Chemically reactive additives polyesters

Additionally, polyesters and polyethers may contain several impurities derived from their methods of manufacture and being polymeric materials may vary in molecular weight and type of end-group. For routine analysis of raw materials, a determination of hydroxyl value, acid value and water content is usually sufficient. The reactivity of polyesters of the same chemical type can vary widely and for this reason it is sensible that an activity test be performed similar to that for diisocyanates using a diisocyanate of standardized activity. 

A high reactivity, chemically thickenable, unaccelerated polyester containing up to 28% recycle content which performs well with low profile additives and exhibits consistent lot-to-lot thickening. Finds RTM, wetmoulding and pultrusion processing application for truck panels, stmctural parts and general purpose use. 

In 1929 Carothers proposed a generally useful differentiation between two broad classes of polymers condensation polymers in which the molecular formula of the structural unit (or units) lacks certain atoms present in the monomer from which it is formed, or to which it may be degraded by chemical means, and addition polymers, in which the molecular formula of the structural unit (or units) is identical with that of the monomer from which the polymer is derived. Condensation polymers may be formed from monomers bearing two or more reactive groups of such a character that they may condense intermolecu-larly with the elimination of a by-product, often water. The polyamides and polyesters referred to above afford prime examples of condensation polymers. The formation of a polyester from a suitable hydroxy acid takes place as follows ... 

Telechelic polymers rank among the oldest designed precursors. The position of reactive groups at the ends of a sequence of repeating units makes it possible to incorporate various chemical structures into the network (polyether, polyester, polyamide, aliphatic, cycloaliphatic or aromatic hydrocarbon, etc.). The cross-linking density can be controlled by the length of precursor chain and functionality of the crosslinker, by molar ratio of functional groups, or by addition of a monofunctional component. Formation of elastically inactive loops is usually weak. Typical polyurethane systems composed of a macromolecular triol and a diisocyanate are statistically simple and when different theories listed above are... 

The polyester resin used in this study, MR 13006 (Aristech Corporation), was supplied as a 60-wt% solution in styrene monomer. The epoxy resin, a digly-cidyl ether of bisphenol A (Epon 828), was obtained from Shell Chemical Company. The reactive liquid rubber, an amino-terminated butadiene-acrylonitrile copolymer (ATBN 1300 x 16), was provided by the BFGoodrich Company. The resin was mixed with additional styrene monomer to maintain the ratio of reactive unsaturation in the polyester-to-styrene monomer at 1 to 3. We added 1.5 wt% of tert-butylperbenzoate initiator to the solution, which we then degassed under vacuum. The mixture was poured between vertical, Teflon-coated, aluminum plates and cured under atmospheric pressure at 100 °C. In the modified compositions, the rubber was first dissolved in the styrene monomer, and then all the other components were added and the solution cured as described. In all the compositions, the ratio of the amine functions with respect to the epoxy functions was kept at 1 to ensure complete cure of the epoxy. 

Unsaturated polyester resins are mainly made by condensing a dibasic acid (1,2-propanediol) with an anhydride (maleic or phthalic anhydrides), by forming ester linkages between the dibasic acid (or their anhydrides) and glycols. Then a reactive monomer (mostly styrene or vinyl toluene, MMA or diallyl phthalate) is used to crosslink the system when needed. Unsaturated denotes the uncompleted chemical activity (double bond) in the original structure, which are used for crosslinking afterwards. In this context, an excess of styrene as the crosslinker (10 to 50 %) is usually added to have it ready in the system, as well as to reduce the viscosity. There are also certain accelerators used (such as, cobalt naphthenate or tertiary amines like dimethyl aniline) to facilitate the cure at ambient temperatures. In addition, there may be pigments, fillers, various inhibitors, accelerators, stabilisers and flame retardants, added to the system. Polymerisation is activated whenever a catalyst (i.e., benzoyl or methyl-ethyl-ketone peroxide) is added. 

NFPA Health 0, Flammability 1, Reactivity 0 Uses Comonomer for alkyds and unsat. polyester resins chemical intermediate for paints, in polyester bottle resins, fibers, and films in prod, of terephthalic acid esters forms polyesters with glycols in analytical chemistry reagent for alkali in wool as poultry food additive... 

---