Dacron

Not all synthetic polymers are used as fibers Mylar for example is chemically the same as Dacron but IS prepared in the form of a thin film instead of a fiber Lexan is a polyester which because of its impact resistance is used as a shatterproof substitute for glass It IS a polycarbonate having the structure shown... 

The ethylene glycol liberated by reaction (5.L) is removed by lowering the pressure or purging with an inert gas. Because the ethylene glycol produced by reaction (5.L) is removed, proper stoichiometry is assured by proceeding via the intermediate, bis(2-hydroxyethyl) terephthalate otherwise the excess glycol used initially would have a deleterious effect on the degree of polymerization. Poly(ethylene terephthalate) is more familiar by some of its trade names Mylar as a film and Dacron, Kodel, or Terylene as fibers it is also known by the acronym PET. 

Odon 81, filament Odon 42, needled fabrics Amel, filament Dacron, filament Dacron, filament, siUcone treated... 

Dacron, filament, M-31 Dacron, combination filament and spun Creslan, spun Azoton, spun Verel, regular, spun Odon 81, spun Dynel, spun... 

Odon 81, spun Odon 42, spun Dacron, needled... 

Poly(ethylene terephthalate), the predominant commercial polyester, has been sold under trademark names including Dacron (Du Pont), Terylene (ICI), Eortrel (Wellman), Trevira (Hoechst-Celanese), and others (17). Other commercially produced homopolyester textile fiber compositions iaclude p oly (1,4-cyc1 oh exa n e- dim ethyl en e terephthalate) [24936-69-4] (Kodel II, Eastman), poly(butylene terephthalate) [26062-94-2] (PBT) (Trevira, Hoechst-Celanese), and poly(ethylene 4-oxyben2oate) [25248-22-0] (A-Tell, Unitika). Other polyester homopolymer fibers available for specialty uses iaclude polyglycoHde [26124-68-5] polypivalolactone [24937-51-7] and polylactide [26100-51-6],... 

Some amino resins are used as additives to modify the properties of other materials. For example, a small amount of amino resin added to textile fabric imparts the familiar wash-and-wear quaUties to shirts and dresses. Automobile tires are strengthened by amino resins which improve the adhesion of mbber to tire cord (qv). A racing sailboat may have a better chance to win because the sails of Dacron polyester have been treated with an amino resin (1). Amino resins can improve the strength of paper even when it is wet. Molding compounds based on amino resins are used for parts of electrical devices, botde and jar caps, molded plastic dinnerware, and buttons. 

Grafts are also frequently employed in the upper part of the body to reconstmct damaged portions of the aorta and carotid arteries. In addition, grafts are used to access the vascular system, such as in hemodialysis to avoid damage of vessels from repeated needle punctures. Most grafts are synthetic and made from materials such as Dacron or Teflon. Less than 5% of grafts utilized are made from biological materials. 

Dacron steel Velon natural mbber paper... 

M. C. Keen and R. J. Thomas, "Absorption Properties of Latyl Disperse Dyes on AppHcation to Dacron Polyester Fibers," Eyes and Chemicals Technical Bulletin, E. I. du Pont de Nemours Co., Inc., Organic Chemicals Dept., Wilmington, Del., 1992. 

The successful development of polyfethylene terephthalate) fibres such as Dacron and Terylene stimulated extensive research into other polymers containing p-phenylene groups in the main chain. This led to not only the now well-established polycarbonates (see Chapter 20) but also to a wide range of other materials. These include the aromatic polyamides (already considered in Chapter 18), the polyphenylene ethers, the polyphenylene sulphides, the polysulphones and a range of linear aromatic polyesters. 

Linear polyesters were studied by Carothers during his classieal researches into the development of the nylons but it was left to Whinfield and Dickson to discover polyfethylene terephthalate) (BP 578079), now of great importance in the manufacture of fibres (e.g. Terylene, Dacron) and films (e.g. Melinex, Mylar). The fibres were first announced in 1941. 

Leaving aside rayon and artificial silks generally, the first really effective polymeric textile fibre was nylon, discovered by the chemist Wallace Hume Carothers (1896-1937) in the Du Pont research laboratories in America in 1935, and first put into production in 1940, just in time to make parachutes for the wartime forces. This was the first of several major commodity polymer fibres and, together with high-density polyethylene introduced about the same time and Terylene , polyethylene tereph-thalate, introduced in 1941 (the American version is Dacron), transformed the place of polymers in the materials pantheon. 

Paraxylene is used to make terephthalic acid, the raw material for manufacturing polyester fibers, such as Dacron, Kodel, Fortrel and Terylene. 

Indicate, if known, preferred bag material that will withstand environment, e.g., fibers of glass, polyester, Teflon , Nomex , polypropylene, polyethylene, cotton, wool, nylon, Orion , Dacron , and Dynel . The type of weave of fiber should be recommended by the manufacturer. The fabrics may be felted or woven [47,48] in weaves of plain, satin, or twill, and should be resistant to any corrosive material in the solid particles or the gas stream. 

---