Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Chromium trioxide, with alcohols

Would it be permissible to wash the chromium trioxide with alcohol and ether to dry it ... [Pg.127]

A better reagent for oxidation of primary alcohols to aldehydes in good yield is pyridinium chlorochromate (PCC), a complex of chromium trioxide with pyridine and HCl. [Pg.63]

Chromium peroxide (CrOs), obtained by the oxidation of chromium trioxide with hydrogen peroxide, reacts with amines forming complexes, like 2,2 -bipyridylchromium (BPCP) and pyridinechromium (PCP) peroxides, that oxidize efficiently alcohols to aldehydes and ketones 426b... [Pg.91]

The mixture of chromium trioxide with one equivalent of trimethylsilyl chloride, with no solvent added, results in the formation of an explosive red liquid that is soluble in dichloromethane or tetrachloromethane.428 It is suggested, with no spectroscopic evidence, that it consists of trimethylsilyl chlorochromate [Me3Si-0-Cr(0)2-Cl]. This compound, which can safely be used in organic solvents, is able to oxidize alcohols to aldehydes or ketones, and interacts with r-butyldimethylsilyl ethers producing deprotection, followed by oxidation of the liberated alcohol.138 Compounds analogue to trimethylsilyl chlorochromate are also able to oxidize alcohols, although they possess lesser reactivity. They can be prepared by reaction of chromium trioxide with dimethyldichlorosilane and diphenyldichlorosilane.428b... [Pg.91]

A better reagent for the limited oxidation of primary alcohols to aldehydes is pyridinium chlorochromate (PCC), a complex of chromium trioxide with pyridine and HC1. PCC oxidizes most primary alcohols to aldehydes in excellent yields. Unlike most other oxidants, PCC is soluble in nonpolar solvents such as dichloromethane (CH2C12), which is an excellent solvent for most organic compounds. PCC can also serve as a mild reagent for oxidizing secondary alcohols to ketones. [Pg.471]

A complex of chromium trioxide with pyridine and HC1. PCC oxidizes primary alcohols to aldehydes without over-oxidizing them to carboxylic acids, (p. 471)... [Pg.509]

A chromium(VI) oxidant that is applicable to oxidations of acid-sensitive substrates is the complex of chromium trioxide with two molecules of pyridine (Collins reagent). As described on pages 22 and 274, its preparation requires the portionwise addition of chromium trioxide to dry pyridine at 15-20 C (addition of pyridine to chromium oxide could cause ignition) [592, 595, 599]. Up to 6 mol of the complex is used to oxidize alcohols in dichloromethane solutions at 25 °C, and the reaction is finished in 5-15 min [595]. Alternatively, the oxidation can be carried out in pyridine cooled with an ice bath and is finished at room temperature within 15-22 h [592, 599]. [Pg.137]

Equip a I litre three-necked flask with a mechanical stirrer and a thermometer, and immerse the flask in a bath of ice and salt. Place 306 g. (283 ml.) of acetic anhydride, 300 g. (285 ml.) of glacial acetic acid and 25 g. of p-nitrotoluene in the flask, and add slowly, with stirring, 42 5 ml. of concentrated sulphuric acid. When the temperature has fallen to 5°, introduce 50 g. of A.R. chromic anhydride in small portions at such a rate that the temperature does not rise above 10° continue the stirring for 10 minutes after all the chromium trioxide has been added. Pour the contents of the flask into a 3 litre beaker two-thirds filled with crushed ice and almost fill the beaker with cold water. Filter the solid at the pump and wash it with cold water until the washings are colourless. Suspend the product in 250 ml. of cold 2 per cent, sodium carbonate solution and stir mechanically for 10-15 minutes filter (1), wash with cold water, and finally with 10 ml. of alcohol. Dry in a vacuum desiccator the yield of crude p-nitrobenzal diacetate is 26 g. (2),... [Pg.695]

Usually, organoboranes are sensitive to oxygen. Simple trialkylboranes are spontaneously flammable in contact with air. Nevertheless, under carefully controlled conditions the reaction of organoboranes with oxygen can be used for the preparation of alcohols or alkyl hydroperoxides (228,229). Aldehydes are produced by oxidation of primary alkylboranes with pyridinium chi orochrom ate (188). Chromic acid at pH < 3 transforms secondary alkyl and cycloalkylboranes into ketones pyridinium chi orochrom ate can also be used (230,231). A convenient procedure for the direct conversion of terminal alkenes into carboxyUc acids employs hydroboration with dibromoborane—dimethyl sulfide and oxidation of the intermediate alkyldibromoborane with chromium trioxide in 90% aqueous acetic acid (232,233). [Pg.315]

Concentration Effects. The reactivity of ethyl alcohol—water mixtures has been correlated with three distinct alcohol concentration ranges (35,36). For example, the chromium trioxide oxidation of ethyl alcohol (37), the catalytic decomposition of hydrogen peroxide (38), and the sensitivities of coUoidal particles to coagulation (39) are characteristic for ethyl alcohol concentrations of 25—30%, 40—60%, and above 60% alcohol, respectively. The effect of various catalysts also differs for different alcohol concentrations (35). [Pg.403]

If homolytic reaction conditions (heat and nonpolar solvents) can be avoided and if the reaction is conducted in the presence of a weak base, lead tetraacetate is an efficient oxidant for the conversion of primary and secondary alcohols to aldehydes and ketones. The yield of product is in many cases better than that obtained by oxidation with chromium trioxide. The reaction in pyridine is moderately slow the intial red pyridine complex turns to a yellow solution as the reaction progresses, the color change thus serving as an indicator. The method is surprisingly mild and free of side reactions. Thus 17a-ethinyl-17jS-hydroxy steroids are not attacked and 5a-hydroxy-3-ket-ones are not dehydrated. [Pg.242]

The 17,20-glycol grouping (with or without an additional C-21 alcohol) can be cleaved to the 17-ketone by any of the four reagents. However, the presence of a 20-ketone has a marked influence on reactivity. Thus, 17a-hydroxy-20-ketones lacking additional oxygenation at C-21 are readily cleaved only by chromium trioxide. A recent report,however, claims that 17a-hydroxypregnenolone 3-acetate can be quantitatively cleaved to dehydroepiandrosterone acetate using lead tetraacetate in an aprotic solvent... [Pg.148]

Nitrobenzaldehyde has been prepared from />-nitrotoluene by treatment with isoamyl nitrite in the presence of sodium methylate,1 by oxidation with chromyl chloride,2 cerium dioxide,3 or chromium trioxide in the presence of acetic anhydride.4 It can also be prepared by the oxidation of -nitrobenzyl chloride,5 7>-nitrobenzyl alcohol,6 or the esters of -nitrocinnamic acid.7... [Pg.63]

The alcohol (11.9 mmol) was added with stirring to a solution of chromium trioxide (69.4 mmol) and pyridine (133 mmol) in dichloro-methane (150ml) at ambient temperature. After a further 15 min, the solution was filtered, washed with saturated sodium hydrogen carbonate solution, dilute HC] and brine, and dried. Concentration and distillation gave the y -ketosilane (7.4mmol, 62%), b.p. 120°C/0.5mmHg. [Pg.134]

CHROMIUM TRIOXIDE-PYRIDINE COMPLEX, preparation in situ, 55, 84 Chrysene, 58,15, 16 fzans-Cinnamaldehyde, 57, 85 Cinnamaldehyde dimethylacetal, 57, 84 Cinnamyl alcohol, 56,105 58, 9 2-Cinnamylthio-2-thiazoline, 56, 82 Citric acid, 58,43 Citronellal, 58, 107, 112 Cleavage of methyl ethers with iodotri-methylsilane, 59, 35 Cobalt(II) acetylacetonate, 57, 13 Conjugate addition of aryl aldehydes, 59, 53 Copper (I) bromide, 58, 52, 54, 56 59,123 COPPER CATALYZED ARYLATION OF /3-DlCARBONYL COMPOUNDS, 58, 52 Copper (I) chloride, 57, 34 Copper (II) chloride, 56, 10 Copper(I) iodide, 55, 105, 123, 124 Copper(I) oxide, 59, 206 Copper(ll) oxide, 56, 10 Copper salts of carboxylic acids, 59, 127 Copper(l) thiophenoxide, 55, 123 59, 210 Copper(l) trifluoromethanesulfonate, 59, 202... [Pg.114]

Finally, chromium trioxide in the solid state causes alcohols with which it comes into contact to combust immediately. Accidents are reported with methanol. [Pg.254]

Large-scale preparation by addition of fert-butanol to chromium trioxide in a full unstirred flask with poor cooling detonated owing to local overheating. Effective cooling and stirring are essential [1]. It may safely be prepared by addition of a 40% aqueous solution of chromium trioxide to the alcohol [2],... [Pg.1009]

This complex, formerly called pyridine perchromate and now finding application as a powerful and selective oxidant, is violently explosive when dry [1], Use while moist on the day of preparation and destroy any surplus with dilute alkali [2], Preparation and use of the reagent have been detailed further [3], The analogous complexes with aniline, piperidine and quinoline may be similarly hazardous [4], The damage caused by a 1 g sample of the pyridine complex exploding during desiccation on a warm day was extensive. Desiccation of the aniline complex had to be at ice temperature to avoid violent explosion [4]. Pyridinium chlorochromate is commercially available as a safer alternative oxidant of alcohols to aldehydes [5], See Chromium trioxide Pyridine Dipyridinium dichromate See Other AMMINECHROMIUM PEROXOCOMPLEXES... [Pg.1076]

When methanol was used to rinse a pestle and mortar which had been used to grind coarse chromium trioxide, immediate ignition occurred due to vigorous oxidation of the solvent. The same occurred with ethanol, 2-propanol, butanol and cyclo-hexanol. Water is a suitable cleaning agent for the trioxide [1]. For oxidation of sec-alcohols in DMF, the oxide must be finely divided, as lumps cause violent local reaction on addition to the solution [2]. Use of methanol to reduce the Cr(VI) oxide to a Cr(III) derivative led to an explosion and fire [3], The ignitability of the butanols decreases from n -through sec- to iert-butanol [4],... [Pg.1482]

Stirring chromium trioxide (added in small portions) with the unheated solvent leads to the formation of a complex useful for oxidising alcohols to carbonyl derivatives. The trioxide must not be crushed before being added to the solvent, because violent decomposition may then occur. [Pg.1484]

ALDEHYDES FROM PRIMARY ALCOHOLS BY OXIDATION WITH CHROMIUM TRIOXIDE 1-HEPTANAL, 52, 5 ALDEHYDES FROM sym-TRITHIANE n-PENTADECANAL, 51, 39 Aldehydes, acetylenic, 54, 45 Aldehydes, aromatic, 54, 45 Aldehydes, benzyl, 54, 45 Aldehydes, olefinic, 54, 45... [Pg.54]

Oxidation, of primary alcohols to aldehydes, 52, 5 of terminal olefins with chromyl chloride, 51, 6 of 2,4,4-trimethyl-1-pentene with chromyl chloride, 51, 4 with chromium trioxide-pyridine complex, 52, 5... [Pg.62]

Primary alcohols are readUy oxidised to carboxylic acids with common oxidising agents such as potassium permanganate (KMn04) in neutral, acidic or alkaline media or by potassium dichromate (K2Cr207) and chromium trioxide (CrOg) in acidic media (Jones reagent). [Pg.98]


See other pages where Chromium trioxide, with alcohols is mentioned: [Pg.344]    [Pg.830]    [Pg.1717]    [Pg.116]    [Pg.502]    [Pg.208]    [Pg.170]    [Pg.67]    [Pg.226]    [Pg.229]    [Pg.230]    [Pg.388]    [Pg.29]    [Pg.157]    [Pg.178]    [Pg.182]    [Pg.61]    [Pg.43]    [Pg.314]    [Pg.1065]    [Pg.98]    [Pg.526]   
See also in sourсe #XX -- [ Pg.242 ]




SEARCH



Chromium alcohols

Chromium trioxide

© 2024 chempedia.info