Description release

Mackay D, Yeun ATK (1983) Mass transfer coefficients correlations for volatilisation of organic solutes from water. Environ Sci Technol 17 211-233 Maier-Reimer E, Kriest I, Segschneider J, Wetzel P (2005) The UAMburg Ocean Carbon Cycle Model HAMOCC5.1 - Technical Description Release 1.1 -. MPI Reports on Earth System Science No. 14 1-57... 

Release Category Definition Release Category Description Release Magnitude Release Time Frame... 

The fir.-fit line of the file (see Figure 2-110) - the HEADER record - hold.s the moleculc. s classification string (columns 11-50), the deposition date (the date when the data were received by the PDB) in columns 51-59, and the PDB (Dcode for the molecule, which is unique within the Protein Data Bank, in columns 63-66. The second line - the TITLE record - contains the title of the experiment or the analysis that is represented in the entry. The subsequent records contain a more detailed description of the macromolecular content of the entiy (COMPND), the biological and/or chemical source ofeach biological molecule in the entiy (SOURCE), a set ofkeywords relevant to the entiy (KEYWDS). information about the experiment (EXPDTA), a list of people responsible for the contents of this entiy (.AUTHOR), a history of modifications made to this entiy since its release (REVDAT), and finally the primaiy literature citation that describes the experiment which resulted in the deposited dataset ()RNL). 

The protein sequence database is also a text-numeric database with bibliographic links. It is the largest public domain protein sequence database. The current PIR-PSD release 75.04 (March, 2003) contains more than 280 000 entries of partial or complete protein sequences with information on functionalities of the protein, taxonomy (description of the biological source of the protein), sequence properties, experimental analyses, and bibliographic references. Queries can be started as a text-based search or a sequence similarity search. PIR-PSD contains annotated protein sequences with a superfamily/family classification. 

MM2 was, according the web site of the authors, released as MM2 87). The various MM2 flavors are superseded by MM3, with significant improvements in the functional form [10]. It was also extended to handle amides, polypeptides, and proteins [11]. The last release of this series was MM3(%). Further improvements followed by starting the MM4 series, which focuses on hydrocarbons [12], on the description of hyperconjugative effects on carbon-carbon bond lengths [13], and on conjugated hydrocarbons [14] with special emphasis on vibrational frequencies [15]. For applications of MM2 and MM3 in inorganic systems, readers are referred to the literature [16-19]. 

The description given apphes to DR processes that are based on the use of gaseous reductants ia shaft furnaces, batch retorts, and fluidized beds. In the processes that use sohd reductants, eg, coal (qv), the reduction is accomphshed to a minor extent first by volatiles and reduciag gases that are released as the coal is heated and then by CO that is formed by gasification of fixed carbon contained ia the coal char with CO2. Reductioa by sohd carboa and coal volatiles ia kilns is insignificant. 

The Toxic Substances Control Act (TSCA) was enacted in 1976 to identify and control toxic chemical ha2ards to human health and the environment. One of the main provisions of TSCA was to estabUsh and maintain an inventory of all chemicals in commerce in the United States for the purpose of regulating any of the chemicals that might pose an unreasonable risk to human health or the environment. An initial inventory of chemicals was estabhshed by requiring companies to report to the United States Environmental Protection Agency (USEPA) all substances that were imported, manufactured, processed, distributed, or disposed of in the United States. Over 50,000 chemical substances were reported. PoUowing this initial inventory, introduction of all new chemical substances requires a Premanufacturing Notification (PMN) process. To be included in the PMN are the identity of the new chemical, the estimated first year and maximum production volume, manufacture and process information, a description of proposed use, potential release to the environment, possible human exposure to the new substance, and any health or environmental test data available at the time of submission. In the 10 years that TSCA has been in effect, the USEPA has received over 10,000 PMNs and up to 10% of the submissions each year are for dyes (382)... 

The thermal diffusivity for aluminum is = 5.2 x 10 m s [50]. Use this value to determine the time necessary for substantial temperature change over the length scale of 10 following creation of shear bands in the shock front. Should the temperature evolution of the shear band be included in a constitutive description on time scales of compression and release ... 

As you continue to read, scan over the sidebar discussions. These provide a summary of the toxicity and fate data for the principal hazardous chemicals released by petroleum refinery operations. The sidebar discussions also provide descriptions of the most common routes by which these pollutants enter the environment as a result of common refinery practices and operations. 

The following Is a hypothetical example of how one manufacturer might complete the toxic chemical release inventory reporting Form R. The facility information is purely fictitious and does not represent any known manufacturing facility. The example begins with descriptions of the facility (a lead-acid storage battery manufacturer) and of the production process at the faciiity. The completion of each section of Form R is explained and a copy of Form R, as it would be completed by this facility, follows. 

Even, limited PSAs use and contain much information. This information may come as memos and process reports and flow sheets, equipment layout, system descriptions, toxic inventory, hazardous chemical reactions, test, maintenance and operating descriptions. From this, data and analyses are prepared regarding release quantities, doses, equipment reliability, probability of exposure, and the risk to workers, public, and environment. An executive summary analysis is detailed, and recommendations made for risk reduction. Thus the information will be text, calculations of envelope fracture stresses, temperatures, fire propagation, air dispersion, doses, and failure probabilities - primarily in tabular form. 

Section 8.1 provided a description of a core melt. This section backs up to describe thermal-hydraulic calculations of the phenomena before, during, and after the accident, and other calculations to estimate the radioactive release from containment. In this accident physics cannot be analyzed separately from in-plant transport. 

IDLH). For a combustible release, the code gives an estimate of the mass of vapor within the flammable limits. Model Description References Model description and references I... 

The different steps of the flow and batch processes of the industrial production must be roughly described early in the design process. A more detailed description may be needed in regions w here heat and contaminants are released. Production design engineers are likely to provide the information needed. 

Detailed strength studies made by reloading and release of metals from high pressure provide more evidence that ideal elastic-plastic behaviors are not descriptive. An example of such a study by Lipkin and Asay [77L02] on an aluminum alloy is shown in Fig. 2.11. In this case, there is considerable... 

Perhaps the most visible technical problems studied and the most data available on shock-compressed solids are focused on the loading portion of wave profiles. Often, the portion of the wave profile corresponding to the release of pressure to atmospheric, but elevated temperature, values is the more descriptive of solids in the high pressure state. 

With nanosecond time resolution, sensitive, accurate detectors, studies of these release waves have proven to be particularly revealing. First-order descriptions of release properties were obtained with rudimentary instrumentation from the earliest studies [65A01] it has required the most sophisticated modern instrumentation to provide the necessary detail to obtain a clear picture of the events. Characteristically different profiles are encountered in the strong-shock, elastic, and elastic-plastic regimes. 

Release waves for the elastic-plastic regime are dominated by the strength effect and the viscoplastic deformations. Here again, quantitative study of the release waves requires the best of measurement capability. The work of Asay et al. on release of aluminum as well as reloading, shown in Fig. 2.11, demonstrates the power of the technique. Early work by Curran [63D03] shows that limited time-resolution detectors can give a first-order description of the existence of elastic-plastic behavior on release. 

This chapter provides (i) a brief review of the chemistry involved in chiral host-chiral guest recognition involving primary amines (ii) a description of a nonchromatographic (equilibrium or bind-release based) separation process devel-... 

Honda Multi-Matic News Release. (1997). Technical Description ot the System and its Operation. Torrance, CA Author. 

This particular type of explosion is less known and understood, but nevertheless is an important type for damage consideration. This is a type of pressure release explosion and there are several descriptions. 

The available range of plastics is very wide with a variety of compositions and related properties within any one type description. Even when physical properties and formulation are specified, minor variations in trace additives, release agents, moulding cycles, etc. may have a considerable influence on corrosivity. Table 18.18 can therefore be considered only as a guide and even in this sense much more experimentation is needed to provide the full picture. In the present state of technology precise information is only likely to result from tests carried out on the material of interest various suitable test methods have been described in the literature ... 

Surprisingly the water consumption of a starter battery, provided it contains anti-monial alloys, is affected by the separator. Some cellulosic separators as well as specially developed polyethylene separators (e.g., DARAMIC V [76]) are able to decrease the water consumption significantly. The electrochemical processes involved are rather complex and a detailed description is beyond the scope of this chapter. Briefly, the basic principle behind the reduction of water loss by separators is their continuous release of specific organic molecules, e.g., aromatic aldehydes, which... 

---