Chromium density

Veliah S, Xiang K H, Pandey R, Redo J M and Newsam J M 1998 Density functional study of chromium oxide dusters structure, bonding, vibrations, and stability Phys. Rev. B 102 1126... 

By reference to the outline periodic table shown on p. (i) we see that the metals and non-metals occupy fairly distinct regions of the table. The metals can be further sub-divided into (a) soft metals, which are easily deformed and commonly used in moulding, for example, aluminium, lead, mercury, (b) the engineering metals, for example iron, manganese and chromium, many of which are transition elements, and (c) the light metals which have low densities and are found in Groups lA and IIA. 

Chromium. Chromium offers a number of potential advantages for high temperature appHcations, including oxidation resistance, low density, and a melting point over 400°C higher than that of nickel. Nevertheless, all efforts to use chromium have been hindered by its extreme brittieness (58). 

Second, in the early 1950s, Hogan and Bank at Phillips Petroleum Company, discovered (3,4) that ethylene could be catalyticaHy polymerized into a sohd plastic under more moderate conditions at a pressure of 3—4 MPa (435—580 psi) and temperature of 70—100°C, with a catalyst containing chromium oxide supported on siUca (Phillips catalysts). PE resins prepared with these catalysts are linear, highly crystalline polymers of a much higher density of 0.960—0.970 g/cnr (as opposed to 0.920—0.930 g/cnf for LDPE). These resins, or HDPE, are currentiy produced on a large scale, (see Olefin polymers, HIGH DENSITY POLYETHYLENE). 

High density polyethylene (HDPE) is defined by ASTM D1248-84 as a product of ethylene polymerisation with a density of 0.940 g/cm or higher. This range includes both homopolymers of ethylene and its copolymers with small amounts of a-olefins. The first commercial processes for HDPE manufacture were developed in the early 1950s and utilised a variety of transition-metal polymerisation catalysts based on molybdenum (1), chromium (2,3), and titanium (4). Commercial production of HDPE was started in 1956 in the United States by Phillips Petroleum Company and in Europe by Hoechst (5). HDPE is one of the largest volume commodity plastics produced in the world, with a worldwide capacity in 1994 of over 14 x 10 t/yr and a 32% share of the total polyethylene production. 

Iron carbide (3 1), Fe C mol wt 179.56 carbon 6.69 wt % density 7.64 g/cm mp 1650°C is obtained from high carbon iron melts as a dark gray air-sensitive powder by anodic isolation with hydrochloric acid. In the microstmcture of steels, cementite appears in the form of etch-resistant grain borders, needles, or lamellae. Fe C powder cannot be sintered with binder metals to produce cemented carbides because Fe C reacts with the binder phase. The hard components in alloy steels, such as chromium steels, are double carbides of the formulas (Cr,Fe)23Cg, (Fe,Cr)2C3, or (Fe,Cr)3C2, that derive from the binary chromium carbides, and can also contain tungsten or molybdenum. These double carbides are related to Tj-carbides, ternary compounds of the general formula M M C where M = iron metal M = refractory transition metal. 

Union Carbide Corp. also uses a siUca-supported chromium catalyst in their extremely low cost Unipol gas-phase linear low density ethylene copolymer process, which revolutionized the industry when it was introduced in 1977 (86—88). The productivity of this catalyst is 10 —10 kg polymer/kg transition metal contained in the catalyst. By 1990, the capacity of Unipol linear low density polyethylene reactors was sufficient to supply 25% of the world s total demand for polyethylene. 

Hard plating is noted for its excellent hardness, wear resistance, and low coefficient of friction. Decorative plating retains its brilliance because air exposure immediately forms a thin, invisible protective oxide film. The chromium is not appHed directiy to the surface of the base metal but rather over a nickel (see Nickel and nickel alloys) plate, which in turn is laid over a copper (qv) plate. Because the chromium plate is not free of cracks, pores, and similar imperfections, the intermediate nickel layer must provide the basic protection. Indeed, optimum performance is obtained when a controlled but high density (40—80 microcrack intersections per linear millimeter) of microcracks is achieved in the chromium lea ding to reduced local galvanic current density at the imperfections and increased cathode polarization. A duplex nickel layer containing small amounts of sulfur is generally used. In addition to... 

Table 9 Hsts select properties of Co—Cr alloys. It is generally conceded that the casting shrinkage of the cobalt—chromium alloys is greater than that of the gold alloys. The lower density of the base metal alloys provides a weight advantage over the higher-density gold alloys in certain types of bulky restorations. Cobalt—chromium alloys have Knoop hardnesses of 310—415.

Low pressure (0.1 to 20 MPa) and temperatures of 50 to 300°C using heterogeneous catalysts such as molybdenum oxide or chromium oxide supported on inorganic carriers to produce high density polyethylene (HDPE), which is more linear in nature, with densities of 0.94 to 0.97 g/cm. ... 

Metal atoms tend to behave like miniature ball-bearings and tend to pack together as tightly as possible. F.c.c. and c.p.h. give the highest possible packing density, with 74% of the volume of the metal taken up by the atomic spheres. However, in some metals, like iron or chromium, the metallic bond has some directionality and this makes the atoms pack into the more open b.c.c. structure with a packing density of 68%. 

L3M45M4 5 would often appear as L3M2,3V and L3W, respectively, and similarly 1 2,3 4,5 4,51 as M2,3W. In Fig. 2.22 the increase in the intensity of the L3W peak relative to the other two, upon going from chromium to iron, is because of the progressive increase in the electron density in the valence band. The characteristic doublet seen in the MNN series arises from the M4 5N4,sN4,5 transitions, in which the doublet separation is that of the core levels M4 and M5. 

CALCULATION OF THE ELECTRONIC STRUCTURE OF ANTIFERROMAGNETIC CHROMIUM WITH A SINUSOIDAL SPIN DENSITY WAVE BY THE METHOD OF DIRAC FUNCTION LINEAR COMBINATION... 

---