Chromatography properties selectivity factor

Many pharmaceutical preparations contain multiple components with a wide array of physico-chemical properties. Although CZE is a very effective means of separation for ionic species, an additional selectivity factor is required to discriminate neutral analytes in CE. Terabe first introduced the concept of micellar electrokinetic capillary chromatography (MEKC) in which ionic surfactants were included in the running buffer at a concentration above the critical micelle concentration (CMC) [17], Micelles, which have hydrophobic interiors and anionic exteriors, serve as a pseudostation-ary phase, which is pumped electrophoretically. Separations are based on the differential association of analytes with the micelle. Interactions between the analyte and micelles may be due to any one or a combination of the following electrostatic interactions, hydrogen bonding, and/or hydro-phobic interactions. The applicability of MEKC is limited in some cases to small molecules and peptides due to the physical size of macromolecules... 

The most important parameter for the control of liquid chromatography is the composition of the eluent. Liquid chromatography is a powerful separation method with unlimited possibilities of eluent selection. However, it is not easy to choose a suitable eluent within a short time without a number of trial experiments. The crucial factor is to control the solubility of the analytes in the eluent. Increasing the solubility of analytes in the eluent decreases their retention times. The selection of the components of an eluent is described below, based on the properties of the analytes to be separated. The important properties are hydrophobicity, dipole moment, hydrogen bonding, ionization, and steric effects. 

The factors that control separation and dispersion are quite different. The relative separation of two solutes is solely dependent on the nature and magnitude of the Interactions between each solute and the two phases. Thus, the relative movement of each solute band would appear to be Independent of column dimensions or particle geometry and be determined only by the choice of the stationary phase and the mobile phase. However, there is a caveat to this statement. It assumes that any exclusion properties of the stationary phase are not included in the term particle geometry. The pore size of the packing material can control retention directly and exclusively, as in exclusion chromatography or, indirectly, by controlling the access of the solute to the stationary phase in normal and reverse phase chromatography. As all stationary phases based on silica gel exhibit some exclusion properties, the ideal situation where the selective retention of two solutes is solely controlled by phase interactions is rarely met in practice. If the molecular size of the solutes differ, then the exclusion properties of the silica gel will always play some part in solute retention. 

In normal-phase or adsorption chromatography, the chromatographic properties are functions of the specific area. Retention factors increase with the specific surface area. The parameter of the specific surface area of the packing could be of great importance when selectivity and efficiency have to be improved. One very short column packed with a silica of high specific surface area will yield the same results as a long column packed with a silica of low specific surface area (18). 

Abstract Most analytical applications of molecularly imprinted polymers are based on their selective adsorption properties towards the template or its analogs. In chromatography, solid phase extraction and electrochromatography this adsorption is a dynamic process. The dynamic process combined with the nonlinear adsorption isotherm of the polymers and other factors results in complications which have limited the success of imprinted polymers. This chapter explains these problems and shows many examples of successful applications overcoming or avoiding the problems. 

In the case of HPLC methods, selectivity is usually characterized by the ratio of the respective retention factors ( values) of two compounds. This a value has useful properties in linear chromatography, i.e., when the adsorption isotherms of both substances are linear, with slopes K and K2, these being the corresponding distribution ratios between the stationary phase and the eluent. In linear chromatography... 

Experimental work of Kalasz et al. resulted in the statement of the characteristics and basic rules of displacement chromatography. They conceived properties of the fully developed displacement train, factors affecting displacement development, efficacy of separation, analysis of displaced fractions, determination of displacement diagrams from Langmuirian isotherms, as well as selection of the column, carrier, and displacer for displacement chromatography. Concentration of the sample is a particular feature of displacement chromatography. However, the displacer in the carrier is also definitely concentrated through the development of the displacement train. 

The eluent used in anion chromatography contains an eluent anion, E". Usually Na" or will be the cation associated with E". The eluent anion must be compatible with the detection method used. For conductivity, the detection E should have either a significantly lower conductivity than the sample ions or be capable of being converted to a non-ionic form by a chemical suppression system. When spectrophoto-metric detection is employed, E will often be chosen for its ability to absorb strongly in the UV or visible spectral region. The concentration of E in the eluent will depend on the properties of the ion exchanger used and on the types of anions to be separated. Factors involved in the selection of a suitable eluent are discussed later. 

The spectroscopic and photochemical properties of the synthetic carotenoid, locked-15,15 -cA-spheroidene, were studied by absorption, fluorescence, CD, fast transient absorption and EPR spectroscopies in solution and after incorporation into the RC of Rb. sphaeroides R-26.1. High performance liquid chromatography (HPLC) purification of the synthetic molecule reveal the presence of several Ai-cis geometric isomers in addition to the mono-c/x isomer of locked-15,15 -c/x-spheroidene. In solution, the absorption spectrum of the purified mono-cA sample was red-shifted and showed a large c/x-peak at 351 nm compared to unlocked all-spheroidene. Spectroscopic studies of the purified locked-15,15 -mono-c/x molecule in solution revealed a more stable manifold of excited states compared to the unlocked spheroidene. Molecular modeling and semi-empirical calculations revealed that geometric isomerization and structural factors affect the room temperature spectra. RCs of Rb. sphaeroides R-26.1 in which the locked-15,15 -c/x-spheroidene was incorporated showed no difference in either the spectroscopic properties or photochemistry compared to RCs in which unlocked spheroidene was incorporated or to Rb. sphaeroides wild type strain 2.4.1 RCs which naturally contain spheroidene. The data indicate that the natural selection of a c/x-isomer of spheroidene for incorporation into native RCs of Rb. sphaeroides wild type strain 2.4.1 was probably more determined by the structure or assembly of the RC protein than by any special quality of the c/x-isomer of the carotenoid that would affect its ability to accept triplet energy from the primary donor or to carry out photoprotection. 

---