Condensation reactions, base-catalyzed

Michael condensation reactions (base-catalyzed addition of active methylene compounds to activated unsaturated systems) were reported in 1887." This reaction has been used to prepare... 

Thus the reactions of cyclic or acyclic enamines with acrylic esters or acrylonitrile can be directed to the exclusive formation of monoalkylated ketones (3,294-301). The corresponding enolate anion alkylations lead preferentially to di- or higher-alkylation products. However, by proper choice of reaction conditions, enamines can also be used for the preferential formation of higher alkylation products, if these are desired. Such reactions are valuable in the a substitution of aldehydes, which undergo self-condensation in base-catalyzed reactions (117,118). Monoalkylation products are favored in nonhydroxylic solvents such as benzene or dioxane, whereas dialkylation products can be obtained in hydroxylic solvents such as methanol. The difference in products can be ascribed to the differing fates of an initially formed zwitterionic intermediate. Collapse to a cyclobutane takes place in a nonprotonic solvent, whereas protonation on the newly introduced substitutent and deprotonation of the imonium salt, in alcohol, leads to a new enamine available for further substitution. 

A Friedel-Crafts-type reaction of phenols under basic conditions is also possible. Aqueous alkaline phenol-aldehyde condensation is the reaction for generating phenol-formaldehyde resin.34 The condensation of phenol with glyoxylic acid in alkaline solution by using aqueous glyoxylic acid generates 4-hydroxyphenylacetic acid. The use of tetraalkylammonium hydroxide instead of sodium hydroxide increases the para-selectivity of the condensation.35 Base-catalyzed formation of benzo[b]furano[60]- and -[70]fullerenes occurred via the reaction of C60CI6 with phenol in the presence of aqueous KOH and under nitrogen.36... 

The carbon alpha to the carbonyl of aldehydes and ketones can act as a nucleophile in reactions with other electrophilic compounds or intermolecu-larly with itself. The nucleophilic character is imparted via the keto-enol tau-tomerism. A classic example of this reactivity is seen in the aldol condensation (41), as shown in Figure 23. Note that the aldol condensation is potentially reversible (retro-aldol), and compounds containing a carbonyl with a hydroxyl at the (3-position will often undergo the retro-aldol reaction. The aldol condensation reaction is catalyzed by both acids and bases. Aldol products undergo a reversible dehydration reaction (Fig. 23) that is acid or base catalyzed. The dehydration proceeds through an enol intermediate to form the a,(3-unsaturated carbonyl containing compound. 

Addition of an Enolate to Ketones and Aldehydes (a Condensation) 1046 Substitution of an Enolate on an Ester (a Condensation) 1046 Base-Catalyzed Keto-EnolTautomerism 1047 Acid-Catalyzed Keto-EnolTautomerism 1047 Base-Promoted Halogenation 1054 Final Steps of the Haloform Reaction 1056 Acid-Catalyzed Alpha Halogenation 1058 Acid-Catalyzed Aldol Condensation 1063 1,2-Addition and 1,4-Addition (Conjugate Addition) 1085... 

Thorpe reaction. Base-catalyzed condensation of two molecules of nitrile to yield imines that tau-tomerize to enamines. 

For these reasons, this variation is not as widely used as the anionic reaction (the aldol condensation). The base catalyzed reaction often leads to dimers, polymers, self-condensation products or a, 5-unsaturated carbonyl derivatives, as described in Section 9.4.A. Mukaiyama and co-workers modified the acid-catalyzed reaction to include silyl enol ethers. He found that they react with carbonyl compounds to produce aldol-like... 

Besides the aldol reaction to form y0-hydroxyketone, 1,3-Dipolar Cycloaddition can also form similar molecules. In addition to the Mukaiyama Aldol Reaction, the following are also similar or closely related to the aldol reaction the Claisen-Schmidt Condensation (the aldol reaction between benzaldehyde and an aliphatic aldehyde or ketone in the presence of relatively strong bases to form an o, )0-unsaturated aldehyde or ketone), the Henry Reaction (base-catalyzed addition of nitroalkane to aldehydes or ketones), the Ivanov Reaction (the addition of enediolates or aryl acetic acid to electrophiles, especially carbonyl compounds), the Knoevenagel Reaction (the condensation of aldehydes or ketones with acidic methylene compounds in the presence of amine or ammonia), the Reformatsky Reaction (the condensation of aldehydes or ketones with organozinc derivatives of of-halo-esters), and the Robinson Annulation Reaction (the condensation of ketone cyclohexanone with methyl vinyl ketone or its equivalent to form bicyclic compounds). 

Laks, RE., and R.W. Hemingway Condensed Tannins Base-catalyzed Reactions of Polymeric Procyanidins with Toluene-a-thiol. Lability of the Interflavonoid Bond and Pyran Ring. J. Chem. Soc., Perkin Trans. 1, 465 (1987). 

Atomic spectroscopy (including atomic absorption spectrometry, atomic emission spectrometry, and atomic fluorescence spectrometry) is of use across the span of reactive adhesive technologies. For example, the cure of anaerobic adhesives on non-reactive surfaces is usually assisted by the use of an active metal-based primer. Similarly, the cross-linking of silicone adhesives is promoted by the use of organometallic salts of cobalt, tin, iron, lead, and platinum. In the case of polyurethane adhesives, the key condensation reactions are catalyzed by tin salts (e.g., dibutyl tin dilaurate and stannous octoate). 

Claisen-Schmidt Condensation. The base-catalyzed condensation between an aromatic aldehyde and a ketone to yield an a ,/3-unsaturated ketone and a water molecule is known as the Claisen-Schmidt reaction (49,50). This reaction is mechanistically related to the Knoevenagel condensation, and in many aspects this reaction can be regarded as a particular case of it. 

Central in heavy-ends formation is the high reactivity of aldehyde products, in aldol condensation, Tischenko reaction [5], acetalization and oxidation reactions. Aldol condensation is base-catalyzed, acetal formation is acid-catalyzed, so it is important to keep the process medium more or less neutral. Acetals formation can only take place if alcohol by-product is produced (or if a hydroxy group is part of the feedstock/product). 

The so-called RTV-2 method — room temperature vulcanization of a two component system — adds a crosslinking agent such as tri-or tetraalkoxysUane and a metallic salt catalyst to hydroxyl terminated polysiloxane precursors. The hydroxyl end groups react with the silicic ester, e.g., tetraethyl silicate, in a condensation reaction and ethanol is liberated. This condensation reaction is catalyzed by stannous-based catalysts such as dibutyltindilaurate. 

The product of an aldol addition can be dehydrated under acidic or basic conditions to form an aldol condensation product. Base-catalyzed dehydration is an ElcB reaction. 

The most generally used carbonyl compounds for the acylation of enolate ions are esters. Here, nucleophilic addition of the anion to the carbonyl group is followed by loss of alkoxide from the tetrahedral intermediate. A classic example of this type of reaction is the Claisen condensation—the base-catalyzed self-condensation... 

Two molecules of an aldehyde can join in a reaction called an aldol condensation. This base-catalyzed reaction gives a product that is both an aldehyde and an alcohol, called an aldol. The aldol can be isolated, but it can also react further to form a conjugated unsaturated carbonyl compound and water. 

The usual base or acid catalyzed aldol addition or ester condensation reactions can only be applied as a useful synthetic reaction, if both carbonyl components are identical. Otherwise complicated mixtures of products are formed. If two different aldehydes or esters are to be combined, it is essential that one of the components is transformed quantitatively into an enol whereas the other component remains as a carbonyl compound in the reaction mixture. 

Reactions with Aldehydes and Ketones. The base-catalyzed self-addition of acetaldehyde leads to formation of the dimer, acetaldol [107-89-1/, which can be hydrogenated to form 1,3-butanediol [107-88-0] or dehydrated to form crotonaldehyde [4170-30-3]. Crotonaldehyde can also be made directiy by the vapor-phase condensation of acetaldehyde over a catalyst (53). 

The base-catalyzed reaction of acetaldehyde with excess formaldehyde [50-00-0] is the commercial route to pentaerythritol [115-77-5]. The aldol condensation of three moles of formaldehyde with one mole of acetaldehyde is foUowed by a crossed Cannizzaro reaction between pentaerythrose, the intermediate product, and formaldehyde to give pentaerythritol (57). The process proceeds to completion without isolation of the intermediate. Pentaerythrose [3818-32-4] has also been made by condensing acetaldehyde and formaldehyde at 45°C using magnesium oxide as a catalyst (58). The vapor-phase reaction of acetaldehyde and formaldehyde at 475°C over a catalyst composed of lanthanum oxide on siHca gel gives acrolein [107-02-8] (59). 

Synthesis and Properties. Polyquinolines are formed by the step-growth polymerization of o-aminophenyl (aryl) ketone monomers and ketone monomers with alpha hydrogens (mosdy acetophenone derivatives). Both AA—BB and AB-type polyquinolines are known as well as a number of copolymers. Polyquinolines have often been prepared by the Friedlander reaction (88), which involves either an acid- or a base-catalyzed condensation of an (9-amino aromatic aldehyde or ketone with a ketomethylene compound, producing quinoline. Surveys of monomers and their syntheses and properties have beenpubhshed (89—91). 

Such copolymers of oxygen have been prepared from styrene, a-methylstyrene, indene, ketenes, butadiene, isoprene, l,l-diphen5iethylene, methyl methacrjiate, methyl acrylate, acrylonitrile, and vinyl chloride (44,66,109). 1,3-Dienes, such as butadiene, yield randomly distributed 1,2- and 1,4-copolymers. Oxygen pressure and olefin stmcture are important factors in these reactions for example, other products, eg, carbonyl compounds, epoxides, etc, can form at low oxygen pressures. Polymers possessing dialkyl peroxide moieties in the polymer backbone have also been prepared by base-catalyzed condensations of di(hydroxy-/ f2 -alkyl) peroxides with dibasic acid chlorides or bis(chloroformates) (110). 

The earliest reported reference describing the synthesis of phenylene sulfide stmctures is that of Friedel and Crafts in 1888 (6). The electrophilic reactions studied were based on reactions of benzene and various sulfur sources. These electrophilic substitution reactions were characterized by low yields (50—80%) of rather poorly characterized products by the standards of 1990s. Products contained many by-products, such as thianthrene. Results of self-condensation of thiophenol, catalyzed by aluminum chloride and sulfuric acid (7), were analogous to those of Friedel and Crafts. 

Use of the trapping agent is recommended as the most efficient method for running acyloin condensations for many reasons. Among them are (a) the work-up is very simple filter and distil (b) the bis-(silyloxy)olefin is usually easier to store than the free acyloin and is readily purified by redistillation (c) unwanted base-catalyzed side reactions during reduction are completely avoided and (d) the bis-(silyloxy)olefin can be easily converted directly into the diketone by treatment with 1 mole of bromine in carbon tetrachloride.Other reactions are described in Riihlmann s review and in Organic Reactions ... 

Experimental studies of this base-catalyzed condensation have revealed that it is third-order, indicating that either the second or the fourth step must be rate-determining. Studies on the intermediate I obtained by an alternative synthesis have shown that is about four times as large as k - so that about 80% of the intermediate goes on to product. These reactions are faster than the overall reaction under the same conditions, so the second step must be rate-controlling. ... 

Chapters 1 and 2. Most C—H bonds are very weakly acidic and have no tendency to ionize spontaneously to form carbanions. Reactions that involve carbanion intermediates are therefore usually carried out in the presence of a base which can generate the reactive carbanion intermediate. Base-catalyzed condensation reactions of carbonyl compounds provide many examples of this type of reaction. The reaction between acetophenone and benzaldehyde, which was considered in Section 4.2, for example, requires a basic catalyst to proceed, and the kinetics of the reaction show that the rate is proportional to the catalyst concentration. This is because the neutral acetophenone molecule is not nucleophihc and does not react with benzaldehyde. The much more nucleophilic enolate (carbanion) formed by deprotonation is the reactive nucleophile. 

The mechanism of the Fiesselmann reaction between methylthioglycolate and a,P-acetylenic esters proceeds via consecutive base-catalyzed 1,4-conjugate addition reactions to form thioacetal Enolate formation, as a result of treatment with a stronger base, causes a Dieckmann condensation to occur providing ketone 8. Elimination of methylthioglycolate and tautomerization driven by aromaticity provides the 3-hydroxy thiophene dicarboxylate 9. 

Comforth has reviewed literature reports and independently studied the special cases of reaction of 1 with salicylaldehyde and with 2-acetoxybenzaldehyde. Coumarins (10) are afforded in the condensation of 1 with salicylaldehyde or its imine, whereas when 2-acetoxybenzaldehyde is used, acetoxy oxazolone 12 is the major product. The initial aldol condensation product between the oxazolone and 2-acetoxybenzaldehyde is the 4-(a-hydroxybenzyl)oxazolone 11, in which base-catalyzed intramolecular transacetylation is envisioned. The product 9 (R = Ac) can either be acetylated on the phenolic hydroxy group, before or after loss of acetic acid, to yield the oxazolone 12, or it can rearrange, by a second intramolecular process catalyzed by base and acid, to the hydrocoumarin, which loses acetic acid to yield 10. When salicylaldehyde is the starting material, aldol intermediate 9 (R = H) can rearrange directly to a hydrocoumarin. Comforth also accessed pure 4-(2 -hydroxyphenylmethylene)-2-phenyloxazol-5(4//)-one (13) through hydrolysis of 12 with 88% sulfuric acid. 

The mechanistic pathway of the ordinary Friedlander synthesis is not rigorously known. Two steps are formulated. In a first step a condensation reaction, catalyzed by acid or base, takes place, that can lead to formation of two different types of products (a) an imine (Schiff base) 4, or (b) an o ,/3-unsaturated carbonyl compound 5 ... 

Catalytic reduction of the nitrile 79 in the presence of semicarbazide affords initially the semicarbazone of 80. Hydrolysis-interchange, for example in the presence of pyruvic acid, gives the aldehyde 80. Condensation with the half ester of malonic acid leads to the acrylic ester 81 the double bond is then removed by means of catalytic reduction (82). Base catalyzed reaction of the... 

Replacement of a benzene ring by its isostere, thiophene, is one of the more venerable practices in medicinal chemistry. Application of this stratagem to the NSAID piroxicam, gives tenoxicam, 136, a drug with substantially the same activity, nie synthesis of this compound starts by a multi-step conversion of hydroxy thiophene carboxylic ester 130, to the sulfonyl chloride 133. Reaction of that with N-methylglycinc ethyl ester, gives the sulfonamide 134. Base-catalyzed Claisen type condensation serves to cyclize that intermediate to the p-keto ester 135 (shown as the enol tautomer). The final product tenoxicam (136) is obtained by heating the ester with 2-aminopyridine [22]. 

---