Copper-catalyzed reactions cyclopropanation

Furan and thiophene undergo addition reactions with carbenes. Thus cyclopropane derivatives are obtained from these heterocycles on copper(I) bromide-catalyzed reaction with diazomethane and light-promoted reaction with diazoacetic acid ester (Scheme 41). The copper-catalyzed reaction of pyrrole with diazoacetic acid ester, however, gives a 2-substituted product (Scheme 42). 

Whereas metal-catalyzed decomposition of simple diazoketones in the presence of ketene acetals yields dihydrofurans 121,124,134), cyclopropanes usually result from reaction with enol ethers, enol acetates and silyl enol ethers, just as with unactivated alkenes 13). l-Acyl-2-alkoxycyclopropanes were thus obtained by copper-catalyzed reactions between diazoacetone and enol ethers 79 105,135), enol acetates 79,135 and... 

The reaction of carbenoids with aromatic systems was first reported by Buchner and coworkers in the 1890s.6 The reaction offers a direct entry to cycloheptatrienes and has been used to synthesize tropones, tropolones and azulenes.6 Neither the thermal nor copper-catalyzed reactions, however, proceed in good yield. The problems associated with these transformations were clearly demonstrated in a recent reexamination of die thermal decomposition of ethyl diazoacetate in excess anisole (137).129 A careful analysis of the reaction mixture revealed the presence of seven components (138-144) in 34% overall yield (Scheme 29). The cycloheptatrienes (138M142) were considered to be formed by cyclopropanation followed by electrocyclic ring opening of the resulting norcaradienes. A mixture of products arose because the cyclopropanation was not regioselective and, also, the initially formed cycloheptatrienes were labile under the reaction conditions. 

The use of chiral additives with a rhodium complex also leads to cyclopropanes enantioselectively. An important chiral rhodium species is Rh2(5-DOSP)4, which leads to cyclopropanes with excellent enantioselectivity in carbene cyclopro-panation reactions. Asymmetric, intramolecular cyclopropanation reactions have been reported. The copper catalyzed diazoester cyclopropanation was reported in an ionic liquid. ° It is noted that the reaction of a diazoester with a chiral dirhodium catalyst leads to p-lactones with modest enantioselectivity Phosphonate esters have been incorporated into the diazo compound... 

Like BINOL, salicylaldehyde imines have become very important in asymmetric catalysis and a variety of polydentate ligands prepared from chiral monoamines and diamines are employed in oxidation reactions, carbenoid reactions and Lewis acid catalyzed reactions. As in the previous section, this section emphasizes the effect of the phenol moiety on the asymmetric catalysis. An imine derived from a chiral 1-phenethylamine and salicylaldehyde was employed in the copper catalyzed asymmetric cyclopropanation by Nozaki, Noyori and coworkers in 1966, which is the first example of the asymmetric catalysis in a homogeneous system . Salicylaldehyde imines with ethylenediamine (salen) have been studied extensively by Jacobsen and Katsuki and their coworkers since 1990 in asymmetric catalysis. Jacobsen and coworkers employed the ligands prepared from chiral 1,2-diamines and Katsuki and coworkers sophisticated ligands possess chirality not only at the diamine moiety but also at the 3,3 -positions. 

In rhodium-catalyzed reactions, a higher tendency for cyclopropanation than for ylide formation is observed compared with copper-catalyzed reactions. 

Aryl-5,5-bis(oxazolin-2-yl)-l,3-dioxanes 169 have been easily prepared in three steps from diethyl bis(hydroxymethyl)malonate, amino alcohols, and aromatic aldehydes. They have been used for the copper-catalyzed asymmetric cyclopropanation of styrene with ethyl diazoacetate in up to 99% ee for the trawx-cyclopropane (maximum transicis ratio = 77/23) <05TA1415>. The same reaction performed on 2,5-dimethyl-2,4-hexadiene with tert-butyl diazoacetate in the presence of copper catalysts bearing ligand 170, prepared from arylglycines, exhibited remarkable enhancement of the rrawx-selectivity (transicis ratio = 87/13), with 96% ee for the trans product <05JOC3292>. 

Rhodium-catalyzed reactions Copper-catalyzed reactions Ruthenium-catalyzed reactions Cobalt- and iron-catalyzed reactions Other transition metal-catalyzed reactions Cyclopropanation without transition metal catalysts Cyclopropanation of dihalocarbenes... 

The majority of preparative methods which have been used for obtaining cyclopropane derivatives involve carbene addition to an olefmic bond, if acetylenes are used in the reaction, cyclopropenes are obtained. Heteroatom-substituted or vinyl cydopropanes come from alkenyl bromides or enol acetates (A. de Meijere, 1979 E. J. Corey, 1975 B E. Wenkert, 1970 A). The carbenes needed for cyclopropane syntheses can be obtained in situ by a-elimination of hydrogen halides with strong bases (R. Kdstcr, 1971 E.J. Corey, 1975 B), by copper catalyzed decomposition of diazo compounds (E. Wenkert, 1970 A S.D. Burke, 1979 N.J. Turro, 1966), or by reductive elimination of iodine from gem-diiodides (J. Nishimura, 1969 D. Wen-disch, 1971 J.M. Denis, 1972 H.E. Simmons, 1973 C. Girard, 1974),... 

Muller et al. have also examined the enantioselectivity and the stereochemical course of copper-catalyzed intramolecular CH insertions of phenyl-iodonium ylides [34]. The decomposition of diazo compounds in the presence of transition metals leads to typical reactions for metal-carbenoid intermediates, such as cyclopropanations, insertions into X - H bonds, and formation of ylides with heteroatoms that have available lone pairs. Since diazo compounds are potentially explosive, toxic, and carcinogenic, the number of industrial applications is limited. Phenyliodonium ylides are potential substitutes for diazo compounds in metal-carbenoid reactions. Their photochemical, thermal, and transition-metal-catalyzed decompositions exhibit some similarities to those of diazo compounds. 

Pyridine-based N-containing ligands have been tested in order to extend the scope of the copper-catalyzed cyclopropanation reaction of olefins. Chelucci et al. [33] have carefully examined and reviewed [34] the efficiency of a number of chiral pyridine derivatives as bidentate Hgands (mainly 2,2 -bipyridines, 2,2 6, 2 -terpyridines, phenanthrolines and aminopyridine) in the copper-catalyzed cyclopropanation of styrene by ethyl diazoacetate. The corresponding copper complexes proved to be only moderately active and enantios-elective (ee up to 32% for a C2-symmetric bipyridine). The same authors prepared other chiral ligands with nitrogen donors such as 2,2 -bipyridines 21, 5,6-dihydro-1,10-phenanthrolines 22, and 1,10-phenanthrolines 23 (see Scheme 14) [35]. 

Metal-Catalyzed. Cyclopropanation. Carbene addition reactions can be catalyzed by several transition metal complexes. Most of the synthetic work has been done using copper or rhodium complexes and we focus on these. The copper-catalyzed decomposition of diazo compounds is a useful reaction for formation of substituted cyclopropanes.188 The reaction has been carried out with several copper salts,189 and both Cu(I) and Cu(II) triflate are useful.190 Several Cu(II)salen complexes, such as the (V-f-butyl derivative, which is called Cu(TBS)2, have become popular catalysts.191... 

Copper(II) triflate has also been used for the carbenoid cyclopropanation reaction of simple olefins like cyclohexene, 2-methylpropene, cis- or rran.y-2-butene and norbomene with vinyldiazomethane 2 26,27). Although the yields were low (20-38 %), this catalyst is far superior to other copper salts and chelates except for copper(II) hexafluoroacetylaeetonate [Cu(hfacac)2], which exhibits similar efficiency. However, highly nucleophilic vinyl ethers, such as dihydropyran and dihydrofuran cannot be cyclopropanated as they rapidly polymerize on contact with Cu(OTf)2. With these substrates, copper(II) trifluoroacetate or copper(II) hexafluoroacetylaeetonate have to be used. The vinylcyclopropanation is stereospecific with cis- and rra s-2-butene. The 7-vinylbicyclo[4.1.0]heptanes formed from cyclohexene are obtained with the same exo/endo ratio in both the Cu(OTf)2 and Cu(hfacac)2 catalyzed reaction. The... 

Cu(OTf)2 generally gives yields intermediate between those of the other two catalysts, but with a closer resemblance to rhodium. In competition experiments, the better coordinating norbomene is preferred over styrene, just as in the case with Pd(OAc)2. Cu(acac)2, however, parallels Rh2(OAc)4 in its preference for styrene. These findings illustrate the variability of copper-promoted cyclopropanations, and it was suggested that in the Cu(OTf)2-catalyzed reactions of diazoesters, basic by-products, which are formed as the reaction proceeds, may gradually suppress... 

Diverging results have been reported for the carbenoid reaction between alkyl diazoacetates and silyl enol ethers 49a-c. Whereas Reissig and coworkers 60) observed successful cyclopropanation with methyl diazoacetate/Cu(acac)2, Le Goaller and Pierre, in a note without experimental details u8), reported the isolation of 4-oxo-carboxylic esters for the copper-catalyzed decomposition of ethyl diazoacetate. According to this communication, both cyclopropane and ring-opened y-keto ester are obtained from 49 c but the cyclopropane suffers ring-opening under the reaction conditions. 

As it is known from experience that the metal carbenes operating in most catalyzed reactions of diazo compounds are electrophilic species, it comes as no surprise that only a few examples of efficient catalyzed cyclopropanation of electron-poor alkeiies exist. One of those examples is the copper-catalyzed cyclopropanation of methyl vinyl ketone with ethyl diazoacetate 140), contrasting with the 2-pyrazoline formation in the purely thermal reaction (for failures to obtain cyclopropanes by copper-catalyzed decomposition of diazoesters, see Table VIII in Ref. 6). 

Products of a so-called vinylogous Wolff rearrangement (see Sect. 9) rather than products of intramolecular cyclopropanation are generally obtained from P,y-unsaturated diazoketones I93), the formation of tricyclo[2,1.0.02 5]pentan-3-ones from 2-diazo-l-(cyclopropene-3-yl)-l-ethanones being a notable exception (see Table 10 and reference 12)). The use of Cu(OTf), does not change this situation for diazoketone 185 in the presence of an alcoholl93). With Cu(OTf)2 in nitromethane, on the other hand, A3-hydrinden-2-one 186 is formed 160). As 186 also results from the BF3 Et20-catalyzed reaction in similar yield, proton catalysis in the Cu(OTf)2-catalyzed reaction cannot be excluded, but electrophilic attack of the metal carbene on the double bond (Scheme 26) is also possible. That Rh2(OAc)4 is less efficient for the production of 186, would support the latter explanation, as the rhodium carbenes rank as less electrophilic than copper carbenes. 

The view has been expressed that a primarily formed ylide may be responsible for both the insertion and the cyclopropanation products 230 246,249). In fact, ylide 263 rearranges intramolecularly to the 2-thienylmalonate at the temperature applied for the Cul P(OEt)3 catalyzed reaction between thiophene and the diazomalonic ester 250) this readily accounts for the different outcome of the latter reaction and the Rh2(OAc)4-catalyzed reaction at room temperature. Alternatively, it was found that 2,5-dichlorothiophenium bis(methoxycarbonyl)methanide, in the presence of copper or rhodium catalysts, undergoes typical carben(oid) reactions intermole-cularly 251,252) whether this has any bearing on the formation of 262 or 265, is not known, however. 

Aziridines have been synthesized, albeit in low yield, by copper-catalyzed decomposition of ethyl diazoacetate in the presence of an inline 260). It seems that such a carbenoid cyclopropanation reaction has not been realized with other diazo compounds. The recently described preparation of 1,2,3-trisubstituted aziridines by reaction of phenyldiazomethane with N-alkyl aldimines or ketimines in the presence of zinc iodide 261 > most certainly does not proceed through carbenoid intermediates rather, the metal salt serves to activate the imine to nucleophilic attack from the diazo carbon. Replacement of Znl2 by one of the traditional copper catalysts resulted in formation of imidazoline derivatives via an intermediate azomethine ylide261). 

Intramolecular oxonium ylide formation is assumed to initialize the copper-catalyzed transformation of a, (3-epoxy diazomethyl ketones 341 to olefins 342 in the presence of an alcohol 333 . The reaction may be described as an intramolecular oxygen transfer from the epoxide ring to the carbenoid carbon atom, yielding a p,y-unsaturated a-ketoaldehyde which is then acetalized. A detailed reaction mechanism has been proposed. In some cases, the oxonium-ylide pathway gives rise to additional products when the reaction is catalyzed by copper powder. If, on the other hand, diazoketones of type 341 are heated in the presence of olefins (e.g. styrene, cyclohexene, cyclopen-tene, but not isopropenyl acetate or 2,3-dimethyl-2-butene) and palladium(II) acetate, intermolecular cyclopropanation rather than oxonium ylide derived chemistry takes place 334 ). 

Chapter 2 to 6 have introduced a variety of reactions such as asymmetric C-C bond formations (Chapters 2, 3, and 5), asymmetric oxidation reactions (Chapter 4), and asymmetric reduction reactions (Chapter 6). Such asymmetric reactions have been applied in several industrial processes, such as the asymmetric synthesis of l-DOPA, a drug for the treatment of Parkinson s disease, via Rh(DIPAMP)-catalyzed hydrogenation (Monsanto) the asymmetric synthesis of the cyclopropane component of cilastatin using a copper complex-catalyzed asymmetric cyclopropanation reaction (Sumitomo) and the industrial synthesis of menthol and citronellal through asymmetric isomerization of enamines and asymmetric hydrogenation reactions (Takasago). Now, the side chain of taxol can also be synthesized by several asymmetric approaches. 

The use of chiral copper complexes in asymmetric synthesis was inaugurated in 1966 when the first homogeneous asymmetric metal-catalyzed reaction was reported a copper catalyzed cyclopropanation (2). At the end of 1999, more than 25 distinct reactions were reported wherein the use of a chiral copper complex had induced an enantioselective transformation. The field grew quickly and the best is most likely yet to come. 

The development of this reaction over the subsequent 50 years placed it, along with the Rh(II) variant, as the method of choice for the catalytic cyclopropanation of alkenes. A number of reviews have recently appeared detailing the advances in cyclopropanation (5-10). This reaction remains one of the most recognizable copper-catalyzed asymmetric transformations as evidenced by the plethora of publications utilizing it as a testing ground for new ligands. 

The success of bis(oxazolines) (43) in the copper-catalyzed cyclopropanation reaction has prompted numerous researchers to modify these structures in an attempt to improve the catalysts. To date, none have approached the success and generality exhibited by /erf-butyl bis(oxazoline) (55c) although some afford improved selectivities in specific cases. As a corollary to its success in this reaction, the copper-catalyzed cyclopropanation has taken on the aspects of a testing ground for new bis(oxazoline)-based ligands. The plethora of publications in this area will be summarily condensed in the rest of this section, and emphasis will be placed only on those ligands that provide improvements over 55c and those publications that deal with structural or mechanistic advances. 

Other oxazoline containing ligands have been reported for the copper-catalyzed cyclopropanation reaction. These are outlined in Scheme 5 where the reaction of ethyl diazoacetate and styrene is compared. Conditions are more or less standard (halogenated solvent, 0°C to ambient temperature, CuOTf without reduction). For more information on these ligands, the reader is referred to the primary publications (49-54). 

---