Compositions, polymer composites additives

Polyimides (PI) were among the eadiest candidates in the field of thermally stable polymers. In addition to high temperature property retention, these materials also exhibit chemical resistance and relative ease of synthesis and use. This has led to numerous innovations in the chemistry of synthesis and cure mechanisms, stmcture variations, and ultimately products and appHcations. Polyimides (qv) are available as films, fibers, enamels or varnishes, adhesives, matrix resins for composites, and mol ding powders. They are used in numerous commercial and military aircraft as stmctural composites, eg, over a ton of polyimide film is presently used on the NASA shuttle orbiter. Work continues on these materials, including the more recent electronic apphcations. 

Plastics materials, in general are blends of polymers with additives and the latter may well affect the modulus. One simple law of use here relates the modulus of the blend or composite to the modulus of the polymer Ep and of the additive by the equation... 

Samples taken during three different AN/S polymerizations were analyzed chromatographically. Target composition was 70/30 AN/S for all three polymerizations. It is difficult to prepare high nitrile copolymers of styrene because reactivity ratios of the two monomers are very different. This study used continuous addition of monomers to achieve the desired polymer composition. Addition rates were those needed to maintain an excess of acrylonitrile. 

More recently, the same author [41] has described polymer analysis (polymer microstructure, copolymer composition, molecular weight distribution, functional groups, fractionation) together with polymer/additive analysis (separation of polymer and additives, identification of additives, volatiles and catalyst residues) the monograph provides a single source of information on polymer/additive analysis techniques up to 1980. Crompton described practical analytical methods for the determination of classes of additives (by functionality antioxidants, stabilisers, antiozonants, plasticisers, pigments, flame retardants, accelerators, etc.). Mitchell... 

Though both miscible and immiscible blends are composite materials, their properties are very different. A miscible blend will exhibit a single glass transition temperature that is intermediate between those of the individual polymers. In addition, the physical properties of the blends will also exhibit this intermediate behavior. Immiscible blends, on the other hand, still contain discrete phases of both polymers. This means that they have two glass transition temperatures and that each represents one of the two components of the blend. (A caveat must be added here in that two materials that are immiscible with very small domain sizes will also show a single, intermediate value for Tg.) In addition, the physical properties... 

It was the objective of this work to investigate the effect of variation in block architecture (number and the order of the blocks) on the crystallinity level, morphology, the stress-strain and hysteresis behavior of this series of polymers. In addition, the composition ratio of the two block types is expected to play a crucial role in determining the bulk material properties of the block copolymers. This is related to the fact that the mechanical properties of block copolymer are typically influenced more substantially by the behavior of the continuous phase, as will be demonstrated.(1,22)... 

The stoppers for vials contain a certain amount of water, which depends on the composition of the stoppers. De Grazio and Flynn [1.86] showed, that the selection of the polymer, the additives for the vulcanization, and the filler influence the adsorption and desorption of water. However even the best possible mixture increases the RM in 215 mg sucrose from 1.95 % to 2.65 % during 3 months storage time at room temperature. Other stopper mixtures show an increase up to 1.7 %. Pikal and Shah [1.87] demonstrated, that the desorption of water from the stopper and the absorption of water by the product depends, in the equilibrium state, on the mass and water content of the stopper and the water content and sorption behavior of the dry product. 

Zeolites have been incorporated into and attached to fibers of various compositions for a number of applications. The types of fibers that have been used include glass [105], polymers by addition to the monomer prior to polymerization [106], optical fibers [107], cellulose pulp [108] and self-supported hoUow zeoHte fibers by a templating route [109]. 

Articles differ from preparations or substances by the fact that they have a specific form or surface. The function of the product is determined by this form (e g. sheets of floor covering) and less so by the composition of the substance (e.g. polymers and additives). 

A wide variety of polymers have been analyzed by gel-permeation, or size-exclusion, chromatography (sec) to determine molecular weight distribution of the polymer and additives (86—92). Some work has been completed on expanding this technique to determine branching in certain polymers (93). Combinations of sec with pyrolysis—gc systems have been used to show that the relative composition of polystyrene or acrylonitrile—polystyrene copolymer is independent of molecule size (94). Improvements in gpc include smaller cross-linked polystyrene beads having narrow particle size distributions, which allow higher column efficiency and new families of porous hydrophilic gels to be used for aqueous gpc (95). 

The type of chosen polymer and additives most strongly influences the rheological and processing properties of plastisols. Plastisols are normally prepared from emulsion and suspension PVC which differ by their molecular masses (by the Fickentcher constant), dimensions and porosity of particles. Dimensions and shape of particles are important not only due to the well-known properties of dispersed systems (given by the formulas of Einstein, Mooney, Kronecker, etc.), but also due to the fact that these factors (in view of the small viscosity of plasticizer as a composite matrix ) influence strongly the sedimental stability of the system. The joint solution of the equations of sedimentation (precipitation) of particles by the action of gravity and of thermal motion according to Einstein and Smoluchowski leads 37,39) to the expression for the radius of the particles, r, which can not be precipitated in the dispersed system of an ideal plastisol. This expression has the form ... 

It is also possible to prepare all-carbon polymers of closely related structure. For example, pyrolysis of polyacrylonitrile, (-CH2CHCN-)X, first results in cyclization of some of the -CN side chains.61 Prolonged pyrolysis yields very pure graphitic material. It is very strong and has high thermal stability. In the form of fibers, it can be used for reinforcement in high-performance composites. Additional information on pyrolysis is given in Chapter 9. 

A particular mention goes to Mater-Bi, produced by Novamont, who have revolutionised starch-based biomaterials for two decades. The commercial success of this biodegradable and biocompostable plastic relies on two main factors the scale economy that allows the reduction of costs, and the diversity of formulations to develop different end products (plastic bags, tableware, toys, etc.). More than 210 references in Chemical Abstracts are available on this (registered) keyword, and the number of patents related to different formulations and developments is also impressive. Mater-Bi can be essentially described as a blend of starch with a small amount of other biodegradable polymers and additives. The actual compositions are still known only by a very few people. 

These discoveries provided the technology base for commercialization efforts of starch-based plastics by the Novon division of the Warner-Lambert Company.157,158 The thermoplastic compositions were based on blends of destructurized starch and various hydrophilic polymers, such as ethylene-vinyl alcohol copolymers (EVOH). Hydrophobic polymers and additives, such as plasticizers and lubricants, could also... 

Lastly, besides inconsistency in the polymer and additives, there may be fortuitous differences between mixes of what supposedly is the same composition—such as the water content changing between summer and winter (or by night and day under some climatic conditions). Thus, provision must be made for drying and the removal of other volatiles, and (especially if the processing is by batches and components are held in store at intermediate stages) drying may be required at more than one point in the manufacture. 

For the understanding of these processes and for the design and evaluation of new separation processes, it is crucial to get a better insight in the underlying principles and phase equilibria. Especially in the investigation of complex systems such as polydisperse polymers with additives or drugs with impurities, it is necessary to get information on the composition of the coexisting phases. Up to now, there is almost no such information available. 

In this reaction (scheme 12) two cleavages occur simultaneously. The absence of products with more than two T units indicates that none of secondary reactions of the primary products takes place. Under the pyrolysis conditions, the authors used stoichiometric composition of total pyro-lyzate similar to that of the polymer. In addition, no change in functionality of siloxane units takes place, which correlates with the author s earlier results [77],... 

In Section 4 we report on a broad precursor screening with regard to polymer composition, additives, influence of spinning parameters, stabilization and carbonization conditions. 

The influence of neutral polymer polyethylene glycol and two surfactants with different charge, anionic sodium dodecylsulfate and cationic cetyltrimethylammonium bromide, on the intercalation of pre-formed Au nanoparticles into a clay matrix under ultrasonic treatment has been investigated. The polymer (surfactant) addition has been used to modify the active surface area of NaLmontmorillonite and to change the interlamellar space between the clay layers. Then, intercalated polymer (surfactant) in clay composites has been successfully replaced by Au nanoparticles under sonication. 

To improve the mechanical strength and hardness call for the use of curing agents (usually activated by a bake step after development) in the photopoly-merizing composition. Typical curing agents mentioned have been alkyl hydroperoxides, bifunctional amines, acids, etc. The last class of compounnds have been the most popular additives to the epoxy based polymer compositions. Additionally, the use of inert fillers is also known. 

---