Cobalt carboxylic acids

Because of its volatility, the cobalt catalyst codistills with the product aldehyde necessitating a separate catalyst separation step known as decobalting. This is typically done by contacting the product stream with an aqueous carboxyhc acid, eg, acetic acid, subsequently separating the aqueous cobalt carboxylate, and returning the cobalt to the process as active catalyst precursor (2). Alternatively, the aldehyde product stream may be decobalted by contacting it with aqueous caustic soda which converts the catalyst into the water-soluble Co(CO). This stream is decanted from the product, acidified, and recycled as active HCo(CO)4. 

The paraffin wax is oxidized by air in a liquid phase process at 110-130°C. Catalysts for this radical reaction are cobalt or manganese salts [54]. The quality of the obtained mixture of homologous carboxylic acids is impaired by numerous byproducts such as aldehydes, ketones, lactones, esters, dicarboxylic acids, and other compounds. These are formed despite a partial conversion of the paraffin and necessitate an expensive workup of the reaction product [50,55]. 

If cobalt carbonylpyridine catalyst systems are used, the formation of unbranched carboxylic acids is strongly favored not only by reaction of a-olefins but also by reaction of olefins with internal double bonds ( contrathermo-dynamic double-bond isomerization) [59]. The cobalt carbonylpyridine catalyst of the hydrocarboxylation reaction resembles the cobalt carbonyl-terf-phos-phine catalysts of the hydroformylation reaction. The reactivity of the cobalt-pyridine system in the hydrocarboxylation reaction is remarkable higher than the cobalt-phosphine system in the hydroformylation reaction, especially in the case of olefins with internal double bonds. This reaction had not found an industrial application until now. 

Acyl halides can also be converted to carboxylic acids by using ethers instead of alcohols, in MeCN in the presence of certain catalysts such as cobalt(II) chloride. ... 

Palladium complexes also catalyze the carbonylation of halides. Aryl (see 13-13), vinylic, benzylic, and allylic halides (especially iodides) can be converted to carboxylic esters with CO, an alcohol or alkoxide, and a palladium complex. Similar reactivity was reported with vinyl triflates. Use of an amine instead of the alcohol or alkoxide leads to an amide. Reaction with an amine, AJBN, CO, and a tetraalkyltin catalyst also leads to an amide. Similar reaction with an alcohol, under Xe irradiation, leads to the ester. Benzylic and allylic halides were converted to carboxylic acids electrocatalytically, with CO and a cobalt imine complex. Vinylic halides were similarly converted with CO and nickel cyanide, under phase-transfer conditions. ... 

CHROMIUM TRIOXIDE-PYRIDINE COMPLEX, preparation in situ, 55, 84 Chrysene, 58,15, 16 fzans-Cinnamaldehyde, 57, 85 Cinnamaldehyde dimethylacetal, 57, 84 Cinnamyl alcohol, 56,105 58, 9 2-Cinnamylthio-2-thiazoline, 56, 82 Citric acid, 58,43 Citronellal, 58, 107, 112 Cleavage of methyl ethers with iodotri-methylsilane, 59, 35 Cobalt(II) acetylacetonate, 57, 13 Conjugate addition of aryl aldehydes, 59, 53 Copper (I) bromide, 58, 52, 54, 56 59,123 COPPER CATALYZED ARYLATION OF /3-DlCARBONYL COMPOUNDS, 58, 52 Copper (I) chloride, 57, 34 Copper (II) chloride, 56, 10 Copper(I) iodide, 55, 105, 123, 124 Copper(I) oxide, 59, 206 Copper(ll) oxide, 56, 10 Copper salts of carboxylic acids, 59, 127 Copper(l) thiophenoxide, 55, 123 59, 210 Copper(l) trifluoromethanesulfonate, 59, 202... 

Isomerization has been observed with many a,j3-unsaturated carboxylic acids such as w-cinnamic 10), angelic, maleic, and itaconic acids (94). The possibility of catalyzing the interconversion of, for example, 2-ethyl-butadiene and 3-methylpenta-l,3-diene has not apparently been explored. The cobalt cyanide hydride will also catalyze the isomerization of epoxides to ketones (even terminal epoxides give ketones, not aldehydes) as well as their reduction to alcohols. Since the yield of ketone increases with pH, it was suggested that reduction involved reaction with the hydride [Co" (CN)jH] and isomerization reaction with [Co (CN)j] 103). A related reaction is the decomposition of 2-bromoethanol to acetaldehyde... 

This process of crystalHzation using charges was extended to other systems using as an alternative mixtures of amines and long chain carboxylic acids. In this way, super-lattices of nanorods of cobalt and of nanocubes of iron were prepared (vide infra). 

Are used to accelerate autoxidation and hardening of oxidisable coatings. Metal soaps, used as paint driers, can be made from a variety of carboxylic acids, including the commercially important naphthenic and 2-ethyl hexanoic acids, tall oil, fatty acids, neodecanoic and isononanoic acid. Cobalt is unquestionably the most active drier metal available. Metallic driers such as cobalt naphthenate or octoate and zinc salts can interact with UVAs, HALS, or AOs. 

Recently, great advancement has been made in the use of air and oxygen as the oxidant for the oxidation of alcohols in aqueous media. Both transition-metal catalysts and organocatalysts have been developed. Complexes of various transition-metals such as cobalt,31 copper [Cu(I) and Cu(II)],32 Fe(III),33 Co/Mn/Br-system,34 Ru(III and IV),35 and V0P04 2H20,36 have been used to catalyze aerobic oxidations of alcohols. Cu(I) complex-based catalytic aerobic oxidations provide a model of copper(I)-containing oxidase in nature.37 Palladium complexes such as water-soluble Pd-bathophenanthroline are selective catalysts for aerobic oxidation of a wide range of alcohols to aldehydes, ketones, and carboxylic acids in a biphasic... 

The first commercial Fischer-Tropsch facility was commissioned in 1935, and by the end of the Second World War a total of fourteen plants had been constructed. Of these, nine were in Germany, one in France, three in Japan, and one in China. Both German normal-pressure and medium-pressure processes (Table 18.1) were employed. The cobalt-based low-temperature Fischer-Tropsch (Co-LTFT) syncrude produced in these two processes differed slightly (Table 18.2), with the product from the medium-pressure process being heavier and less olefinic.11 In addition to the hydrocarbon product, the syncrude also contained oxygenates, mostly alcohols and carboxylic acids. 

Cobalt bromide is used as a catalyst in the technology of production of arylcarboxylic acids by the oxidation of methylaromatic hydrocarbons (toluene, p-xylene, o-xylene, polymethyl-benzenes). A cobalt bromide catalyst is a mixture of cobaltous and bromide salts in the presence of which hydrocarbons are oxidized with dioxygen. Acetic acid or a mixture of carboxylic acids serves as the solvent. The catalyst was discovered as early as in the 1950s, and the mechanism of catalysis was studied by many researchers [195-214],... 

Amoco Amoco Chemicals Company, a subsidiary of Amoco Corporation, formerly Standard Oil Company (IN), is best known in the chemicals industry for its modification of the Mid-Century process for making pure terephthalic acid. /7-Xylene in acetic acid solution is oxidized with air at high temperature and pressure. Small amounts of manganese, cobalt, and bromide are used as catalysts. The modification allows the use of terephthalic acid, rather than dimethyl terephthalate, for making fiber. The process can also be used for oxidizing other methylbenzenes and methylnaphthalenes to aromatic carboxylic acids. See also Maruzen. 

A second interfacial exchange reaction of the o-acylcobalt complex with hydroxide ion leads to the production of the alkanecarboxylate anion, which migrates into the aqueous phase, leaving the cobalt tetracarbonyl anion in the organic phase for subsequent reaction (Scheme 8.2). Optimum yields of the carboxylic acids are obtained with ca. 40 1 ratio of the alkyl halide to dicobalt octacarbonyl. Co(Ph,P)2Cl2 can also be used and has the advantage that the cobalt can be recycled easily [5]. 

Aromatic acid chlorides are converted into the corresponding anhydrides in high yields (>95%), when reacted with carbon monoxide under solid liquid basic catalysed conditions in the presence of a complexed cobalt or palladium salt [6]. In the absence of the quaternary ammonium salt, only hydrolysis to the carboxylic acid occurs. 

Aryl methyl ketones have been obtained [4, 5] by a modification of the cobalt-catalysed procedure for the synthesis of aryl carboxylic acids (8.3.1). The cobalt tetracarbonyl anion is converted initially by iodomethane into the methyltetra-carbonyl cobalt complex, which reacts with the haloarene (Scheme 8.13). Carboxylic acids are generally obtained as by-products of the reaction and, in several cases, it is the carboxylic acid which predominates. Unlike the carbonylation of haloarenes to produce exclusively the carboxylic acids [6, 7], the reaction does not need photoinitiation. Replacement of the iodomethane with benzyl bromide leads to aryl benzyl ketones in low yield, e.g. 1-bromonaphthalene produces the benzyl ketone (15%), together with the 1-naphthoic acid (5%), phenylacetic acid (15%), 1,2-diphenylethane (15%), dibenzyl ketone (1%), and 56% unchanged starting material [4,5]. a-Bromomethyl ketones dimerize in the presence of cobalt octacarbonyl and... 

---