Molecular diffusion dynamics

All these different mechanisms of mass transport through a porous medium can be studied experimentally and theoretically through classical models (Darcy s law, Knudsen diffusion, molecular dynamics, Stefan-Maxwell equations, dusty-gas model etc.) which can be coupled or not with the interactions or even reactions between the solid structure and the fluid elements. Another method for the analysis of the species motion inside a porous structure can be based on the observation that the motion occurs as a result of two or more elementary evolutions that are randomly connected. This is the stochastic way for the analysis of species motion inside a porous body. Some examples that will be analysed here by the stochastic method are the result of the particularisations of the cases presented with the development of stochastic models in Sections 4.4 and 4.5. 

Since the pioneering demonstration that cross-polarization C NMR spectra can be recorded, solid-state NMR spectroscopy has advanced rapidly and is now being used to study the structure and dynamics of a variety of polymer systems. Much of the success of solid-state NMR spectroscopy is due to the evolution of a variety of techniques for studying internuclear distances, anisotropy, torsion angles, atomic orientations, spin diffusion, molecular dynamics, and exchange processes, while maintaining the high resolution and sensitivity necessary for practically useful NMR experiments in polymers. 

The Langmuir-Hinshelwood picture is essentially that of Fig. XVIII-14. If the process is unimolecular, the species meanders around on the surface until it receives the activation energy to go over to product(s), which then desorb. If the process is bimolecular, two species diffuse around until a reactive encounter occurs. The reaction will be diffusion controlled if it occurs on every encounter (see Ref. 211) the theory of surface diffusional encounters has been treated (see Ref. 212) the subject may also be approached by means of Monte Carlo/molecular dynamics techniques [213]. In the case of activated bimolecular reactions, however, there will in general be many encounters before the reactive one, and the rate law for the surface reaction is generally written by analogy to the mass action law for solutions. That is, for a bimolecular process, the rate is taken to be proportional to the product of the two surface concentrations. It is interesting, however, that essentially the same rate law is obtained if the adsorption is strictly localized and species react only if they happen to adsorb on adjacent sites (note Ref. 214). (The apparent rate law, that is, the rate law in terms of gas pressures, depends on the form of the adsorption isotherm, as discussed in the next section.)... 

Fiber R and M Karplus 1990. Enhanced Sampling in Molecular Dynamics Use of the Time-Dependent Hartree Approximation for a Simulation of Carbon Monoxide Diffusion through Myoglobin. Journal of the American Chemical Society 112 9161-9175. 

Zhaiig X and C R A Callow 1992. Molecular Dynamics Study of Oxygen Diffusion in YBa2Cu306]9. Physical Review B46 457-462. 

Monte Carlo simulations require less computer time to execute each iteration than a molecular dynamics simulation on the same system. However, Monte Carlo simulations are more limited in that they cannot yield time-dependent information, such as diffusion coefficients or viscosity. As with molecular dynamics, constant NVT simulations are most common, but constant NPT simulations are possible using a coordinate scaling step. Calculations that are not constant N can be constructed by including probabilities for particle creation and annihilation. These calculations present technical difficulties due to having very low probabilities for creation and annihilation, thus requiring very large collections of molecules and long simulation times. 

The rate of chemical diffusion in a nonfiowing medium can be predicted. This is usually done with an equation, derived from the diffusion equation, that incorporates an empirical correction parameter. These correction factors are often based on molar volume. Molecular dynamics simulations can also be used. 

Molecular dynamics calculations are more time-consuming than Monte Carlo calculations. This is because energy derivatives must be computed and used to solve the equations of motion. Molecular dynamics simulations are capable of yielding all the same properties as are obtained from Monte Carlo calculations. The advantage of molecular dynamics is that it is capable of modeling time-dependent properties, which can not be computed with Monte Carlo simulations. This is how diffusion coefficients must be computed. It is also possible to use shearing boundaries in order to obtain a viscosity. Molec-... 

Further support for this approach is provided by modern computer studies of molecular dynamics, which show that much smaller translations than the average inter-nuclear distance play an important role in liquid state atom movement. These observations have conhrmed Swalin s approach to liquid state diffusion as being very similar to the calculation of the Brownian motion of suspended particles in a liquid. The classical analysis for this phenomenon was based on the assumption that the resistance to movement of suspended particles in a liquid could be calculated by using the viscosity as the frictional force in the Stokes equation... 

Figure 3 Calculated X-ray diffuse scattering patterns from (a) a full molecular dynamics trajectory of orthorhombic hen egg white lysozyme and (b) a trajectory obtained by fitting to the full trajectory rigid-body side chains and segments of the backbone. A full description is given in Ref. 13.

FIQ. 3 Diffusion coefficient of benzene molecules in benzene-polystyrene mixtures normalized by the diffusion coefficient of neat benzene molecular dynamics results, NMR measurements and prediction by the Mackie-Meares model [26]. 

Fig. 7 gives an example of such a comparison between a number of different polymer simulations and an experiment. The data contain a variety of Monte Carlo simulations employing different models, molecular dynamics simulations, as well as experimental results for polyethylene. Within the error bars this universal analysis of the diffusion constant is independent of the chemical species, be they simple computer models or real chemical materials. Thus, on this level, the simplified models are the most suitable models for investigating polymer materials. (For polymers with side branches or more complicated monomers, the situation is not that clear cut.) It also shows that the so-called entanglement length or entanglement molecular mass Mg is the universal scaling variable which allows one to compare different polymeric melts in order to interpret their viscoelastic behavior. 

These apparent restrictions in size and length of simulation time of the fully quantum-mechanical methods or molecular-dynamics methods with continuous degrees of freedom in real space are the basic reason why the direct simulation of lattice models of the Ising type or of solid-on-solid type is still the most popular technique to simulate crystal growth processes. Consequently, a substantial part of this article will deal with scientific problems on those time and length scales which are simultaneously accessible by the experimental STM methods on one hand and by Monte Carlo lattice simulations on the other hand. Even these methods, however, are too microscopic to incorporate the boundary conditions from the laboratory set-up into the models in a reahstic way. Therefore one uses phenomenological models of the phase-field or sharp-interface type, and finally even finite-element methods, to treat the diffusion transport and hydrodynamic convections which control a reahstic crystal growth process from the melt on an industrial scale. 

Whenever the polymer crystal assumes a loosely packed hexagonal structure at high pressure, the ECC structure is found to be realized. Hikosaka [165] then proposed the sliding diffusion of a polymer chain as dominant transport process. Molecular dynamics simulations will be helpful for the understanding of this shding diffusion. Folding phenomena of chains are also studied intensively by Monte Carlo methods and generalizations [166,167]. 

A crystallographic analysis of xenon binding to [NiFe] hydrogenase, together with a molecular dynamic simulation study of xenon and dihydrogen diffusion in the enzyme interior, suggests the existence of hydrophobic channels connecting the molecular surface with the active site 184). 

A review is given of the application of Molecular Dynamics (MD) computer simulation to complex molecular systems. Three topics are treated in particular the computation of free energy from simulations, applied to the prediction of the binding constant of an inhibitor to the enzyme dihydrofolate reductase the use of MD simulations in structural refinements based on two-dimensional high-resolution nuclear magnetic resonance data, applied to the lac repressor headpiece the simulation of a hydrated lipid bilayer in atomic detail. The latter shows a rather diffuse structure of the hydrophilic head group layer with considerable local compensation of charge density. 

Tarek et al. [388] studied a system with some similarities to the work of Bocker et al. described earlier—a monolayer of n-tetradecyltrimethylammonium bromide. They also used explicit representations of the water molecules in a slab orientation, with the mono-layer on either side, in a molecular dynamics simulation. Their goal was to model more disordered, liquid states, so they chose two larger molecular areas, 0.45 and 0.67 nm molecule Density profiles normal to the interface were calculated and compared to neutron reflectivity data, with good agreement reported. The hydrocarbon chains were seen as highly disordered, and the diffusion was seen at both areas, with a factor of about 2.5 increase from the smaller molecular area to the larger area. They report no evidence of a tendency for the chains to aggregate into ordered islands, so perhaps this work can be seen as a realistic computer simulation depiction of a monolayer in an LE state. 

---