Template, chiral

Chiral synthetic polymer phases can be classified into three types. In one type, a polymer matrix is formed in the presence of an optically pure compound to moleculady imprint the polymer matrix (Fig. 10) (107,108). Subsequent to the polymerisation, the chiral template is removed, leaving the polymer matrix... 

Fig. 10. The relationship between a chiral template molecule and the polymeric matrix formed ia the presence of the template molecule.

Marazano and co-workers have used the Zincke reaction extensively to prepare chiral templates for elaboration to substituted piperidine and tetrahydropyridine natural products and medicinal agents. For example, 3-picoline was converted to Zincke salt 40 by reaction with 2,4-dinitrochlorobenzene in refluxing acetone, and treatment with R- -)-phenylglycinol in refluxing n-butanol generated the chiral pyridinium 77. Reduction to... 

C, 92% ee at -20 °C, 88% ee at 0°C in the reaction of acrolein and cyclopen-tadiene). This is unusual for metal-catalyzed asymmetric reactions, with only few similar examples. The titanium catalyst 10 acts as a suitable chiral template for the conformational fixing of a,/ -unsaturated aldehydes, thereby enabling efficient enantioface recognition, irrespective of temperature. 

Significantly, the acidic conditions for release of the amino acid derivatives from the chiral template gives access to arylglycines, even those carrying electron-withdrawing substituents, e.g., a chlorine atom, which arc prone to ready racemization under basic conditions. 

In conclusion, the use of glycosylamincs as chiral templates in the Ugi reaction provides an efficient and highly stereoselective access to both l- and D-amino acids. 

Induction of asymmetry into the /J-lactam-forming process was inefficient with acyclic imines having chiral groups on the nitrogen [19] but efficient with rigid, cyclic chiral imines (Table 3). One of these was used as a chiral template to produce highly functionalized quaternary systems (Eq. 5) [34]. 

Stereoselective inverse-demand hetero (4 + 2) cycloadditions. A Chiral Template for C-Aryl Glycoside Synthesis. Chiral allenamides2 4 had been used in highly stereoselective inverse-demand hetero (4 + 2) cycloaddition reactions with heterodienes.5 These reactions lead to stereoselective synthesis of highly functionalized pyranyl heterocycles. Further elaboration of these cycloadducts provides a unique entry to C-aryl-glycosides and pyranyl structures that are common in other natural products (Scheme 1). 

Kunz H., Mueller B., Pfrengle, W., Rueck K., Staehle W. Carbohydrates As Chiral Templates in Stereoselective [4 + 2 Cycloaddition Reactions ACS Symp. Ser. 1992 494 131-146... 

In this work a new approach is desribed, which can help to understand ED over heterogeneous catalysts We also hope that this approach can be used to find new modifiers for enantioselective heterogeneous catalytic reactions. The basis for this approach is the steric shielding known in organic chemistry [7,8]. A chiral template molecule can induce shielding effect (SE) in such a way that it preferentially interacts with one of the prochiral sites of the substrate. If a substrate is preferentially shielded its further reaction can take place only fi"om its unshielded site resulting in ED. 

Preparation of chiral mesoporous materials has become a great interest for material scientists. Normally chiral property is introduced into chiral mesoporous material via an organic chiral templating component. But, by using a sonochemical method, Gabashvili et al. [36] have prepared mesoporous chiral titania using a chiral inorganic precursor and a non-chiral dodecylamine as a template. Size of the pores was 5.5 nm. 

L. and Mann, S. (2002) Chiral templating of silica-lipid lamellar mesophase with helical tubular architecture. Angewandte Chemie-International Edition, 41, 2988-2991. 

Synthetic methods include the use of silanes bearing a chiral group for silylating the surface of the porous sol-gel silica, the use of such silanes as monomers or co-monomers in the polycondensation, the physical entrapment of chiral molecules, the imprinting of SG materials with chiral templates and the creation of chiral pores, and the induction of chirality in the matrix skeleton itself 48... 

Figure 1.21 Schematic representation of the strategy of molecular chiral imprinting of a sol-gel matrix using a chiral template and suitable achiral silanes. (Reproduced from ref. 48, with permission.)...

ORMOSIL are chemical sponges they adsorb and concentrate reactants at their surface, thereby enhancing reaction rates and sensitivity (in sensing applications). ORMOSIL-imprinted materials with a suitable chiral template such as a surfactant or a protein selectively adsorb (and detect) external reactants. A remarkable example is provided by thin materials that are generally enantioselective, namely where the chirally imprinted cavities can discriminate between enantiomers of molecules not used in the imprinting process, and completely different from the imprinting ones. 

A. M. Seddon, H. M. Patel, S. L. Burkett and S. Mann, Chiral Templating of Silica-Lipid Lamellar Mesophase with Helical Tubular Architecture, Angew. Chem. Int. Ed., 2002, 41, 2988. 

In some sugar-based lactones, the carbohydrate moiety can serve as a chiral template. For example, the synthesis and characterisation of a novel chiral bicyclic caprolactone 1 was reported in 2003 in six steps from 1,2,5,6-di-O-isopropylidene-a-D-glucofuranose.10 The introduction of... 

In 1990, Choudary [139] reported that titanium-pillared montmorillonites modified with tartrates are very selective solid catalysts for the Sharpless epoxidation, as well as for the oxidation of aromatic sulfides [140], Unfortunately, this research has not been reproduced by other authors. Therefore, a more classical strategy to modify different metal oxides with histidine was used by Moriguchi et al. [141], The catalyst showed a modest e.s. for the solvolysis of activated amino acid esters. Starting from these discoveries, Morihara et al. [142] created in 1993 the so-called molecular footprints on the surface of an Al-doped silica gel using an amino acid derivative as chiral template molecule. After removal of the template, the catalyst showed low but significant e.s. for the hydrolysis of a structurally related anhydride. On the same fines, Cativiela and coworkers [143] treated silica or alumina with diethylaluminum chloride and menthol. The resulting modified material catalyzed Diels-Alder reaction between cyclopentadiene and methacrolein with modest e.s. (30% e.e.). As mentioned in the Introduction, all these catalysts are not yet practically important but rather they demonstrate that amorphous metal oxides can be modified successfully. 

Aldonolactones are useful starting materials for the synthesis of modified sugars. They have also been used as chiral templates in synthesis of natural products. Some of them are inexpensive, commercially available products or they may be obtained readily from the respective monosaccharides. The purpose of this chapter is to survey the main reactions of aldonolactones. Previous reviews on the subject include articles on gulono-1,4-lactones (1) and D-ribonolactone (2). Methods of synthesis, conformational analysis, and biological properties are not discussed in this chapter. 

The regio- and stereo-selective functionalization of aldonolactones yields optically active lactones, which are important precursors in natural product synthesis. Concepts such as chiral templates and chirons, derived from carbohydrates, have been ingeniously and widely applied in synthesis (233). Among the commercially available aldonolactones, D-ribono-1,4-lactone is... 

Molecular imprinted polymers MIPs exhibit predetermined enan-tioselectivity for a specific chiral molecnle, which is nsed as the chiral template dnring the imprinting process. Most MIPs are obtained by copolymerization from a mixture consisting of a fnnctional mono-nnsatn-rated (vinylic, acrylic, methacrylic) monomer, a di- or tri-nnsatnrated cross-linker (vinylic, acrylic, methacrylic), a chiral template (print molecnle) and a porogenic solvent to create a three-dimensional network. When removing the print molecnle, chiral cavities are released within the polymer network. The MIP will memorize the steric and functional binding featnres of the template molecnle. Therefore, inclusion of the enantiomers into the asymmetric cavities of this network can be assumed as... 

Within the area of molecular magnets, oxalate-bridged 3D networks of the type X" "[M M C204)3] are important, and of significance is the introduction of chiral cations X" ". Examples have included enantiomers of [Ru(bpy)2L]+ where HL = 2-phenylpyridine or 8-hydroxyquinoline, which are able to act as chiral templates in the construction of 3D polymeric networks. ... 

Last year, a short enantioselective total synthesis of herbarumin III (42) in 11% overall yield was published the approach applied uses Keck s asymmetric allylation and Sharpless epoxidation to build the key fragment. Esterification with 5-hexenoic acid and a RCM was used to yield 42. Finally, another asymmetric synthesis of herbarumin III (42) was carried out using (R)-cyclohexylidene glyceraldehyde as the chiral template. The key steps of the synthesis were the enantioselective preparation of the... 

Wullf and Hohn recently described several new stereochemical results (93). They reported the synthesis of a copolymer between a substituted styrene (M ) and methyl methaciylate (M2) having, at least in part, regular. . . M,M M2M MiM2. . . sequences. Polymerization involves the use of a chiral template to which the styrene monomer is loosely bound. After elimination of the template, the polymer shows notable optical activity that must be ascribed to the presence of a chiral stmcture similar to that shown in 53 (here and in other formulas methylene groups are omitted when unnecessaiy for stereochemical information). This constitutes the first stereoregular macromolecular compound having a three monomer unit periodicity. 

There have been two main approaches to the development of dipolarophile facial selectivity (1) the use of chiral substrates, templates, and auxiharies and (2) the use of chiral rhodium catalysts [35]. In one of the earhest examples of chiral substrate selectivity, Pirmng and Lee reported a selective hydroxy-directed cycloaddition with chiral hydroxy-substituted vinyl ethers [95]. This effort was followed by a number of chiral template approaches to diastereocontrol, including the use of (R)- or (S)-phenylglycinol to form a cycHc phenyloxazinone for the facially selective cycloaddition of isomtinchnones [96, 97]. Padwa and Prein demonstrated acycHc diastereofacial control in the cycloaddi-... 

Copolymerization of a monomer having two styrene moieties attached to a chiral template molecule with a comonomer e.g., methyl methacrylate) gives copolymers with strong optical activity after removal of the template molecules. In this case styrene diads of an S,S configuration separated from other styrene diads by comonomeric units are responsible for the optical activity. 

Chirality can be introduced at two possible sites on the basic tripodal structures replacing the tripodal template by a chiral template or modifying each arm with a chiral component, usually as amino acids, between the template and the ligating groups. Incorporation of amino acids inevitably introduced an amide bond known to promote intricate H-bonding networks. The latter can be applied to the various templates described so far. 

Similiar to albomycin and ferrichromes, the linear tripeptide of A -hydroxy-A -acetyl-ornithine can be used as the simplest chiral template for artificial siderophores. It can be used alone as a tripeptide like for 80, can be conjugated to a hydrophobic fatty acid 81132 pj. p j.j longer peptide 82, 83, and 85. ... 

In 2005, various groups independently realized the potential of the easily available cinchona alkaloids as chiral templates for the synthesis of the new class... 

Stationary phases with specific molecular recognition properties for D,L-enantiomers of peptides have been tailored using the molecular imprinting technique. A template molecule is added to suitable monomer(s), the system is polymerized, and the chiral template molecule is washed out [128]. 

---