Cobalt diene

An interesting variation is the reaction of a, -diynes on 7/ -Cp-cobalt diene complexes. 1,7-Octadiyne initially undergoes an intramolecular process to give, in the presence of an excess of nitrile, derivatives of tetrahydroisoquinoline (eq. (14)). 

One route to T -dienyl complexes is by hydride abstraction from readily available -diene complexes using a hydride acceptor, such as the trityl cation (Scheme 10.23). For an additional example involving a cobalt diene complex, see Scheme 11.23. Hydride abstraction is most easily done using cyclic complexes, which have the required Z-geometry. Acyclic complexes can be made in this way, but the Z-geometry is less easily obtained. 

Butadiene-vinyl ether copolymer using cobalt-diene complexes as catalysts [98]. 

Metal salts of neodecanoic acid have also been used as catalysts in the preparation of polymers. For example, bismuth, calcium, barium, and 2kconium neodecanoates have been used as catalysts in the formation of polyurethane elastomers (91,92). Magnesium neodecanoate [57453-97-1] is one component of a catalyst system for the preparation of polyolefins (93) vanadium, cobalt, copper, or kon neodecanoates have been used as curing catalysts for conjugated-diene butyl elastomers (94). 

Chiral salen chromium and cobalt complexes have been shown by Jacobsen et al. to catalyze an enantioselective cycloaddition reaction of carbonyl compounds with dienes [22]. The cycloaddition reaction of different aldehydes 1 containing aromatic, aliphatic, and conjugated substituents with Danishefsky s diene 2a catalyzed by the chiral salen-chromium(III) complexes 14a,b proceeds in up to 98% yield and with moderate to high ee (Scheme 4.14). It was found that the presence of oven-dried powdered 4 A molecular sieves led to increased yield and enantioselectivity. The lowest ee (62% ee, catalyst 14b) was obtained for hexanal and the highest (93% ee, catalyst 14a) was obtained for cyclohexyl aldehyde. The mechanism of the cycloaddition reaction was investigated in terms of a traditional cycloaddition, or formation of the cycloaddition product via a Mukaiyama aldol-reaction path. In the presence of the chiral salen-chromium(III) catalyst system NMR spectroscopy of the crude reaction mixture of the reaction of benzaldehyde with Danishefsky s diene revealed the exclusive presence of the cycloaddition-pathway product. The Mukaiyama aldol condensation product was prepared independently and subjected to the conditions of the chiral salen-chromium(III)-catalyzed reactions. No detectable cycloaddition product could be observed. These results point towards a [2-i-4]-cydoaddition mechanism. 

Chiral salen-cobalt(III) complexes can also catalyze the reaction of glyoxylates with activated dienes to give the cycloaddition product in moderate yield and ee [29]. 

Cobalt trifluoride fluorination corresponds to the electron-transfer mechanism via a radical cation. RF groups attached to the ring enhance the stability of intermediate dienes and monoenes. Perfluoroalkyl pyridines, pyrazines, and pyrimidines were successfully fluorinated but pyridazines eliminated nitrogen. The lack of certain dienes was attributed to the difference in stability of FC=C and RFC=C and steric effects [81JCS(P1)2059]. 

In a more recent and improved approach to cyclopropa-radicicol (228) [ 110], also outlined in Scheme 48, the synthesis was achieved via ynolide 231 which was transformed to the stable cobalt complex 232. RCM of 232 mediated by catalyst C led to cyclization product 233 as a 2 1 mixture of isomers in 57% yield. Oxidative removal of cobalt from this mixture followed by cycloaddition of the resulting cycloalkyne 234 with the cyclic diene 235 led to the benzofused macrolactone 236, which was converted to cyclopropa-radicicol (228). 

Isomerization has been observed with many a,j3-unsaturated carboxylic acids such as w-cinnamic 10), angelic, maleic, and itaconic acids (94). The possibility of catalyzing the interconversion of, for example, 2-ethyl-butadiene and 3-methylpenta-l,3-diene has not apparently been explored. The cobalt cyanide hydride will also catalyze the isomerization of epoxides to ketones (even terminal epoxides give ketones, not aldehydes) as well as their reduction to alcohols. Since the yield of ketone increases with pH, it was suggested that reduction involved reaction with the hydride [Co" (CN)jH] and isomerization reaction with [Co (CN)j] 103). A related reaction is the decomposition of 2-bromoethanol to acetaldehyde... 

Nitronate anions react with (jl-allyl)cobalt complexes prepared from acylation of 1,3-dienes by acetylcobalt tetracarbonyl to produce nitro enones (Eq. 5.50).74... 

Under the conditions of the cobalt-mediated carbonylative A-oxide-promoted cocyclization (Pauson-Khand reaction) at room temperature, compound 547 provides exocyclic 1,3-diene 548 as the major product (>98%) together with only traces of the corresponding carbonylative product 549. Owing to the relative instability of the diene, it is more efficient to perform a one-pot cobalt cyclization/Diels-Alder process after A-oxide-promoted cyclization of the cobalt complexes. Compound 550 is obtained as a single diastereomer in 39% overall yield if MTAD is used as a dienophile (Scheme 90) <2003JOC2975>. 

The catalyst activity is so high that uranium concentration lower than 0.1 millimoles per liter allows a complete conversion of butadiene to be obtained in a few hours, at 20°C, The transfer reaction of uranium based catalyst is similar to that of conventional 3d-block elements (titanium, cobalt, nickel) so that the molecular weight of the polymer is affected by polymerization temperature, polymerization time and monomer concentration in the customary way. This is in contrast, as we shall see later on, to some catalysts based on 4 f-block elements. Uranium based catalysts are able to polymerize isoprene and other dienes to high cis polymers the cis content of polyisoprene is 94%, somewhat inferior to titanium based catalysts. In contrast, with 3d-block elements an "all cis", random butadiene-isoprene... 

Some remarks concerning the scope of the cobalt chelate catalysts 207 seem appropriate. Terminal double bonds in conjugation with vinyl, aryl and alkoxy-carbonyl groups are cyclopropanated selectively. No such reaction occurs with alkyl-substituted and cyclic olefins, cyclic and sterically hindered acyclic 1,3-dienes, vinyl ethers, allenes and phenylacetylene95). The cyclopropanation of electron-poor alkenes such as acrylonitrile and ethyl acrylate (optical yield in the presence of 207a r 33%) with ethyl diazoacetate deserve notice, as these components usually... 

The cobalt(I) complex CoBr(PPh3)3 as a boron trifluoride etherate selectively hydrogenates conjugated dienes to monoenes via an unusual 1,2-hydrogen addition at the more-substituted double bond (186). 

Borohydride reduction of NiCl2 in dimethylformamide or dimethyl-acetamide leads to very active catalysts, thought to be homogeneous, for hydrogenation of monoolefins, unsaturated fats, cyclic dienes to monoenes, and saturated aldehydes and ketones (165, 538, 539). Cobaltous chloride systems have also been used (540). 

The activity of Ziegler-type systems such as M(acac) -AlEt3 (M = Cr, Mn, Fe, Co, or Ni acac = acetylacetonate) was examined with 1-olefins and triethyl- or triethoxysilanes (55). Systems with nickel or cobalt showed low activity for hydrosilation but isomerized the olefin and were reduced to the metal. The study was extended to dienes and acetylenes (56). Isoprene gave the same products with these catalysts as are made with chloroplatinic acid. Penta-1,3-diene with Pt gave l-methylbut-2-en-ylsilanes. The Ziegler catalysts gave mainly penta-2-enylsilanes... 

A mild aerobic palladium-catalyzed 1,4-diacetoxylation of conjugated dienes has been developed and is based on a multistep electron transfer46. The hydroquinone produced in each cycle of the palladium-catalyzed oxidation is reoxidized by air or molecular oxygen. The latter reoxidation requires a metal macrocycle as catalyst. In the aerobic process there are no side products formed except water, and the stoichiometry of the reaction is given in equation 19. Thus 1,3-cyclohexadiene is oxidized by molecular oxygen to diacetate 39 with the aid of the triple catalytic system Pd(II)—BQ—MLm where MLm is a metal macrocyclic complex such as cobalt tetraphenylporphyrin (Co(TPP)), cobalt salophen (Co(Salophen) or iron phthalocyanine (Fe(Pc)). The principle of this biomimetic aerobic oxidation is outlined in Scheme 8. 

Further development of this aerobic oxidation was done by utilizing a quinone containing cobalt tetraphenyl porphyrin47. This gives a more efficient electron transfer between quinone and porphyrin and results in a faster aerobic 1,4-diacetoxylation of the diene. The... 

In a related cobalt-catalyzed transformation, 1,3-dienes tethered to ally lie ethers engage in Et2AlCl-mediated reductive cyclization.463 Exposure of benzylic ether 22a to Co(acac)3-PPh3 in the presence of Et2AlCl results in formation of divinylcyclopentane 22b with excellent /raar-diastereoselectivity. As demonstrated by the conversion of 23a to 23b, this method is also applicable to the stereocontrolled formation of six-membered rings (Scheme 16). 

A mechanism was proposed in which entry into the catalytic cycle is achieved via Et2AlCl-mediated cobalt hydride generation. Diene hydrometallation affords the cobalt-complexed -jr-allyl A-5, which inserts the tethered alkene to furnish intermediate B-4. Elimination of LnCoOBn provides the cyclization product. Reduction of LnCoOBn by Et2AlCl regenerates cobalt hydride to complete the catalytic cycle (Scheme 17). 

In the presence of nickel(0), tethered diene-VCPs react to produce eight- and five-membered ring products (Scheme 2). Palladium(O) and cobalt(m) were also tried but produced only decomposition products. However, in the presence of Wilkinson s catalyst (RhCl(PPh3)3), tethered diene-VCP 1 was cleanly converted to triene 4 in 91% yield. Although the desired cycloaddition reaction was not obtained, the cleavage of the cyclopropane ring was encouraging.22... 

A hydrosilylation/cyclization process forming a vinylsilane product need not begin with a diyne, and other unsaturation has been examined in a similar reaction. Alkynyl olefins and dienes have been employed,97 and since unlike diynes, enyne substrates generally produce a chiral center, these substrates have recently proved amenable to asymmetric synthesis (Scheme 27). The BINAP-based catalyst employed in the diyne work did not function in enyne systems, but the close relative 6,6 -dimethylbiphenyl-2,2 -diyl-bis(diphenylphosphine) (BIPHEMP) afforded modest yields of enantio-enriched methylene cyclopentane products.104 Other reported catalysts for silylative cyclization include cationic palladium complexes.105 10511 A report has also appeared employing cobalt-rhodium nanoparticles for a similar reaction to produce racemic product.46... 

---