Conjugated diene complexes insertion reactions

In Grignard reactions, Mg(0) metal reacts with organic halides of. sp carbons (alkyl halides) more easily than halides of sp carbons (aryl and alkenyl halides). On the other hand. Pd(0) complexes react more easily with halides of carbons. In other words, alkenyl and aryl halides undergo facile oxidative additions to Pd(0) to form complexes 1 which have a Pd—C tr-bond as an initial step. Then mainly two transformations of these intermediate complexes are possible insertion and transmetallation. Unsaturated compounds such as alkenes. conjugated dienes, alkynes, and CO insert into the Pd—C bond. The final step of the reactions is reductive elimination or elimination of /J-hydro-gen. At the same time, the Pd(0) catalytic species is regenerated to start a new catalytic cycle. The transmetallation takes place with organometallic compounds of Li, Mg, Zn, B, Al, Sn, Si, Hg, etc., and the reaction terminates by reductive elimination. 

I.l.IJ Reactions nitlr 1,2-, 1.3-. ami 1.4-dienes. The reaction of conjugated dienes with aryl and alkenyl halides can be explained by the following mechanism. Insertion of a conjugated 1.3-diene into an aryl or alkenylpalladium bond gives the T-allvlpalladium complex 243 as an intermediate, which reacts further... 

The intramolecular insertion of a conjugated diene into 7r-allylpalladium, initially formed in 789, generates another rr-allyl complex 790, which is trapped with acetate anion to give a new allylic acetate 791. No further reaction of the allylic acetate with alkene takes place[489]. 

Pd-cataly2ed reactions of butadiene are different from those catalyzed by other transition metal complexes. Unlike Ni(0) catalysts, neither the well known cyclodimerization nor cyclotrimerization to form COD or CDT[1,2] takes place with Pd(0) catalysts. Pd(0) complexes catalyze two important reactions of conjugated dienes[3,4]. The first type is linear dimerization. The most characteristic and useful reaction of butadiene catalyzed by Pd(0) is dimerization with incorporation of nucleophiles. The bis-rr-allylpalladium complex 3 is believed to be an intermediate of 1,3,7-octatriene (7j and telomers 5 and 6[5,6]. The complex 3 is the resonance form of 2,5-divinylpalladacyclopentane (1) and pallada-3,7-cyclononadiene (2) formed by the oxidative cyclization of butadiene. The second reaction characteristic of Pd is the co-cyclization of butadiene with C = 0 bonds of aldehydes[7-9] and CO jlO] and C = N bonds of Schiff bases[ll] and isocyanate[12] to form the six-membered heterocyclic compounds 9 with two vinyl groups. The cyclization is explained by the insertion of these unsaturated bonds into the complex 1 to generate 8 and its reductive elimination to give 9. 

Metal-Halogen Compounds. An unusual example of the addition of a metal halide to a conjugated diene has been reported. The complex formed from palladium chloride and butadiene has been shown to be a dimer of 1-chloromethyl-7r-allylpalladium chloride, (85). Whether this is a true insertion reaction or some type of ionic reaction has not been determined, but its close analogy with the olefin-palladium chloride insertion reaction mentioned above would suggest an insertion mechanism for the diene reaction also. 

A recently described method for insertion of a carbon monoxide molecule into the monoepoxide of a conjugated diene gives /3-lactones in high yield. This is achieved by reaction of iron pentacarbonyl with the starting vinyloxirane to give the 7r-allyl iron complex (66), which on oxidation with cerium(IV) ammonium nitrate gives the /3-lactone. In some cases, y-Iactone products can also be obtained from this reaction (8lJCS(Pi)270). 

The hydroformylation of conjugated dienes with unmodified cobalt catalysts is slow, since the insertion reaction of the diene generates an tj3-cobalt complex by hydride addition at a terminal carbon (equation 10).5 The stable -cobalt complex does not undergo facile CO insertion. Low yields of a mixture of n- and iso-valeraldehyde are obtained. The use of phosphine-modified rhodium catalysts gives a complex mixture of Cs monoaldehydes (58%) and C6 dialdehydes (42%). A mixture of mono- and di-aldehydes are also obtained from 1,3- and 1,4-cyclohexadienes with a modified rhodium catalyst (equation ll).29 The 3-cyclohexenecarbaldehyde, an intermediate in the hydrocarbonylation of both 1,3- and 1,4-cyclo-hexadiene, is converted in 73% yield, to the same mixture of dialdehydes (cis.trans = 35 65) as is produced from either diene. 

The Co reagent 192, prepared by the reaction of Co2(CO)8 with sodium, is reactive, and the acylcobalt complex 193 is formed by the reaction of acyl halides. Insertion of butadiene at the Co-acyl bond generates the 7r-allylcobalt complex 194, from which the acylbutadiene 195 is formed by deprotonation with a base [82]. Based on this reaction, various acyldienes are prepared by Co2(CO)8-catalysed reaction of active alkyl halides, conjugated dienes and CO. The Co-catalysed reaction can be carried out smoothly under phase-transfer conditions. For example, 6-phenyl-3,5-hexadien-2-one (197) was prepared in 86% yield by the reaction of Mel, 1-phenylbutadiene (196) and CO in the presence of cetyltrimethylammonium bromide [83]. 

The adoption of reaction models available for the polymerization of conjugated dienes by Ni- and Ti-catalysts to the polymerization of BD by Nd catalysis is justified by the similarities of the respective metal carbon bonds. In each of these mechanistic models the last inserted monomer is bound to the metal in a 3-allyl mode. The existence of Ni- -allyl-moieties was demonstrated by the reaction of the deuterated nickel complex [ rf- C4D6H)NiI]2 with deuter-ated BD (deuterated in the 1- and 4-position). After each monomer insertion a new 3-allyl-bond is formed [629]. As TT-allyl-complexes are known for Ti and Ni this knowledge has been adopted for Nd-based polymerization catalysts [288,289,293,308,309,630-636,638-645]. 

Ruthenium(O) complexes such as Ru(COD)(COT) catalyze the dehydrohalo-genative coupling of vinyl halides with olefins to give substituted conjugated dienes in a Heck-type reaction [11]. Thus, alkenyl halides readily react with activated olefins to produce dienes 16 (Eq. 7). Oxidative addition of vinyl halide, followed by regioselective insertion of an electron-deficient olefin and by -hydrogen elimination leads to the diene. 

Conjugated dienes were thus selectively obtained by hydrovinylation of alkynes catalyzed by a cationic ruthenium alkylidene complex [43] (Eq. 31). This reaction is thought to be promoted by the ruthenium hydride species resulting from the deprotonation of the <5-methyl group of the metallic precursor, followed by the sequential insertion of alkyne and ethylene into the metal-hydride and metal-vinyl bonds. 

The electropositive nature of alkali metals allows for insertions into alkali metal-carbon bonds. Thus, the reaction of an organoaUcali metal reagent with an unsaturated organic molecule produces a more complex organoaUcali metal compound. In particular, organolithium compounds will react in this way with conjugated dienes, even under mild conditions. For example, 1,3-butadiene reacts with ferr-butyl lithium to give an allyl lithium compound (equation 15). 

To date, several jt-allylmthenium complexes have been prepared and reported. The representative methods for introducing an allyl group to a ruthenium complex are quite similar to those for other transition metals for example, (1) the reaction of ruthenium halides with allyl Grignard reagents (2) the insertion of conjugated dienes into a hydrido-ruthenium bond and (3) the oxidative addition of several allylic compounds to low-valence ruthenium complexes. 

Intramolecular reactions of allylic acetates with conjugated dienes catalyzed by Pd(0) lead to a 1,4-addition of a carbon and an oxygen nucleophile to the diene. The reaction, which is formally an isomerization, involves tw different yr-allyl complexes (Scheme 8-4) [44]. Reaction of 22 in the presence of the Pd(0) catalyst Pd2(dba)3-CHCl3 (dba = dibenzyl-ideneacetone) and LiOAc/HOAc in acetonitrile at reflux produces the cyclized isomer 25 in 62% yield. The double bond was exclusively of E stereochemistry, while the ring stereochemistry was a mixture of cis and tram isomers. Oxidative addition of the Pd(0) to the allylic acetate gives the intermediate jr-allyl complex 23. Subsequent insertion of a diene double bond into the allyl-palladium bond produces another jr-allyl intermediate (24), which is subsequendy attacked by acetate to give the product 25. 

The insertion of conjugated dienes into M-H bonds is usually irreversible since the product of the reaction is a stable allylic complex. Similarly, non-conjugated... 

Reaction of conjugated dienes with aryl and alkenyl halides can be explained by the following mechanism. Insertion of a conjugated 1,3-diene into an aryl or alkenylpalladium bond gives the 7r-allylpalladium complex 330 as an intermediate, which reacts further in two ways. As expected, nucleophiles such as carbon nucleophiles, amines, and alcohols attack the 7r-allylpalladium intermediate to form the 1,4-addition product 331 and 1,2-addition product 332. In the absence of the nucleophiles, y5-H elimination occurs to afford the substituted 1,3-diene 333. In some cases, the substituted 1,3-diene 333 reacts again with aryl halide to form the it -allylpalladium 334. Subsequent elimination affords the 1,4-diarylated 1,3-diene 335. 

Equations 3.64-3.66 illustrate routes to allyl complexes from dienes, diene complexes, and olefins. Allyl complexes have been prepared by the insertion of a conjugated diene into a metal hydride, alkyl, or acyl linkage, as illustrated for the cobalt complexes in Equation 3.64. ° Alternatively, allyl complexes have been prepared by nucleophilic or electrophilic attack on a coordinated diene. Equation 3.65 shows the formation of allyl complexes by the addition of carbanions to a cationic diene complex, and Equation 3.66 shows the formation of a cationic diene complex by the protonation of a neutral 1,3-diene complex. Allyl complexes have also been formed by the abstraction of an allylic proton from a metal-olefin complex, either by a base or by the metal itself. This reaction has been proposed as a step in the isomerization of olefins (Equation 3.67) and in the allylic oxidation of olefins (Equation 3.68). - ... 

---