Dependence on permeability

During oxidative degradation, a concentration gradient always develops at a film surface. Inasmuch as the depth profile depends on permeabilities and reaction rates, the effect is more noticeable in photooxidations than in thermal oxidations. An unusually marked skin effect observed in photooxidized polypropylene has been ascribed (14) to the action of chronophores located at or near the surface. 

As the permeability and framework mineralogy are spatially variable, cementation in general is expected to show spatial variability and an initial tendency to produce heterogeneous lithification. In particular, when dependent on fluid flow, the effect of textural and compositional heterogeneities is expected to prevail during diagenesis. When diage-netic processes are dependent solely on diffusion, these effects are less distinct as diffusion is less dependent on permeability. 

Size exclusion chromatography Size dependence on permeability through packed column. T5qjically pressure is used as driving force, Tsec oc AP Tsec oc - log(a ) ... 

Air flow into system must be sufficient to maintain pressure (depends on permeability of soil and integrity of walls below ground le el... 

Vacuum the core/sandpack for half an hour to one day, depending on permeability ... 

The method for simulating polymer flooding presented here, while similar in many ways to previous techniques, differs in several respects. Bondor et al." solve the fluid flow equations numerically in three dimensions, consider three-phase flow, and simulate thickened water as a fourth phase. They do not, however, simulate the dependence of retention and resistance factors on permeability, nor do they consider degradation. Jewett and Schurz describe a layered model with retention and resistance factors dependent on permeability, but do not include capillarity, crossflow, or gravity effects. 

Magnetic flux density in a material— dependence on permeability and magnetic field strength... 

The intensity of the magnetic field produced by eddy current is depended on electrical conductivity and magnetic permeability of the studied area. In case of a uniform structure, when the conductivity of the material is high, the intensity of the induced magnetic field is big and signal received by probe Hp is small. 

The conditloci to be satisfied by the pressure difference, if (10,18) is to be a good approximation, is not so demanding as that needed to ensure that (10.14) is a good approximation, and it does not depend on the permeability of the medium. Thus (10.18), applied at sufficiently high pressure, should provide a method of determining which is more robust than (10.14)... 

Water-Vapor Permeability. Water-vapor permeabiUty depends on the polymer used for the coating layer and its stmcture. Vinyl-coated fabrics have Httie water-vapor permeabiUty due to the coating layer. Although polyurethane polymer is water-vapor permeable, urethane-coated fabrics also have low permeabiUty values due to their soHd layer stmcture. On the other hand, man-made leathers have good permeabiUty values as high as that of leather due to their porous layer stmcture. The permeabiUty of grain-type is lower than that of suede-type, influenced by finishing method. 

Toxicity. The toxicity of barium compounds depends on solubility (47—49). The free ion is readily absorbed from the lung and gastrointestinal tract. The mammalian intestinal mucosa is highly permeable to Ba " ions and is involved in the rapid flow of soluble barium salts into the blood. Barium is also deposited in the muscles where it remains for the first 30 h and then is slowly removed from the site (50). Very Httle is retained by the fiver, kidneys, or spleen and practically none by the brain, heart, and hair. 

Materials of Construction. Glass has excellent corrosion-resistance to wet or dry bromine. Lead is very usefiil for bromine service if water is less than 70 ppm. The bromine corrosion rate increases with concentrations of water and organics. Tantalum and niobium have excellent corrosion-resistance to wet or dry bromine. Nickel has usefiil resistance for dry bromine but is rapidly attacked by wet bromine. The fluoropolymers Kynar, Halar, and Teflon are highly resistant to bromine but are somewhat permeable. The rate depends on temperature, pressure, and stmcture (density) of fluoropolymer (63). 

Barrier Layers. Depending on composition, barrier layers can function simply as spatial separators or they can provide specified time delays by swelling at controlled rates or undergoing reactions such as hydrolysis or dissolution. Suitable barrier materials include cellulose esters and water-permeable polymers such as gelatin and poly(vinyl alcohol) (see Barrier polymers). 

For incompressible cake, the pressure distribution and the rate depend on the resistance of the filter medium and the permeability of the cake. Figure L8-150 shows several possible pressure profiles in the cake with increasing filtration rates through the cake. It is assumed that r /i i = 0.8 and /p//i = 0.6. The pressure at / = ri, corresponds to pressure drop across the filter medium Ap, with the ambient pressure taken to be zero. The filtration rate as well as the pressure distribution depend on the medium resistance and that of the cake. High medium resistance or blinding of the medium results in greater penalty on filtration rate. 

The grounding or penetration depth of the electrical resistance in conductors is, according to Eq. (3-42), dependent on the specific resistance and the frequency. The penetration depth, t, is the distance at which the field strength has fallen by 1/e,- is the relative permeability [35] ... 

Filtrates that are acceptable with a low quantity of fines that pass trough the filter cloth in the first few seconds of cake formation. Broadly, and depending on particle size and cloth permeability, the filtrate may contain 1,000 to 5,000 ppm insolubles. 

Permeability is normally determined using linear flow in the incompressible or compressible form, depending on whether a liquid or gas is used as the flowing fluid. The volumetric flowrate Q (or Q ,) is determined at several pressure drops. Q (or Q ,) is plotted versus the average pressure p . The slope of this line will yield the fluid conductivity K or, if the fluid density and viscosity are known, it provides the intrinsic permeability k. For gases, the fluid conductivity depends on pressure, so that... 

---