Corrosion technicians

NACE Basic Corrosion Course 5 Persons passing this course exam, who have 2 years of experience, may appiy to become a certified NACE Corrosion Technician. 

If the vessel is not insulated or does not have a liner, the wall thickness may be tested from either the outside or from within using a D-Meter. This tool can quickly and easily measure the thickness of piping or a vessel wall, D-Meters are generally the inspector s favorite tool. The name D-Meter is the technician s lingo for the simple handheld digital ultrasonic thickness meter. Often corrosion patterns on vessels and equipment are... 

There are more examples for the application of these requirements If a study involves analytical procedures, the facility has to have an adequate power supply with adequate provisions for the case of power failures or breakdowns. The same provisions have to be taken for the air-conditioning system of the animal rooms. It is self-evident that the IT system of a test facility will have to be protected against this kind of event, too. Furthermore, an adequate ventilation system will be needed in order to protect test systems, equipment and technicians from noxious or corrosive gases and volatile solvents. In the area of in vitro test systems, a surveillance system for the facilities (i.e. the containers) used to store cell lines in a deep-frozen stage will have to assure that the level of liquid nitrogen does not fall below the critical minimal level. Many more examples could be cited and the appropriateness of the facility and its construction can be followed down to the small table on which the balance to be used in the study is placed Does this table have sturdy legs and a special. 

This book covers a wide spectrum of corrosion topics with rich illustrations, an easy to understand writing style, and the presentation of review articles, providing state-of-the-art corrosion-mitigation techniques useful for practicing engineers, technologists, and field technicians. It also provides a basic understanding of corrosion mechanisms, which will be equally beneficial to people who are not directly involved in the corrosion field to assist them in their related tasks. Based on its content and presentation of scientific and technical issues, this... 

Corrosion will occur and can be controlled. It is therefore essential that engineering technicians are aware of the causes of corrosion and of the methods available for its control. 

Meanwhile, police officers find, on the upwind side of the stadium in the parking lot, three 5-gallon LPG (liquid propane gas) tanks with hluish corrosion on their brass valves. The containers are X-rayed by the bomb squad. It is determined that they are empty and contain no explosives. Tests by hazardous materials technicians note no toxic materials other than low levels of ammonia. 

Technicians at Wright-Patterson Air Force Base in Ohio think this could lead to a whole new way to detect corrosion. William Mullins says, You could walk down the vehicle and see there s a pink spot. This method would be especially good at detecting corrosion concealed around rivets and where metals overlap. The only limitation appears to be that the coating must be clear. 

In 1921 Electrochemistry was taught for the first time to the Chemical Technicians and Metallurgists. The professional studies in Metallurgical Chemistry were opened in 1967. Electrochemistry, Corrosion, and Metal Protection are included, the latter subject as an elective. During this year, Electrochemistry was included in the Chemistry program. 

The most crucial aspect of the above definition of the objective, which must remain foremost in the technician s mind at aU times, is the specific well-defined purpose." Corrosion inhibition is no longer an academic endeavor. Rather, the focus must be on prolonging the useful life of a metallic structure in the realistic (or relevant) environment at an acceptable cost advantage. The design engineer in general has three options ... 

Sensor robustness quality control Corrosion can cause overt failure of a process transmitter. Sudden overpressure in differential pressure transmitter can cause zero drift. Similarly, instmmentation practice is important, for example, if technician ignores the important role of equalizing valve, then sudden pressure may come on either side of a differential pressure transmitter causing damage (when without opening equalizing valve, either side valve is closed or opened suddenly). The last issue is related to maintenance practices. To circumvent these issues, robust sensors may be deployed. 

Steam is highly corrosive and wears out valves, seals, and other autoclave parts. Because of this problem, it is important to conduct a thorough inspection by a qualified technician at least once a year. 

Mobley, R. K., L. R. Higgins, and D. J. Wickoff, eds. 2008. Maintenance Engineering Handbook, 7th ed. New York McGraw-Hill. This useful reference tool for engineers and technicians performing maintenance covers organization of maintenance, computer applications in maintenance, costs and control, plant, mechanical equipment and electrical equipment maintenance, instrumentation and reliability, lubrication, welding, and corrosion. 

---