Density secondary

SECM - scanning electrochemical microscopy Secondary current distribution - current density Secondary battery - battery... 

Similar in some respects to an Exploding BridgeWire Detonator, the Exploding Foil Initiator uses a high electrical current to vaporize a foil and accelerate a dielectric flyer down a short barrel (typically about 0.2 mm long). The kinetic energy of the flyer is sufficient to initiate high density secondary explosives such as HNS directly. Invented in 1965 by John Stroud of the Lawrence Livermore National Laboratory. 

Accelerators are products that increase both the rate of sulfur crosslinking in a rubber compound and crosslink density. Secondary accelerators, when added to primary accelerators, increase the rate of vulcanization and degree of crosslinking, with the terms primary and secondary being essentially arbitrary. A feature of such binary acceleration systems is the phenomenon of synergism. Where a combination of accelerators is synergistic, its effect is always more powerful than the added effects of the individual components. 

C. In contrast to the PS/PPO system that displayed deviations from simple additivity, PMMA/SAN showed a linear dependence of by upon blend composition. As discussed by Robertson and Wilkes (2000, 2001), the volume relaxation properties of these blend systems are related to the different density, secondary relaxation, and fragility characteristics of PMMA/SAN and PS/PPO. 

Sotomura et al. [252] have reported a new composite cathode for a high-energy density secondary lithium battery, which consists of 2,5-dimercapto 1,3,4-thiadia-... 

The condensation of aldehydes or ketones with secondary amines leads to "encunines via N-hemiacetals and immonium hydroxides, when the water is removed. In these conjugated systems electron density and nudeophilicity are largely transferred from the nitrogen to the a-carbon atom, and thus enamines are useful electroneutral d -reagents (G.A. Cook, 1969 S.F. Dyke, 1973). A bulky heterocyclic substituent supports regio- and stereoselective reactions. 

Lasers are used to deliver a focused, high density of monochromatic radiation to a sample target, which is vaporized and ionized. The ions are detected in the usual way by any suitable mass spectrometer to produce a mass spectrum. The yield of ions is often increased by using a secondary ion source or a matrix. 

Each isomer has its individual set of physical and chemical properties however, these properties are similar (Table 6). The fundamental chemical reactions for pentanes are sulfonation to form sulfonic acids, chlorination to form chlorides, nitration to form nitropentanes, oxidation to form various compounds, and cracking to form free radicals. Many of these reactions are used to produce intermediates for the manufacture of industrial chemicals. Generally the reactivity increases from a primary to a secondary to a tertiary hydrogen (37). Other properties available but not Hsted are given in equations for heat capacity and viscosity (34), and saturated Hquid density (36). 

Sodium is used as a heat-transfer medium in primary and secondary cooling loops of Hquid-metal fast-breeder power reactors (5,155—157). Low neutron cross section, short half-life of the radioisotopes produced, low corrosiveness, low density, low viscosity, low melting point, high boiling point, high thermal conductivity, and low pressure make sodium systems attractive for this appHcation (40). 

It is also necessary to reduce the intensity of the radiation admitted into the pyrometer, because pyrometer lamp filaments should not be subjected to temperatures exceeding 1250°C. The reduction is accomplished by a screen or screens in manually operated secondary pyrometers they are usually neutral-density filters. 

Several types of secondary pyrometer are available. In addition to those that measure by varying lamp current, some pyrometers maintain the lamp at constant current but interpose a wedge of graduated neutral density, whose position is a measure of temperature. Also, automatic pyrometers are available in which the eye is replaced by a detector and the measuring element is operated by a servo. In general, the accuracy of the automatic pyrometer is somewhat less than that achieved manually by a skilled operator. 

---