Diels intermolecular

The hetero Diels-Alder [4+2] cycloaddition (HDA reaction) is a very efficient methodology to perform pyrimidine-to-pyridine transformations. Normal (NHDA) and Inverse (IHDA) cycloaddition reactions, intramolecular as well as intermolecular, are reported, although the IHDA cycloadditions are more frequently observed. The NHDA reactions require an electron-rich heterocycle, which reacts with an electron-poor dienophile, while in the IHDA cycloadditions a n-electron-deficient heterocycle reacts with electron-rich dienophiles, such as 0,0- and 0,S-ketene acetals, S,S-ketene thioacetals, N,N-ketene acetals, enamines, enol ethers, ynamines, etc. 

The chiral copper reagent 24 is an effective catalyst not only for intermolecular, hut also for intramolecular Diels-Alder reactions, as shown in the following schemes (Scheme 1.41, 1,42, 1.43). Synthetically useful octalin and decalin skeletons were synthesized in high enantio- and diastereoselectivity. The synthetic utility of this intramolecular Diels-Alder reaction has been demonstrated hy a short total synthesis of isopulo upone [23, 33d]. 

A domino reaction,in this case consisting of an inter- and an intramolecular Diels-Alder reaction, is a key step in the synthesis of the hydrocarbon pago-dane 30, reported by Prinzbach et al When the bis-diQnQ 27 is treated with maleic anhydride 4, an initial intermolecular reaction leads to the intermediate product 28, which cannot be isolated, but rather reacts intramolecularly to give the pagodane precursor 29 ... 

Acid chloride 5 is readily available from the known benzylic alcohol 6,4e but intermediate 4 is still rather complex. It was recognized that compound 4 could conceivably be formed in one step from 2-methoxyfuran (9)10 and iodotriflate 10. The latter compound was designed with the expectation that it could be converted to benzyne 8," a highly reactive species that could be intercepted in an intermolecular Diels-Alder reaction with 2-methoxyfuran (9) to give 7. The intermediacy of 7 is expected to be brief, for it should undergo facile conversion to the aromatized isomer 4 either in situ or during workup. 

Intermolecular [4C+2S] cycloaddition reactions where the diene moiety is contained in the carbene complex are less frequent than the [4S+2C] cycloadditions summarised in the previous section. However, 2-butadienylcarbene complexes, generated by a [2+2]/cyclobutene ring opening sequence, undergo Diels-Alder reactions with typical dienophiles [34,35] (Scheme 59). Also, Wulff et al. have described the application of pyranylidene complexes, obtained by a [3+3] cycloaddition reaction (see Sect. 2.8.1), in the inverse-electron-demand Diels-Alder reaction with enol ethers and enamines [87a]. Later, this strategy was applied to the synthesis of steroid-like ring skeletons [87b] (Scheme 59). 

The first examples of macrocyclization by enyne RCM were used in Shair s impressive biomimetic total synthesis of the cytotoxic marine natural product longithorone A (429) [180]. This unique compound features an unusual hep-tacyclic structure which, in addition to the stereogenic centers in rings A-E, is also chiral by atropisomerism arising from hindered rotation of quinone ring G through macrocycle F (Scheme 85). It was assumed that biosynthesis of 429 could occur via an intermolecular Diels-Alder reaction between [12]paracy-... 

The Diels-Alder cycloaddition is the best-known organic reaction that is widely used to construct, in a regio- and stereo-controlled way, a six-membered ring with up to four stereogenic centers. With the potential of forming carbon-carbon, carbon-heteroatom and heteroatom-heteroatom bonds, the reaction is a versatile synthetic tool for constructing simple and complex molecules [1], Scheme 1.1 illustrates two examples the synthesis of a small molecule such as the tricyclic compound 1 by intermolecular Diels-Alder reaction [2] and the construction of a complex compound, like 2, which is the key intermediate in the synthesis of (-)chlorothricolide 3, by a combination of an intermolecular and an intramolecular Diels-Alder cycloaddition [3]. 

The Diels-Alder reaction can be intermolecular or intramolecular and can be carried out under a variety of experimental conditions that will be illustrated in detail in the following chapters. 

There are many types of Diels-Alder reactions that are carried out under thermal conditions. This chapter will deal with the most significant developments, the potential and range of applications of this methodology of both the intermolecular and intramolecular cycloadditions in organic synthesis. 

The /zetero-Diels-Alder reaction permits heterocyclic-six- membered rings to be constructed by the interaction of heterodienes and/or heterodienophiles. Both the intermolecular and intramolecular versions of the /zctcro-Diels Alder reaction are, therefore, very important methods for synthesizing heterocyclic compounds. 

Asymmetric induction in the intermolecular Diels-Alder cycloaddition reactions can be achieved with chirally modified dienes and dienophiles as well as with chiral Lewis-acid catalysts [54-56]. 

Lewis-acid catalysis is effective in intermolecular as well as intramolecular /zomo-Diels-Alder reactions. Thus, complex polycyclic compounds 93 have been obtained in good yield by the cycloaddition of norbornadiene-derived dienynes 92 by using cobalt catalyst, whereas no reaction occurred under thermal conditions [91] (Scheme 3.18). 

Intermolecular befera-Diels-Alder reactions of enamino ketones with highly substituted vinyl ethers. Effect of high pressure on the kinetics and diastereoselectivity [77]... 

The rates of intermolecular Diels-Alder reactions of hydrophobic dienes and dienophiles are significantly increased when the cycloadditions are performed in pure ethylene glycol (EG) [49a]. Some examples are illustrated in Scheme 6.30. This performance is due to the fact that the EG (i) forms extensive hydrogen bonding, (ii) is able to solubilize hydrophobic dienes and dienophiles, and (hi) forms molecular aggregations with the reactants. 

Aqueous intermolecular Diels-Alder chemistry vernolepin revisited [16e]... 

To avoid problems with the separation of regiomers, dimethyl acetylene dicarboxylate (DMAD) was chosen as a dienophile. The intermolecular Diels-Alder reactions were performed in refluxing dichlorobenzene (bp 132 °C), while the intramolecular reaction of alkyne tethered pyrazinone required a solvent with a higher boiling point (bromobenzene, bp 156 °C). In the case of 3-methoxy or 3-phenyl pyrazinones a mixture of pyridinones and pyridines was obtained, while for the alkyne tethered analogue only the di-hydrofuropyridinone was isolated as the single reaction product. 

The preparation of 1-substituted 4//,6//-dihydrothieno[3,4-c]fiu an 5,5-dioxide and some intermolecular Diels-Alder reactions with typical dienophiles (e.g., DMAD) were reported (Scheme 3, <96JCS(P1)2699>). 

Catalyst 163 also catalyses the intermolecular [4+2] Diels-Alder-type reaction between alkynes 164 and dienes 165 (Scheme 5.43) [49b], Products 166 were obtained in an excellent regioselectivity and moderate to excellent yields. 

Scheme 5.43 Intermolecular [4+2] Diels-Alder-type reaction between alkynes and dienes...

Grieco utilized an aqueous intermolecular Diels-Alder reaction as the key step in forming the AB ring system of the potent cytotoxic sesquiterpene vernolepin. 87 Cycloaddition of sodium ( >3,5-hexa-dienoate with an a-substituted acrolein in water followed by direct reduction of the intermediate Diels-Alder adduct gave the desired product in 91% overall yield (Eq. 12.28). 

For clarification, individual transformations of independent functionalities in one molecule - also forming several bonds under the same reaction conditions -are not classified as domino reactions. The enantioselective total synthesis of (-)-chlorothricolide 0-4, as performed by Roush and coworkers [8], is a good example of tandem and domino processes (Scheme 0.1). I n the reaction of the acyclic substrate 0-1 in the presence of the chiral dienophile 0-2, intra- and intermolecular Diels-Alder reactions take place to give 0-3 as the main product. Unfortunately, the two reaction sites are independent from each other and the transformation cannot therefore be classified as a domino process. Nonetheless, it is a beautiful tandem reaction that allows the establishment of seven asymmetric centers in a single operation. 

So far, only those domino Knoevenagel/hetero-Diels-Alder reactions have been discussed where the cycloaddition takes place at an intramolecular mode however, the reaction can also be performed as a three-component transformation by applying an intermolecular Diels-Alder reaction. In this process again as the first step a Knoevenagel reaction of an aldehyde or a ketone with a 1,3-dicarbonyl compound occurs. However, the second step is now an intermolecular hetero-Diels-Alder reaction of the formed 1 -oxa-1,3 -butadiene with a dienophile in the reaction mixture. The scope of this type of reaction, and especially the possibility of obtaining highly diversified molecules, is even higher than in the case of the two-component transformation. The stereoselectivity of the cycloaddition step is found to be less pronounced, however. 

The combination of two successive [4+2] cycloadditions has already been described by Diels and Alder [la] for the reaction of dimethyl acetylenedicarboxylate with an excess of furan. A beautiful, more modern, example is the synthesis of pagodane (4-5) by Prinzbach [2], in which an intermolecular Diels-Alder reaction of 4-1 and 4-2 to give 4-3 is followed by an intramolecular cycloaddition. The obtained 4-4 is then transformed into 4-5 (Scheme 4.1). 

In Table 5.1 are listed six selected examples, which show that many functional groups are tolerated, and that the intermolecular (Path A) as well as the intramolecular Diels-Alder mode (Path B) provide good yields and reasonable to very high selectivities. 

Another intramolecular ene-yne metathesis followed by an intermolecular metathesis with an alkene to give a butadiene which is intercepted by a Diels-Alder reaction was used for the synthesis of condensed tricyclic compounds, as described by Lee and coworkers [266]. However, as mentioned above, the dienophile had to be added after the domino metathesis reaction was completed otherwise, the main product was the cycloadduct from the primarily formed diene. Keeping this in mind, the three-component one-pot reaction of ene-yne 6/3-94, alkene 6/3-95 and N-phenylmaleimide 6/3-96 in the presence of the Grubbs II catalyst 6/3-15 gave the tricyclic products 6/3-97 in high yield (Scheme 6/3.28). 

Today, multi-parallel synthesis lies at the forefront of organic and medicinal chemistry, and plays a major role in lead discovery and lead optimization programs in the pharmaceutical industry. The first solid-phase domino reactions were developed by Tietze and coworkers [6] using a domino Knoevenagel/hetero-Diels-Alder and a domino Knoevenagel/ene protocol. Reaction of solid-phase bound 1,3-dicarbonyl compounds such as 10-22 with aldehydes and enol ethers in the presence of piperidinium acetate led to the 1-oxa-1,3-butadiene 10-23, which underwent an intermolecular hetero-Diels-Alder reaction with the enol ethers to give the resin-bound products 10-24. Solvolysis with NaOMe afforded the desired dihydro-pyranes, 10-25 with over 90 % purity. Ene reactions have also been performed in a similar manner [7]. 

The readily available enantiopure acyclic hydroxy 2-sulfinyl butadiene 585 undergoes a highly face-selective Diels-Alder cycloaddition with PTAD to generate the densely functionalized cycloadduct 586 (Equation 84). The complete reversal of facial selectivity is observed when sulfonyl derivative 587 is treated with PTAD under identical conditions (Equation 85). These results demonstrate that the sulfinyl functionality is not just synthetically useful but also an extremely powerful element of stereocontrol for intermolecular Diels-Alder cycloadditions. On the other hand, the corresponding ( , )-hydroxy-2-sulfinyldienes treated with PTAD affords the cycloadducts in high yield but with moderate 7i-facial selectivity <1998CC409, 2005CEJ5136>. 

A one-pot, four-component process involving the in situ formation of an azadiene followed by an intermolecular or intramolecular Diels-Alder reaction for the synthesis of highly functionalized piperidone scaffolds has been reported [81]. The compounds were obtained in good yields and diastereoselectivities (Figure 5). 

Lipids from marine products have been studied less frequently. The detection of co-(o-alkylphenyl)alkanoic acids with 16,18 and 20 carbon atoms together with isoprenoid fatty acids (4,8,12-trimethyltetradecanoic acid and phytanic acid) and substantial quantities of bones from fish and molluscs has provided evidence for the processing of marine animal products in vessels [58 60]. C16, C18, and C20 co-(o-alkylphenyl)alkanoic acids are presumed to be formed during the heating of tri-unsaturated fatty acids (C16 3, C18 3 and C20 3), fatty acyl components of marine lipids, involving alkali isomerization, pericyclic (intermolecular Diels-Alder reaction) and aromatization reactions. 

In the intermolecular series, Diels-Alder cycloaddition of ethene to the pyrazi-none heterodiene led to the expected bicyclic cycloadduct (Scheme 6.95 b) [195], The details of this transformation, performed in pre-pressurized reaction vessels, are described in Section 4.3.2 [196], Similar cycloaddition reactions have also been studied on a solid phase (Scheme 7.58) [197]. 

---