Crystallinity Subject

Although lubricant base stocks have been subjected to dewaxing processes, they still contain large amounts of paraffins that result in a high pour point for the oil. In the paragraph on the cold behavior of diesel fuels, additives were mentioned that modify the paraffin crystalline system and oppose the precipitation of solids. 

A belief that solid interfaces are easier to understand than liquid ones shifted emphasis to the former but the subjects are not really separable, and the advances in the one are giving impetus to the other. There is increasing interest in films of biological and of liquid crystalline materials because of the importance of thin films in microcircuitry (computer chips ), there has been in recent years a surge of activity in the study of deposited mono- and multilayers. These Langmuir-Blodgett films are discussed in Section XV-7. 

Unlike ion-selective electrodes using glass membranes, crystalline solid-state ion-selective electrodes do not need to be conditioned before use and may be stored dry. The surface of the electrode is subject to poisoning, as described earlier for a Ck ISE in contact with an excessive concentration of Br. When this happens, the electrode can be returned to its original condition by sanding and polishing the crystalline membrane. 

A second degradation process is oxidation, often photo-induced especially by exposure to light not filtered for uv. The radicals resulting from this reaction promote depolymerization of the cellulose, as well as yellowing and fa ding of paper and media. Aging causes paper to become more crystalline and fragile, and this can be exacerbated particularly if the paper is subjected to poor conditions. 

Early applications of crystalline fructose focused on foods for special dietary applications, primarily calorie reduction and diabetes control. The latter application sought to capitalize on a signiftcandy lower serum glucose level and insulin response in subjects with noninsulin-dependent diabetes melUtus (21,22) and insulin-dependent diabetes (23). However, because fmctose is a nutritive sweetener and because dietary fmctose conversion to glucose in the hver requires insulin in the same way as dietary glucose or sucrose, recommendations for its use are the same as for other nutritive sugars (24). Review of the health effects of dietary fmctose is available (25). 

Methods (25,26) to iacrease the ratio of the desired a-isomer (1) versus the unsweet -isomer [22839-61-8] (3) exist and are proprietary. The isomers can be separated by subjecting the solution of the final step to hydrochloric acid. The desired a-isomer hydrochloride salt crystallines out of the solution the P-isomer remains. There are many patented synthetic processes. The large-scale synthesis of aspartame has been discussed (27—47). 

Drying of the poly(vinyl alcohol) is critical to both the color and solubiHty of the final product. Excessive drying temperatures result in high product color and an increase in the crystallinity, which in turn reduces the solubiHty of the product. Drying is initially subjected to a flash regime, where the solvent not contained within the particles is flashed off. This first phase is foUowed by a period where the rate is controUed by the diffusion rate of solvent from the poly(vinyl alcohol) particles. Because the diffusion rate falls as the material dries, complete drying is not practical. The polymer is therefore generally sold at a specification of 95% soHds. 

Properties and Reactions. Amine boranes are usually colodess, crystalline compounds, which exhibit sharp melting points and thermal stability when pure. Primary and secondary amine boranes are generally soHds at ambient temperatures. With the exception of trimetbylamine borane, the ahphatic /-amine boranes are Hquids. The nature of the bonding in amine boranes has been the subject of theoretical investigations (21—23). 

The melt-spinning process used to convert mesophase pitch into fiber form is similar to that employed for many thermoplastic polymers. Normally, an extruder melts the pitch and pumps it into the spin pack. Typically, the molten pitch is filtered before being extruded through a multi-holed spinnerette. The pitch is subjected to high extensional and shear stresses as it approaches and flows through the spinnerette capillaries. The associated torques tend to orient the liquid crystalline pitch in a regular transverse pattern. Upon emerging from the... 

The work on colour centres outlined in Section 3.2.3.1, much of it in the 1930s, and its consequences for understanding electrically charged defects in insulating and semiconducting crystalline materials, helped to stimulate ceramic researches in the electrical/electronic industry. The subject is enormous and here there is space only for a cursory outline of what has happened, most of it in the last 80 years. 

Liquid crystal polymers (LCP) are a recent arrival on the plastics materials scene. They have outstanding dimensional stability, high strength, stiffness, toughness and chemical resistance all combined with ease of processing. LCPs are based on thermoplastic aromatic polyesters and they have a highly ordered structure even in the molten state. When these materials are subjected to stress the molecular chains slide over one another but the ordered structure is retained. It is the retention of the highly crystalline structure which imparts the exceptional properties to LCPs. 

---