Catalysts conjugated dienes

The enone 807 is converted into the dienol triflatc 808 and then the conjugated diene 809 by the hydrogenolysis with tributylammonium for-mate[689,690]. Naphthol can be converted into naphthalene by the hydrogenolysis of its triflate 810[691-693] or sulfonates using dppp or dppf as a ligand[694]. Aryl tetrazoyl ether 811 is cleaved with formic acid using Pd on carbon as a catalyst[695]. 

When allylic compounds are treated with Pd(0) catalyst in the absence of any nucleophile, 1,4-elimination is a sole reaction path, as shown by 492, and conjugated dienes are formed as a mixture of E and Z isomers[329]. From terminal allylic compounds, terminal conjugated dienes are formed. The reaction has been applied to the syntheses of a pheromone, 12-acetoxy-1,3-dode-cadiene (493)[330], ambergris fragrance[331], and aklavinone[332]. Selective elimination of the acetate of the cyanohydrin 494 derived from 2-nonenal is a key reaction for the formation of the 1,3-diene unit in pellitorine (495)[333], Facile aromatization occurs by bis-elimination of the l,4-diacetoxy-2-cyclohex-ene 496[334],... 

Pd-cataly2ed reactions of butadiene are different from those catalyzed by other transition metal complexes. Unlike Ni(0) catalysts, neither the well known cyclodimerization nor cyclotrimerization to form COD or CDT[1,2] takes place with Pd(0) catalysts. Pd(0) complexes catalyze two important reactions of conjugated dienes[3,4]. The first type is linear dimerization. The most characteristic and useful reaction of butadiene catalyzed by Pd(0) is dimerization with incorporation of nucleophiles. The bis-rr-allylpalladium complex 3 is believed to be an intermediate of 1,3,7-octatriene (7j and telomers 5 and 6[5,6]. The complex 3 is the resonance form of 2,5-divinylpalladacyclopentane (1) and pallada-3,7-cyclononadiene (2) formed by the oxidative cyclization of butadiene. The second reaction characteristic of Pd is the co-cyclization of butadiene with C = 0 bonds of aldehydes[7-9] and CO jlO] and C = N bonds of Schiff bases[ll] and isocyanate[12] to form the six-membered heterocyclic compounds 9 with two vinyl groups. The cyclization is explained by the insertion of these unsaturated bonds into the complex 1 to generate 8 and its reductive elimination to give 9. 

Hydroboration of conjugated dienes proceeds without a catalyst to give 1,2-adducts. However, the less reactive catecholborane reacts with isoprene with catalysis by Pd(PhiP)4, yielding the 1,4-adduct 73[66]. 

Unstrained difluorotetramethyldisilane (84) gives the 1 1 adduct 85 as the main product and the 1 2 adduct 86 as a minor product[78,79]. On the other hand, the dimerization and double silylation of conjugated dienes with (Me3Si)2 catalyzed by PdCl2(PhCN)2 take place at 90" C[80]. Pd(dba)2 without phosphine is an active catalyst for the reaction, which proceeds in DMF to give 87 at room temperature[81], A five-membered ring is formed by the application of the reaction to the di-(2,4-pentadienyl)malonate (69)[82]. 

The conjugated diene 1 3 butadiene is used m the manufacture of synthetic rubber and IS prepared on an industrial scale m vast quantities Production m the United States is currently 4 X 10 Ib/year One industrial process is similar to that used for the prepara tion of ethylene In the presence of a suitable catalyst butane undergoes thermal dehy drogenation to yield 1 3 butadiene... 

Metal salts of neodecanoic acid have also been used as catalysts in the preparation of polymers. For example, bismuth, calcium, barium, and 2kconium neodecanoates have been used as catalysts in the formation of polyurethane elastomers (91,92). Magnesium neodecanoate [57453-97-1] is one component of a catalyst system for the preparation of polyolefins (93) vanadium, cobalt, copper, or kon neodecanoates have been used as curing catalysts for conjugated-diene butyl elastomers (94). 

The discovery by Ziegler that ethylene and propylene can be polymerized with transition-metal salts reduced with trialkyl aluminum gave impetus to investigations of the polymerization of conjugated dienes (7—9). In 1955, synthetic polyisoprene (90—97% tij -l,4) was prepared using two new catalysts. A transition-metal catalyst was developed at B. E. Goodrich (10) and an alkaU metal catalyst was developed at the Ekestone Tke Rubber Co. (11). Both catalysts were used to prepare tij -l,4-polyisoprene on a commercial scale (9—19). 

The catalytic enantioselective cycloaddition reaction of carbonyl compounds with conjugated dienes has been in intensive development in recent years with the main focus on synthetic aspects the number of mechanistic studies has been limited. This chapter will focus on the development and understanding of cycloaddition reactions of carbonyl compounds with chiral Lewis acid catalysts for the preparation of optically active six-membered ring systems. 

Danishefsky et al. were probably the first to observe that lanthanide complexes can catalyze the cycloaddition reaction of aldehydes with activated dienes [24]. The reaction of benzaldehyde la with activated conjugated dienes such as 2d was found to be catalyzed by Eu(hfc)3 16 giving up to 58% ee (Scheme 4.16). The ee of the cycloaddition products for other substrates was in the range 20-40% with 1 mol% loading of 16. Catalyst 16 has also been used for diastereoselective cycloaddition reactions using chiral 0-menthoxy-activated dienes derived from (-)-menthol, giving up to 84% de [24b,c] it has also been used for the synthesis of optically pure saccharides. 

The major developments of catalytic enantioselective cycloaddition reactions of carbonyl compounds with conjugated dienes have been presented. A variety of chiral catalysts is available for the different types of carbonyl compound. For unactivated aldehydes chiral catalysts such as BINOL-aluminum(III), BINOL-tita-nium(IV), acyloxylborane(III), and tridentate Schiff base chromium(III) complexes can catalyze highly diastereo- and enantioselective cycloaddition reactions. The mechanism of these reactions can be a stepwise pathway via a Mukaiyama aldol intermediate or a concerted mechanism. For a-dicarbonyl compounds, which can coordinate to the chiral catalyst in a bidentate fashion, the chiral BOX-copper(II)... 

Conjugated dienes can be epoxidized to provide vinylepoxides. Cyclic substrates react with Katsuki s catalyst to give vinylepoxides with high ees and moderate yields [17], whereas Jacobsen s catalyst gives good yields but moderate enantiose-lectivities [18]. Acyclic substrates were found to isomerize upon epoxidation (Z, )-conjugated dienes reacted selectively at the (Z)-alkene to give trans-vinylepoxides (Scheme 9.4a) [19]. This feature was utilized in the formal synthesis of leuko-triene A4 methyl ester (Scheme 9.4b) [19]. 

Conjugated dienes can add hydrogen by 1,2 or 1,4 addition. Selective 1,4 addition can be achieved by hydrogenation in the presence of carbon monoxide, with bis(cyclopentadienyl)chromium as catalyst. With allenes catalytic hydrogenation usually reduces both double bonds. 

The addition of allcenes to alkenes can also be accomplished by bases as well as by the use of catalyst systems consisting of nickel complexes and alkylaluminum compounds (known as Ziegler catalysts), rhodium catalysts, and other transition metal catalysts, including iron. These and similar catalysts also catalyze the 1,4 addition of alkenes to conjugated dienes, for example. 

The groups R2N and Cl can be added directly to alkenes, allenes, conjugated dienes, and alkynes, by treatment with dialkyl-V-chloroamines and acids. " These are free-radical additions, with initial attack by the R2NH- radical ion. " N-Halo amides (RCONHX) add RCONH and X to double bonds under the influence of UV light or chromous chloride. " Amines add to allenes in the presence of a palladium catalyst. ... 

Conjugated dienes can be dimerized or trimerized at their 1,4 positions (formally, [4 4- 4] and [4 4-4 4-4] cycloadditions) by treatment with certain complexes or other transition metal compounds. " Thus butadiene gives 1,5-cyclooctadiene and 1,5,9-cyclododecatriene. " The relative amount of each product can be controlled by use of the proper catalyst. For example, Ni P(OC6H4—o-Ph)3 gives predominant dimerization, while Ni(cyclooctadiene)2 gives mostly trimerization. The products arise, not by direct 1,4 to 1,4 attack, but by stepwise mechanisms involving metal-alkene complexes. " ... 

The use of chiral bis(oxazoline) copper catalysts has also been often reported as an efficient and economic way to perform asymmetric hetero-Diels-Alder reactions of carbonyl compounds and imines with conjugated dienes [81], with the main focus on the application of this methodology towards the preparation of biologically valuable synthons [82]. Only some representative examples are listed below. For example, the copper complex 54 (Scheme 26) has been successfully involved in the catalytic hetero Diels-Alder reaction of a substituted cyclohexadiene with ethyl glyoxylate [83], a key step in the total synthesis of (i )-dihydroactinidiolide (Scheme 30). 

In the presence of the corresponding copper(II) catalyst, N-acryloyloxazo-lidinone reacted with various conjugated dienes (cyclic and acychc) with good enantioselectivities in all cases, competing with results obtained for classical catalysts in the case of flexible dienes. Thus the cycloadducts obtained from isoprene or 2,3-dimethyl-1,3-butadiene were synthesized in high yields and good enantioselectivities (92% ee in both cases). 

The chemo- and regioselectivities of hydroformylation reactions of open chain, conjugated dienes using the usual catalyst are, in most cases, rather low [36]. The rhodium/ mesitylene co-condensate (catalyst A), in the presence of bis(diphenylphosphino)ethane, DPPE, catalyses the hydroformylation of 1,3-butadiene, isoprene, and E,Z)-, 3-pentadiene to the corresponding p,y-unsaturated monoaldehydes, with unusually high chemo- and regioselectivities (Scheme 17). 

Table 5. Hydroformylation of open-chain conjugated dienes by rhodium/mesitylene co-condensate, catalyst A . Substrate...

Bis(diamino)alanes (R2N)2A1H were used for the hydroalumination of terminal and internal alkenes [18, 19]. TiCb and CpjTiCb are suitable catalysts for these reactions, whereas CpjZrCb exhibits low catalytic activity. The hydroaluminations are carried out in benzene or THF soluhon at elevated temperatures (60°C). Internal linear cis- and trans-alkenes are converted into n-alkylalanes via an isomerization process. Cycloalkenes give only moderate yields tri- and tetrasubstituted double bonds are inert. Hydroaluminahon of conjugated dienes like butadiene and 1,3-hexa-diene proceeds with only poor selechvity. The structure of the hydroaluminahon product of 1,5-hexadiene depends on the solvent used. While in benzene cyclization is observed, the reaction carried out in THF yields linear products (Scheme 2-10). 

Conjugated dienes are among the most significant building blocks both in laboratories and in the chemical industry [1], Especially, 1,3-butadiene and isoprene are key feedstocks for the manufacture of polymers and fine chemicals. Since the discovery of the Ziegler-Natta catalyst for the polymerizations of ethylene and propylene, the powerful features of transition metal catalysis has been widely recognized, and studies in this field have been pursued very actively [2-7]. 

---