Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Diazoacetates silyl

Functionalized silacyclobutanes 16 result from photochemical decomposition of [azido-, isocya-nato- and isothiocyanato-bis(tert-butyl)silyl]diazoacetates 15. They undergo a remarkably facile ring-expansion reaction to cyclic O-silyl ketene acetals 17 even at 60°C. [Pg.58]

The thermal [1] or photochemical [5] isomerization of N-silylated allylamine in the presence of Fe(CO)5 provides the corresponding N-silylated enamines 7a and 7b. Z-enamine 7b does not react in any of the examined cycloadditions. The cyclopropanation of E-enamine 7a with methyl diazoacetate under copper(I) catalysis provides the donor-acceptor-substituted cyclopropane 9 [1], which can be converted in good yield into the interesting dipeptide 10 [6]. [Pg.65]

Some examples of the lateral cyclization of suitable O-allyl and O-propargyl derivatives were discussed in CHEC-11(1996) <1996CHEC-II(8)747>. Thermal reaction of silyl diazoacetate 303 in xylene provides unspecific decomposition and a minor amount (about 2%) of a colorless solid can be precipitated with ether. The X-ray diffraction analysis identified the structure 305, which is a product of the lateral criss-cross cycloaddition of primarily formed azine 304 (Scheme 43) <2000T4139>. [Pg.411]

For cyclopropanations with ethyl diazoacetate, a rather weak influence of the olefin structure has been noted 59 60, (Table 7). The preference for the sterically less crowded cyclopropane is more marked for 1,2-disubstituted than for 1,1-disubstituted olefins. The influence of steric factors becomes obvious from the fact that the ratio Z-36/E-36, obtained upon cyclopropanation of silyl enol ethers 35, parallels Knorr s 90> empirical substituent parameter A.d of the group R 60). These ZjE ratios, however, do not represent the thermodynamic equilibrium of both diastereomers. [Pg.105]

Diverging results have been reported for the carbenoid reaction between alkyl diazoacetates and silyl enol ethers 49a-c. Whereas Reissig and coworkers 60) observed successful cyclopropanation with methyl diazoacetate/Cu(acac)2, Le Goaller and Pierre, in a note without experimental details u8), reported the isolation of 4-oxo-carboxylic esters for the copper-catalyzed decomposition of ethyl diazoacetate. According to this communication, both cyclopropane and ring-opened y-keto ester are obtained from 49 c but the cyclopropane suffers ring-opening under the reaction conditions. [Pg.112]

C-H activation at a primary benzylic site was the key step in very short syntheses of lig-nans 206 and 207 (Scheme 14.27) [138]. Even though both the substrate 203 and the vinyl-diazoacetate 204 contain very electron-rich aromatic rings, C-H activation to form 205 (43% yield and 91% ee) is still possible because the aromatic rings are sterically protected from electrophilic aromatic substitution by the carbenoid. Reduction of the ester in (S)-205 followed by global deprotection of the silyl ethers completes a highly efficient three-step asymmetric total synthesis of (-i-)-imperanene 206. Treatment of (R)-205 in a more elaborate synthetic sequence of a cascade Prins reaction/electrophilic substitution/lacto-nization results in the total synthesis of a related lignan, (-)-a-conidendrin 207. [Pg.334]

Furthermore, 1,3-oxathiolanes 255 are efficiently converted, via sulfur ylide intermediates, to 1,4-oxathianes 256 and 257 by ring expansion with a silylated diazoacetate in the presence of copper catalyst (Scheme 27) <2002GC346, 2005T43>. [Pg.894]

Silyl-substituted diazoketones 29 cycloadd with aryl isocyanates to form 1,2,3-triazoles 194 (252) (Scheme 8.44). This reaction, which resembles the formation of 5-hydroxy-l,2,3-triazoles 190 in Scheme 8.43, has no analogy with other diazocarbonyl compounds. The beneficial effect of the silyl group in 29 can be seen from the fact that related diazomethyl-ketones do not react with phenyl isocyanate at 70 °C (252). Although the exact mechanistic details are unknown, one can speculate that the 2-siloxy-1-diazo-1-alkene isomer 30 [rather than 29 (see Section 8.1)] is involved in the cycloaddition step. With acyl isocyanates, diazoketones 29 cycloadd to give 5-acylamino-l,2,3-thiadiazoles 195 by addition across the C=S bond (252), in analogy with the behavior of diazomethyl-ketones and diazoacetates (5). [Pg.580]

Silyl enol ethers can also be used in the cyclopropanation reaction. Reissig showed that the reaction between methyl diazoacetate 53 and various enol ethers 52a-c using bu-box ligand 3 proceeded in moderate yields, as shown in Table 9.5 (Fig. 9.17fl), with trans/cis ratios up to 97 3 and ee between 32 and 49%. Pfaltz showed that cyclic enol ethers can be used as well." Cyclopentenyl enol ether 55 proceeded with methyl diazoacetate 53 and bu-box ligand 3 to afford the cyclopropanation products in 56% yield, a trans/cis ratio of 27 73, trans ee of 87% and cis ee of 92% (Fig. 9.11b, p. 544). [Pg.541]

A related allylic C-H insertion that has considerable promise for strategic organic synthesis is the reaction with enol silyl ethers [23]. The resulting silyl-protected 1,5-dicarbonyls would otherwise typically be formed by means of a Michael addition. Even though with ethyl diazoacetates vinyl ethers are readily cyclopropanated [l],such reactions are generally disfavored in trisubstituted vinyl ethers with the sterically crowded donor/acceptor carbenoids [23]. Instead, C-H insertion predominates. Again, if sufficient size differentiation exists at the C-H activation site, highly diastereoselective and enantioselective reactions can be achieved as illustrated in the reaction of 20 with 17 to form 21 [23]. [Pg.87]

In the presence of alkenes, photolysis of alkyl (silyl)diazoacetates leads mainly to the formation of cyclopropanes as diastereomeric mixtures4,111,112. With (Z)- and ( )-but-2-ene, the cyclopropanation is not completely stereospecific with respect to the double bond configuration, but gives a small amount of the wrong isomer these results point to the participation of a triplet carbene in the cyclopropanation reaction. Allylic C,H insertion products are also formed their yield increases in the series 1,1-, 1,2-, tri- and tetrasubstituted C=C bond. With 2,3-dimethyl-but-2-ene, the allylic C,H insertion product is formed at the complete expense of the cyclopropane. [Pg.755]

For the transition-metal catalyzed decomposition of silyl-substituted diazoacetates 205 [silyl = SiMe3, SiEt3, SiMeiBu-i, SitPr-i SiPtnBiW, SiMe2SiMe3], copper triflate and dirhodium tetrakis(perfluorobutyrate) proved to be the best catalysts114. While these two catalysts induce the elimination of N2 at 20 °C even with bulky silyl substituents, dirhodium-tetraacetate even at 100 °C decomposes only the trimethylsilyl-and triethylsilyl-diazoacetates. When the decomposition reactions are carried out in... [Pg.755]

With the same catalysts, carbene transfer from diazoacetates 205 [silyl groups SiMe3, SiEt3, Si(Pr-i)3] to 1-hexene and styrene was studied4,117. The yields of cyclopropanes were usually higher in the metal-catalyzed than in the photochemical version. Interestingly, the metal-catalyzed procedure gave preferentially -210, whereas... [Pg.756]

Methoxycarbonylmetkylation.1 The reaction of silyl enol ethers of aldehydes or ketones with methyl diazoacetate [Rh2(OAc)4 or Cu(acac)2] forms silyloxycyclo-propanecarboxylates, which are opened by N(C2H5)3HF (aldehydes) or HC1 (ketones) to form a-methoxycarbonylmethylated aldehydes or ketones. [Pg.217]

The direct photolysis of a-(alkenyloxy)silyl-substituted diazoacetate 76a leads to a carbene, which undergoes an intramolecular [2 +1] cydoaddition with the terminal alkene to afford 77a in 55% yield (Scheme 4.35) [55]. An oc-alkenysilyl-substituted diazoacetate 76b also leads to 77b in 68% yield (Scheme 4.35) upon direct irradiation [56]. [Pg.111]

A large variety of silyl enol ethers 96 has been transformed to the corresponding cyclopropanes 97 by reaction with methyl diazoacetate in the presence of copper catalysts (Eq. 28). Although at first the isolation of mainly ring-opened products had been reported 56), the preparation of methyl 2-siloxycyclopropanecarboxylates proceeds generally in very good yields (Table 2)57). [Pg.90]

Table 2. Synthesis of methyl 2-siloxycyclopropanecarboxylates 97 from methyl diazoacetate and silyl enol ethers 96 according to Eq. 28 and ring cleavage to y-oxoesters 98... [Pg.91]

The prostaglandin approach above (Eq. 29) also shows that the reaction with the carbenoid is compatible with further functions and even a second olefinic unit. However, this second double bond is left unattacked only because of its deactivation by the allylic siloxy group. Competition experiments have demonstrated that simple olefins like styrene or cyclohexene react with methyl diazoacetate under copper-catalysis in rates comparable to those of silyl enol ethers57). [Pg.92]

According to Scheme 1 methyl 2-siloxycyclopropanecarboxylates should also be available from donor-acceptor-substituted olefins like 100, which are easily synthesized by silylation of the corresponding 1,3-dicarbonyl compounds. Cyclopropanation of 100 with methyl diazoacetate or diazomethane could be realized in the presence of Cu(II)-catalysts, but due to the relatively low reactivity of the olefins a large excess of diazoalkanes had to be employed. This makes the isolation of 101 troublesome and therefore direct hydrolysis with acid to give 1,4-dicarbonyl compounds 102 is advantageous (Eq. 32) 66). [Pg.94]

The addition of alkoxycarbonylcarbene derived by catalysed decomposition of methyl diazoacetate to several simple, and in particular terminal, alkynes leads to low yields S7), but the reaction with 1 -trimethylsilylalkynes proceeds reasonably efficiently subsequent removal of the silyl-group either by base or fluoride ion provides a route to l-alkyl-3-cyclopropenecarboxylic acids. In the same way 1,2-bis-trimethylsilyl-ethyne can be converted to cyclopropene-3-carboxylic acid itself58 . The use of rhodium carboxylates instead of copper catalysts also generally leads to reasonable yields of cyclopropenes, even from terminal alkynes 59). [Pg.149]

Photochemical Fe(CO)5-induced rearrangement of silylated allyl amine 9 gave N-silylated enamine 1015, which on subsequent Cu-catalyzed cyclopropanation by methyl diazoacetate afforded cyclopropane derivative 11. The use of an optically active catalyst gave an asymmetric induction of 56% ee for the cis isomer and 20% ee for the trans isomer. Further acid-induced ring cleavage afforded the -formyl ester 12, whereas reduction and desilylation produced aminocyclopropane carboxylic acid 13 (equation 2). [Pg.994]

Diazoacetic acid silyl esters can be prepared by fra t-esterification of tert-butyl diazoacetate with trialkylsilyl triflate <1985JOM33>. Analogously prepared (alkenyloxy)silyl 203 and (alkynyloxy)silyl diazoacetates 206 underwent silicon-tethered 1,3-dipolar cycloaddition reactions as shown in Scheme 37 and Equation (38). Compound 205 resulted from a lateral criss-cross cycloaddition of the intermediate azine 204, which was formed from two molecules of 203 by diazo + diazo or diazo + carbene reaction <2000T4139>. On the other hand, when silyl diazoacetates 206 were kept in xylene at 142 °C for 1 h, bicyclic pyrazoles 207 were obtained (Equation 38). [Pg.1006]

The most frequently used metallic catalysts for acyldiazo- and (alkoxycarbonyl)dia-zomethanes are complexes or salts of rhodium, palladium and copper. Alkenylboronic esters A-silylated allylamines and acetylenes are successfully cyclopropanat-ed with diazocarbonyl compounds under catalysis of one of those metal derivatives. Newly developed metallic catalysts for diazoacetic esters include polymer-bound, quantitatively recoverable Rh(II) carboxylate salts ", Cu(II) supported on NATION ion exchange poly-mer ruthenacarborane clusters, Rh2(NHCOCH3)4 which produces cyclopropanes with substantially enhanced trans (anti) selectivity as shown below and (rj -CsHs)... [Pg.290]

In contrast to the carbene and carbenoid chemistry of simple diazoacetic esters, that of a-silyl-a-diazoacetic esters has not yet been developed systematically [1]. Irradiation of ethyl diazo(trimethylsilyl)acetate in an alcohol affords products derived from 0-H insertion of the carbene intermediate, Wolff rearrangement, and carbene- silene rearrangement [2]. In contrast, photolysis of ethyl diazo(pentamethyldisilanyl)acetate in an inert solvent yields exclusively a ketene derived from a carbene->silene->ketene rearrangement [3], Photochemically generated ethoxycarbonyltrimethyl-silylcarbene cyclopropanates alkenes and undergoes insertion into aliphatic C-H bonds [4]. Copper-catalyzed and photochemically induced cyclopropenation of an alkyne with methyl diazo(trimethylsilyl)acetate has also been reported [5]. [Pg.149]

Silyl oxazoles 55 have been used as precursors to 4-halooxazoles 56, which can then serve as coupling partners in Pd-catalyzed Sonogashira coupling reactions <2000SL692>. The silylated oxazole 55 was prepared in good yield by a Huisgen oxazole synthesis which involved a rhodium-catalyzed reaction between ethyl (triethylsilyl)diazoacetate 54 and benzonitrile (Scheme 7). [Pg.496]

It is clear from the known diazoalkane reactivity pattern [14] that only derivatives R R C=N2 can be employed that do not react with phosphines (cf. Section 3.2.10.5). Transformations can be observed for the easy-to-handle diazoacetates and diazomalonates as well as for a number of other compounds, e. g., trimethyl-silyl diazomethane. Aryldiazoalkanes, however, form phosphazenes that do not release the alkylidene group. Another problem can arise from the (catalytic) formation of ketazines - again, unreactive byproducts. [Pg.1081]

Methyl y-oxocarboxylates.2 Silyl enol ethers react with methyl diazoacetate in the presence of a copper salt to form siloxy-substituted cyclopropanes (1) in useful yields. Cleavage of the siloxy group with fluoride ion (4, 477-478) affords y-oxo esters (2) in good yields. [Pg.479]

The photochemical extrusion of nitrogen from silyl-substituted diazoacetates (hv > 300 nm) in the presence of various alkenes leads mainly to the formation of cyclopropanes (Table 4). Reactions of trimethylsilyl- and triisopropylsilyldiazoacetates with monosubstituted alkenes such as hex-1-ene or styrene (Table 4, entries 1-3) show interesting results. The formation of the thermodynamically less favored Z-isomer increases with growing steric demand of the silyl substituent. The cyclopropanation of ( )- and (Z)-but-2-ene (Table 4, entries 5 and 6) reveals that the addition reaction does not proceed completely stereospecifically. Small amounts of the wrong diastereomer can be detected, which is believed to arise from the triplet spin state of the carbene. Insertion into allylic C-H bonds occurs in the case of di- or trisubstituted alkenes (Table 4, entries 4-7). [Pg.825]

The carbenoid reaction between alkyl diazoacetates and enol ethers, enol acetates and silyl enol ethers furnishes P-oxycyclopropane carboxylates (see Tables 2, 4, 5, 6, 7 and Scheme 5). The recently recognized synthetic versatility of these donor/acceptor-substituted cyclopropanes i 2,io3) (precursors of 1,4-dicarbonyl and P, 7-unsaturated carbonyl compounds, 4-oxocarboxylic acids and esters, among others) gave rise to the synthesis of a large number of such systems with a broad variation of substituents p-acetoxycyclopropanecarboxylates , p-alkoxy- or p-aryloxysubstituted cyclopropanecarboxylates 2-alkoxy-1-methyl-1-cy-... [Pg.109]


See other pages where Diazoacetates silyl is mentioned: [Pg.65]    [Pg.88]    [Pg.111]    [Pg.96]    [Pg.411]    [Pg.290]    [Pg.190]    [Pg.718]    [Pg.55]    [Pg.93]    [Pg.306]    [Pg.150]    [Pg.150]    [Pg.565]    [Pg.1085]    [Pg.86]    [Pg.797]   
See also in sourсe #XX -- [ Pg.99 , Pg.628 ]




SEARCH



Diazoacetate

Diazoacetates

Diazoacetic

© 2024 chempedia.info