Insertion Reactions conjugated diene

Figure E shows some conjugated diene insertion reactions. As expected, these compounds react similarly to the olefins—the same reagents add. Manganese...

In the Pd(0)-catalyzed transformation of conjugated dienes the reaction is initiated by an oxidative addition to the Pd(0) catalyst. Typically, an organohalide RX or a pronucleophile HX reacts with Pd(0) to give RPdX or HPdX, respectively. These species will react with the conjugated diene throngh an insertion of one of the double bonds of the diene into the R—Pd or H—Pd bond, respectively, which results in the formation of a tt-allylpalladium complex (Scheme 1). 

In Grignard reactions, Mg(0) metal reacts with organic halides of. sp carbons (alkyl halides) more easily than halides of sp carbons (aryl and alkenyl halides). On the other hand. Pd(0) complexes react more easily with halides of carbons. In other words, alkenyl and aryl halides undergo facile oxidative additions to Pd(0) to form complexes 1 which have a Pd—C tr-bond as an initial step. Then mainly two transformations of these intermediate complexes are possible insertion and transmetallation. Unsaturated compounds such as alkenes. conjugated dienes, alkynes, and CO insert into the Pd—C bond. The final step of the reactions is reductive elimination or elimination of /J-hydro-gen. At the same time, the Pd(0) catalytic species is regenerated to start a new catalytic cycle. The transmetallation takes place with organometallic compounds of Li, Mg, Zn, B, Al, Sn, Si, Hg, etc., and the reaction terminates by reductive elimination. 

I.l.IJ Reactions nitlr 1,2-, 1.3-. ami 1.4-dienes. The reaction of conjugated dienes with aryl and alkenyl halides can be explained by the following mechanism. Insertion of a conjugated 1.3-diene into an aryl or alkenylpalladium bond gives the T-allvlpalladium complex 243 as an intermediate, which reacts further... 

Diphenylketene (253) reacts with allyl carbonate or acetate to give the a-allylated ester 255 at 0 °C in DMF, The reaction proceeds via the intermediate 254 formed by the insertion of the C = C bond of the ketene into 7r-allylpalla-dium, followed by reductive elimination. Depending on the reaction conditions, the decarbonylation and elimination of h-hydrogen take place in benzene at 25 °C to afford the conjugated diene 256(155]. 

The intramolecular insertion of a conjugated diene into 7r-allylpalladium, initially formed in 789, generates another rr-allyl complex 790, which is trapped with acetate anion to give a new allylic acetate 791. No further reaction of the allylic acetate with alkene takes place[489]. 

Pd-cataly2ed reactions of butadiene are different from those catalyzed by other transition metal complexes. Unlike Ni(0) catalysts, neither the well known cyclodimerization nor cyclotrimerization to form COD or CDT[1,2] takes place with Pd(0) catalysts. Pd(0) complexes catalyze two important reactions of conjugated dienes[3,4]. The first type is linear dimerization. The most characteristic and useful reaction of butadiene catalyzed by Pd(0) is dimerization with incorporation of nucleophiles. The bis-rr-allylpalladium complex 3 is believed to be an intermediate of 1,3,7-octatriene (7j and telomers 5 and 6[5,6]. The complex 3 is the resonance form of 2,5-divinylpalladacyclopentane (1) and pallada-3,7-cyclononadiene (2) formed by the oxidative cyclization of butadiene. The second reaction characteristic of Pd is the co-cyclization of butadiene with C = 0 bonds of aldehydes[7-9] and CO jlO] and C = N bonds of Schiff bases[ll] and isocyanate[12] to form the six-membered heterocyclic compounds 9 with two vinyl groups. The cyclization is explained by the insertion of these unsaturated bonds into the complex 1 to generate 8 and its reductive elimination to give 9. 

The polymerization of conjugated dienes with transition metal catalytic systems is an insertion polymerization, as is that of monoalkenes with the same systems. Moreover, it is nearly generally accepted that for diene polymerization the monomer insertion reaction occurs in the same two steps established for olefin polymerization by transition metal catalytic systems (i) coordination of the monomer to the metal and (ii) monomer insertion into a metal-carbon bond. However, polymerization of dienes presents several peculiar aspects mainly related to the nature of the bond between the transition metal of the catalytic system and the growing chain, which is of o type for the monoalkene polymerizations, while it is of the allylic type in the conjugated diene polymerizations.174-183... 

The mode of reaction of titanacydobutenes with carbonyl compounds is largely dependent on steric factors (Scheme 14.31) [72]. Ketones and aldehydes tend to insert into the titanium—alkyl bond of 2,3-diphenyltitanacydobutene, and homoallylic alcohols 70 are obtained by hydrolysis of the adducts 71 [65a,73]. On the contrary, when dialkyl-substi-tuted titanacydobutenes are employed, the reaction with aldehydes preferentially proceeds through insertion into the titanium—vinyl bond. Thermal decomposition of the adducts 72 affords conjugated dienes 73 with E-stereoselectivity as a result of a concerted retro [4+2] cycloaddition [72]. 

Metal-Halogen Compounds. An unusual example of the addition of a metal halide to a conjugated diene has been reported. The complex formed from palladium chloride and butadiene has been shown to be a dimer of 1-chloromethyl-7r-allylpalladium chloride, (85). Whether this is a true insertion reaction or some type of ionic reaction has not been determined, but its close analogy with the olefin-palladium chloride insertion reaction mentioned above would suggest an insertion mechanism for the diene reaction also. 

A recently described method for insertion of a carbon monoxide molecule into the monoepoxide of a conjugated diene gives /3-lactones in high yield. This is achieved by reaction of iron pentacarbonyl with the starting vinyloxirane to give the 7r-allyl iron complex (66), which on oxidation with cerium(IV) ammonium nitrate gives the /3-lactone. In some cases, y-Iactone products can also be obtained from this reaction (8lJCS(Pi)270). 

The hydroformylation of conjugated dienes with unmodified cobalt catalysts is slow, since the insertion reaction of the diene generates an tj3-cobalt complex by hydride addition at a terminal carbon (equation 10).5 The stable -cobalt complex does not undergo facile CO insertion. Low yields of a mixture of n- and iso-valeraldehyde are obtained. The use of phosphine-modified rhodium catalysts gives a complex mixture of Cs monoaldehydes (58%) and C6 dialdehydes (42%). A mixture of mono- and di-aldehydes are also obtained from 1,3- and 1,4-cyclohexadienes with a modified rhodium catalyst (equation ll).29 The 3-cyclohexenecarbaldehyde, an intermediate in the hydrocarbonylation of both 1,3- and 1,4-cyclo-hexadiene, is converted in 73% yield, to the same mixture of dialdehydes (cis.trans = 35 65) as is produced from either diene. 

On the basis of the reaction of conjugated dienes with unsaturated halides in the presence of external nucleophiles, an elegant intramolecular version leading to a-alkylidene-y-lactams, has been developed (Scheme 8.19). Starting with an aryl halide, the regioselective insertion of an arylpalladium halide to the triple bond of acyclic compound 42 gives the c-vinylpalladium intermediate 43. Subsequent intramolecular carbopalladation of the diene affords a re-allyl palladium intermediate... 

The Co reagent 192, prepared by the reaction of Co2(CO)8 with sodium, is reactive, and the acylcobalt complex 193 is formed by the reaction of acyl halides. Insertion of butadiene at the Co-acyl bond generates the 7r-allylcobalt complex 194, from which the acylbutadiene 195 is formed by deprotonation with a base [82]. Based on this reaction, various acyldienes are prepared by Co2(CO)8-catalysed reaction of active alkyl halides, conjugated dienes and CO. The Co-catalysed reaction can be carried out smoothly under phase-transfer conditions. For example, 6-phenyl-3,5-hexadien-2-one (197) was prepared in 86% yield by the reaction of Mel, 1-phenylbutadiene (196) and CO in the presence of cetyltrimethylammonium bromide [83]. 

The insertion of olefins and conjugated dienes between carbon-bound metals has been well documented in the literature (8-10). Hanford and co-workers (//) prepared polyethylenes of molecular weight 1400 by using phenyllithium in ether solvent at high temperatures and under high pressures of ethylene. The propagation reaction was in competition with termination of the active lithium ends. 

The propagation reaction in conjugated diene polymerisation occurs by an analogous insertion, which has been demonstrated by 1H NMR analysis of the polymerisation of partially deuterated butadiene (CD2=CH—CH=CD2) with a simple re-crotyl derivative of nickel, [Ni(/73-C4DgH)I]2 [166],... 

The chemoselectivity of the polymerisation, i.e. the formation of 1,4 as against 1,2 monomeric units in resulting polymers of conjugated dienes, depends on whether enchainment of the incoming monomer occurs at the Ci or at the C3 atom of the last inserted monomeric unit. Enchainment via the Mt-Ci bond (in both the anti and syn forms) gives rise to the formation of a 1,4 monomeric unit (cis or trans respectively), whereas enchainment via the Mt-C3 bond (in both the anti and syn forms) gives rise to a 1,2 unit. Both cases of the reaction in the butadiene polymerisation system are illustrated below ... 

The adoption of reaction models available for the polymerization of conjugated dienes by Ni- and Ti-catalysts to the polymerization of BD by Nd catalysis is justified by the similarities of the respective metal carbon bonds. In each of these mechanistic models the last inserted monomer is bound to the metal in a 3-allyl mode. The existence of Ni- -allyl-moieties was demonstrated by the reaction of the deuterated nickel complex [ rf- C4D6H)NiI]2 with deuter-ated BD (deuterated in the 1- and 4-position). After each monomer insertion a new 3-allyl-bond is formed [629]. As TT-allyl-complexes are known for Ti and Ni this knowledge has been adopted for Nd-based polymerization catalysts [288,289,293,308,309,630-636,638-645]. 

Ruthenium(O) complexes such as Ru(COD)(COT) catalyze the dehydrohalo-genative coupling of vinyl halides with olefins to give substituted conjugated dienes in a Heck-type reaction [11]. Thus, alkenyl halides readily react with activated olefins to produce dienes 16 (Eq. 7). Oxidative addition of vinyl halide, followed by regioselective insertion of an electron-deficient olefin and by -hydrogen elimination leads to the diene. 

---