CRT monitors

Monitors. Cathode ray tube (CRT) monitors ate a key element of electronic prepress systems, providing an electronic canvas for the operator. They may also be used to judge general adequacy of color in a process called soft proofing. 

Sometimes it is desirable to turn off a seetion of the produet but leave other portions operating. This is typieally the ease in laptop eomputers for power savings or eonsumer applianee applieations, sueh as CRT monitors, televisions, and stereo equipment. 

For the central measurement, the field of view is rectangular (e.g., 0.3 by 1.25°) and for other eccentricities, the field is an annular arc similar to that provided in minimum motion photometry. The use of a CRT monitor introduces the same problem as the use of LEDs in HFP, namely, the broadband nature of the screen phosphors, and a correction must be made before reporting the peak MP optical density. A system that could employ lamps and filters instead of a CRT monitor would be difficult to design because of the complexity of the visual stimulus. 

The emission of a complete set of personal computers and monitors are described by Nakagawa et al. (2003). Several VOC like benzene, toluene, etc. were identified and quantified. The results are shown in Table 17.3. The emission rates of aliphatic hydrocarbons, terpenes, esters, ketones, alcohols and halogens were not found to be significantly different for PCs with CRT and TFT monitors. In the case of aromatic hydrocarbons the emission rates were higher if a PC with CRT monitor was used. The same was found for aldehyde emissions but the differences in emission rates were lower. The separate test CRT monitor and the associated computer in this study proved that the monitor was the main source of chemical emissions. 

When the commercial OMA (Model 1205, Princeton Applied Research Corporation, Princeton, NJ) became available, we recognized its potential as a replacement for the photomultiplier detector. The vidicon detector surface was divided into 500 channels, the image could be seen on a cathode ray tube (CRT) monitor in real time, the intensity profile was available in digital form, the profile could be time-averaged for any desired number of video scans, and the final profile was stored in internal memory for transfer to an external output device. Not only had a considerable amount of work gone into its development and the verification of performance, but its potential for use for a variety of physical techniques would ensure the construction of enough units to support further development of the system. Moreover the need for low-light-level detectors for other purposes would lead to further improvements in detector devices. 

LCD monitors are superior to CRT monitors for image display. Explain why. 

We have already addressed CRT s for television, including color, black white and color projection systems. Color display CRTs are used primarily as computer monitors. Here, the same rare earth phosphors are used as for color TV. Monochrome displays refers to CRT monitors where only one color screen is used for special purposes, as described in the last chapter. The following is a repeat of 6.6.6. given in the last chapter ... 

Mains voltages are now appearing in certain special feature telephones (for example, in those which incorporate CRT monitors) and in these cases flame retardant grades are specified. 

All these equipments are located in the main console to reduce the work-load to the operator. This became possible since the introduction of CRT monitors, > 4iich enables to display huge amounts of information in one rack of the console. The layout of the console depends on the specific operational requirements and the design, size and characteristics of the instrumentation and controls used. 

The main console is based on a modular design and consists of nine console racks, forming a continuous and comfortable workplace. Each console rack, on its top surface include indicator panels or CRT monitors for information presentation, plus custom command panels for dedicated keyboards, push-button groups, track-balls and communication/command equipment sets. Internally, room, connections and anchoring points are available for cabinets, such as supervision computers, electronic... 

---