Coatings for wood

Other amino resins besides MF resins are used to a lesser degree in coatings. Urea—formaldehyde resins are used in some coatings for wood furniture because these resins cross-link at lower temperatures than MF resins and the higher water resistance and exterior durabiUty that can be obtained using MF resins are not needed. Ethers of formaldehyde derivatives of 6-phenyl-l,3,5-triazine-2,4-diamine [91-76-9] (benzoguanamine resins) give... [Pg.338]

Traditionally, UV curable polymers have been utilized as coatings for wood and vinyl floors, but their applications have increased dramatically over the last twenty years to encompass many diverse areas, including optical fiber coatings (7), adhesives (2), disc replications (3-5), and microelectronics (6). This widespread use of UV cross-linked systems is attributed to their rapid, energy efficient curing and their solvent free, one piece formulations. Typically, UV curable systems require only a small fraction of the power normally utilized in thermally cured systems and their solvent free nature offers an environmentally safer alternative. [Pg.150]

In the building field, as fire-resistant coating for wood, fiberboard, and metals, they have numerous applications. Unusual usage of the fire-resistant mastics is their application against brush fires on railway trestles constructed of wood which had been impregnated with as much as 3 gallons of creosote-petroleum oils per cubic foot. [Pg.91]

Pyrolysis also has been utilized for the determination of the structure of unique natural polymers in certain lacquers such as those produced by Rhus vernicifera and Rhus succedanea [2] and utilized as surface coating for wood, porcelain, etc. in Japan. The pyrolysis products of the two lacquer films at 400° C contain respectively laccol and urushiol, and each also contains alkenes, alkanes, alkenylphenols, and alkylphenols. From these results it was possible to assign the following structure for laccol polymer ... [Pg.435]

Low molecular weight polymeric plasticizer used in electrical wire insulation and coatings for wood, metal, fabrics and paper. [Pg.276]

Use Industrial coating for wood, plastics, paper, and electronics including parquet and safety glass interlayers. [Pg.489]

Urethane coatings for wood surfaces, prepared with lignin-based polyester-ether-polyol, have demonstrated exceptional properties in terms of solvent and chemical resistance (18), and they provide the coated wood surface with an attractive appearance. [Pg.330]

Cellulose acetate butyrate is used in a wide variety of coatings for wood because they provide many desirable properties (fast solvent release, flowout, and leveling excellent spray characteristics, nonyellowing, and cold crack resistance). [Pg.18]

Uses Binder in formulation of highly flexible, water-fhinnable coatings for wood, metal, plastics, and min. substrates binder, flexibilizer for wafer-thinnable coatings... [Pg.106]

Chem. Analysis 88% (polyvinyl butyral) 1.5% max. (polyvinyl acetate) Uses Polyvinyl butyral for coatings and adhesives binder for inks, toners, and reprographic coatings coatings for wood, metal, or plastic substrates ceramic and metal oxide binders indirect food additive Features Thermoplastic imparts adhesion, toughness, and flexibility retains clarity of coating... [Pg.136]

Uses Improves pigment control and intercoat adhesion, reduces cratering in lacquers, nail polishes, coatings for wood, metal, plastics, paper, leather, and cloth, printing inks food pkg. adhesives, coatings, paper/ paperboard, cellophane, film... [Pg.151]

Uses Used in nail care, coatings (for wood, plastic, or metal), powd. coatings food pkg. adhesives, coatings, paper/paperboard, cellophane,... [Pg.151]

Uses High gloss vehicle for inks, overprint varnishes, clear high gloss dip coatings for wood... [Pg.166]

Chem. Descrip. Branched polyester bearing hydroxyl groups Uses Formulation of flexible two-pack PU coatings for wood finishing Properties Hazen < 250 color (70% in 1 -methoxypropylacetate-2) dens. = 1.17 g/cm (20 C) vise. 400 0100 mPa-s-(23 C, 70% in 1-methoxy-propylacetate-2)acid no. < 3 pour pt. = -3 C flash pt. = 150 C < 0.1% water... [Pg.249]

Uses Acrylic for UV/EB-curable prods., water-dilutable screen and flexographic inks, spray-applied coatings for wood, monomer-free formulations... [Pg.302]

Chem. Descrip. Modified polyester acrylate oligomer Uses Polyester-acrylic for use in UV and EB curable clear overprint varnishes, clear coatings for wood, paper, and plastics, top coats for wood, flexographic inks, screen inks and coatings, wood fillers, other high gloss coatings... [Pg.302]

Chem. Descrip. Aliphatic urethane diaciylate Uses Urethane-aciylic in exterior coatings for wood, rigid and flexible plastics and metal, low gloss coatings Features Good flexibility, light fastness, exterior durability, adhesion, and abrasion resist. [Pg.302]

Uses Urethane-acrylic in exterior clear and pigmented coatings for wood, plastics, metal, and cork... [Pg.302]

Uses Urethane-acrylic in clear coatings for wood and vinyl flooring Features Provides exc. flexibility and toughness combined with superior stain and abrasion resist, and light fastness Properties Gardner 2 color m.w. 1600 vise. 6500 cps (60 C) tens. str. 10,100 psi tens, elong. 6%... [Pg.305]

Chem. Desaip. Acrylic resin with high meth methacrylate content Uses Acrylic tor solv.-applied coatings for wood, metal, and plastics, aerosol paints, inks/toners, adhesives, spedalty coatings for masonry, and reproduction papers and films, temporary binders Elvacite 2013,2014,2016,2028,2614,2550,2552,6016 [Ludte Int l.j Chem. Descrip. Methacrylate copolymer CAS 25133-97-5... [Pg.316]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...