal position to form the 1-substituted 2,7-octadiene 5. As a minor product, the isomeric 3-substituted 1,7-octadiene 6 is formed[13,14]. The dimerization carried out in MeOD produces l-methoxy-6-deuterio-2,7-octadiene (10) as a main product 15]. This result suggests that the telomers are formed by the 1,6- and 3,6-additions of MeO and D to the intermediate complexes I and 2. 

The intensely developing technique of high-resolution IR-spectroscopy of dimers composed of two different molecules in supersonic cooled jets offers a new promising approach to the quantum dynamics of reaction complexes. In essence, this is a unique possibility of modelling low-temperature chemical reactions. 

Mg(THF), when the stoichiometry was 1 2. Monomeric and dimeric amidinate complexes of magnesium have been studied in detail with respect to potential applications of these compounds in the chemical vapor deposition of magnesium-doped Group 13 compound semiconductor films. The reactions and products are summarized in Scheme 16. ... 

In 2003, Sigman et al. reported the use of a chiral carbene ligand in conjunction with the chiral base (-)-sparteine in the palladium(II) catalyzed oxidative kinetic resolution of secondary alcohols [26]. The dimeric palladium complexes 51a-b used in this reaction were obtained in two steps from N,N -diaryl chiral imidazolinium salts derived from (S, S) or (R,R) diphenylethane diamine (Scheme 28). The carbenes were generated by deprotonation of the salts with t-BuOK in THF and reacted in situ with dimeric palladium al-lyl chloride. The intermediate NHC - Pd(allyl)Cl complexes 52 are air-stable and were isolated in 92-95% yield after silica gel chromatography. Two diaster corners in a ratio of approximately 2 1 are present in solution (CDCI3). 

Scheme 62 Reaction scheme of dimer of dimer iron complexes as models...

Adventitious water is responsible for the formation of the dimeric hydroxo complex 31 obtained by reaction of AuCb with 1,4-dilithiotetraphenylbutadiene in ether solution [97[. The hydroxo-bridged complex [Au(C6H4N02-2)2( i-0H)[2 (32) was obtained either by reaction of Na[Au(C6H4N02-2)2(0Ph)2] with traces of water in CH2Cl2/n-hexane solution or by treatment of the dichloroaurated complex with NaOH [98[. The crystal structure of 32 2Et20 shows that it is a centrosymmetric... 

It was shown that complexes 19 of the zwitterionic precursors of ortho-quinone methides and a bis(sulfonium ylide) derived from 2,5-di hydroxyl 1,4 benzoquinone46 were even more stable than those with amine N-oxides. The bis(sulfonium ylide) complexes were formed in a strict 2 1 ratio (o-QM/ylide) and were unaltered at —78 °C for 10 h and stable at room temperature under inert conditions for as long as 15—30 min (Fig. 6.18).47 The o-QM precursor was produced from a-tocopherol (1), its truncated model compound (la), or a respective ortho-methylphenol in general by Ag20 oxidation in a solution containing 0.50-0.55 equivalents of bis(sulfonium ylide) at —78 °C. Although the species interacting with the ylide was actually the zwitterionic oxidation intermediate 3a and not the o-QM itself, the term stabilized o-QM was introduced for the complexes, since these reacted similar to the o-QMs themselves but in a well defined way without dimerization reactions. 

In all the latter cases the easier dimerization reaction is connected with the particular stability of the intermediate diradical species. This is also the reason for the recently found facile dimerization of the 1-donor substituted allylidene-cyclopropane 136a (Scheme 66) [127]. Allylidenecyclopropane 136a cyclodimer-izes to the expected cyclobutane 467 in very mild thermal conditions, due to the stabilization of the intermediate 466. At higher temperature (120 °C) both 136a and 467 give a more complex mixture of products, with the cyclooctadiene dimer 468 being the prevailing one (Scheme 66) [127],... 

The mercuration of phosphonium derivatives has also been observed. The methylene group of the dimeric palladium complex 63 substituted by a carbonyl and a phosphonium functionality is readily mercurated upon reaction with Hg(OAc)2 to afford complex 64 (Equation (22)).7 Further studies demonstrated that the presence of a triphenylphosphonium group alone is sufficient to promote proton-mercury exchange. For example, the reaction of... 

The fate of 10 depends on whether or not the zirconium dihydrido species, (T75-C5Me5)2ZrH2, is present. In the presence of the dihydride, further reduction occurs to yield the methoxide complex (7). In the absence of the dihydride, 10 undergoes a dimerization reaction, yielding 11 ... 

The following conclusions can be drawn (a) ir-Allylnickel compounds are probably not involved in the catalytic dimerization of cyclooctene, because the highest reaction rate occurs when only traces of these compounds can be detected further, the concentration of the new 7r-allyl-nickel compound (19) becomes significant only after the catalytic reaction has ceased, (b) The complex formed between the original 7r-allylnickel compound (11) and the Lewis acid is transformed immediately upon addition of cyclooctene to the catalytically active nickel complex or complexes. In contrast to 7r-allylnickel compounds, this species decomposes to give metallic nickel on treatment of the catalyst solution with ammonia, (c) The transformation of the catalytically active nickel complex to the more stable 7r-allylnickel complex occurs parallel with the catalytic dimerization reaction. This process is obviously of importance in stabilizing the catalyst system in the absence of reactive olefins. In... 

Although the above model was developed under non-catalytic conditions, some of the results may bear significance under natural conditions or in the presence of excess sulfite ions. Thus, the decomposition of the mono-sulfito complex was considered to be the rate-determining step in the catalytic cycle, but only estimates could be given for the rate constant in earlier studies. The comprehensive data treatment used by Lente and Fabian yielded a well established value for this parameter (106), which can then be used to improve previous kinetic models. Furthermore, the participation of reactions of the [Fe2(0H)(S03)]3+ complex was never considered in kinetic studies where excess sulfite ion was used over low iron(III) concentration in mildly acidic solution (pH 2.5-3.0). The above model predicts that in some cases the formation of the dimeric sulfito complex could make a substantial contribution to the spectral changes and omission of this species could lead to biased conclusions. Reevaluation of data sets reported earlier by including the reactions of [Fe2(0H)(S03)]3+ may resolve some of the controversies found in literature results. 

Rhodium(II) acetate complexes of formula [Rh2(OAc)4] have been used as hydrogenation catalysts [20, 21]. The reaction seems to proceed only at one of the rhodium atoms of the dimeric species [20]. Protonated solutions of the dimeric acetate complex in the presence of stabilizing ligands have been reported as effective catalysts for the reduction of alkenes and alkynes [21]. 

TPP)Rh(L)J+C1 in the presence of an alkyl halide leads to a given (P)Rh(R) or (P)Rh(RX) complex. The yield was nearly quantitative (>80X) in most cases based on the rhodium porphyrin starting species. However, it should be noted that excess alkyl halide was used in Equation 3 in order to suppress the competing dimerization reaction shown in Equation 1. The ultimate (P)Rh(R) products generated by electrosynthesis were also characterized by H l MR, which demonstrated the formation of only one porphyrin product(lA). No reaction is observed between (P)Rh and aryl halides but this is expected from chemical reactivity studles(10,15). Table I also presents electronic absorption spectra and the reduction and oxidation potentials of the electrogenerated (P)Rh(R) complexes. 

This rate expression is consistent with the reaction scheme shown in Eq. 10.6, formulated on the basis of the Krauss-Smith paper. Thus, the initially formed cuprate dimer/enone complex with lithium/carbonyl and copper/olefin coordinations [71, 72] transforms into the product via an intermediate or intermediates. A lithium/ carbonyl complex also forms, but this is a dead-end intermediate. Though detailed... 

Complex 77 has also been reported to catalyze the oxidative dimerization of alcohols to esters when the reactions are performed in the presence of base [76]. The presence of base presumably encourages the reversible attack of the alcohol onto the initially formed aldehyde to give a hemiacetal, which is further oxidized to give the ester product. Alcohols 87 and 15 were converted into esters 88 and 89 with good isolated yields (Scheme 20). Alternative iridium catalysts have been used for related oxidative dimerization reactions, and the addition of base is not always a requirement for the reaction to favor ester formation over aldehyde formation [77, 78]. 

Table 12.10 Tishchenko dimerization reaction catalyzed by PMS-supported rare-earth metal silylamide complexes.

A third important reaction of aromatic radical-cations is carbon-carbon bond formation with a further aromatic substrate. This reaction is limited to the oxidation in acetonitrile of substrates with electrondonating substituents. Radical-cations from benzene, naphthalene and anthracene form a-complexes but do not form a a-bonded reaction intermediate. Tlie dimerization reaction has been investigated both by pulse-radiolysis [22] in water and by electrochemical methods [27] in acetoni-... 

The first ab initio MO calculation of the reaction between MeLi and H2C=0 was carried out mostly at the HF/3-21G level of theory . The comparison of the reaction profiles for the monomer and dimer species revealed that the first complex formation was less exothermic and the barrier for the addition step was lower for the dimer reaction, but the overall barrier height was similar for the two systems. The overall reaction was more exothermic for the dimer reaction. 

---