Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Michael addition catalysts

The products of the reaction of 4-hydroxy-6-methylpyran-2-one with alkynic esters show some dependence on the solvent used. Dimethyl butyndioate yields the bicyclic pyranone (325) in the absence of solvent and using Triton B as the catalyst. Michael addition is envisaged to yield the intermediate dione (324) which cyclizes in the normal manner... [Pg.793]

The addition of active methylene compounds (ethyl malonate, ethyl aoeto-acetate, ethyl plienylacetate, nltromethane, acrylonitrile, etc.) to the aP-double bond of a conjugated unsaturated ketone, ester or nitrile In the presence of a basic catalyst (sodium ethoxide, piperidine, diethylamiiie, etc.) is known as the Michael reaction or Michael addition. The reaction may be illustrated by the addition of ethyl malonate to ethyl fumarate in the presence of sodium ethoxide hydrolysis and decarboxylation of the addendum (ethyl propane-1 1 2 3-tetracarboxylate) yields trlcarballylic acid ... [Pg.912]

Torgov introduced an important variation of the Michael addition allylic alcohols are used as vinylogous a -synthons and 1,3-dioxo compounds as d -reagents (S.N. Ananchenko, 1962, 1963 H. Smith, 1964 C. Rufer) 1967). Mild reaction conditions have been successful in the addition of ],3-dioxo compounds to vinyl ketones. Potassium fluoride can act as weakly basic, non-nudeophilic catalyst in such Michael additions under essentially non-acidic and non-basic conditions (Y. Kitabara, 1964). [Pg.71]

Addition of HCN to unsaturated compounds is often the easiest and most economical method of making organonitnles. An early synthesis of acrylonitrile involved the addition of HCN to acetylene. The addition of HCN to aldehydes and ketones is readily accompHshed with simple base catalysis, as is the addition of HCN to activated olefins (Michael addition). However, the addition of HCN to unactivated olefins and the regioselective addition to dienes is best accompHshed with a transition-metal catalyst, as illustrated by DuPont s adiponitrile process (6—9). [Pg.217]

These reversible reactions are cataly2ed by bases or acids, such as 2iac chloride and aluminum isopropoxide, or by anion-exchange resias. Ultrasonic vibrations improve the reaction rate and yield. Reaction of aromatic aldehydes or ketones with nitroparaffins yields either the nitro alcohol or the nitro olefin, depending on the catalyst. Conjugated unsaturated aldehydes or ketones and nitroparaffins (Michael addition) yield nitro-substituted carbonyl compounds rather than nitro alcohols. Condensation with keto esters gives the substituted nitro alcohols (37) keto aldehydes react preferentially at the aldehyde function. [Pg.100]

Vinylpyridine (23) came into prominence around 1950 as a component of latex. Butadiene and styrene monomers were used with (23) to make a terpolymer that bonded fabric cords to the mbber matrix of automobile tires (25). More recendy, the abiUty of (23) to act as a Michael acceptor has been exploited in a synthesis of 4-dimethylaminopyridine (DMAP) (24) (26). The sequence consists of a Michael addition of (23) to 4-cyanopyridine (15), replacement of the 4-cyano substituent by dimethylamine (taking advantage of the activation of the cyano group by quatemization of the pyridine ring), and base-cataly2ed dequatemization (retro Michael addition). 4-r)imethyl aminopyri dine is one of the most effective acylation catalysts known (27). [Pg.326]

Michael-Type Additions. Michael additions are generally used to prepare methyl 3-mercaptopropionate (eq. 10) and mercaptopropionitrile (eq. 11) by the reaction of methyl acrylate or acrylonitrile and hydrogen sulfide using a basic catalyst. This reaction proceeds as shown ... [Pg.11]

Adolph Baeyer is credited with the first recognition of the general nature of the reaction between phenols and aldehydes in 1872 ([2,5-7] [18], Table 5.1). He reported formation of colorless resins when acidic solutions of pyrogallic acid or resorcinol were mixed with oil of bitter almonds, which consists primarily benzaldehyde. Baeyer also saw resin formation with acidic and basic solutions of phenol and acetaldehyde or chloral. Michael and Comey furthered Baeyer s work with additional studies on the behavior of benzaldehyde and phenols [2,19]. They studied a variety of acidic and basic catalysts and noted that reaction vigor followed the acid or base strength of the catalyst. Michael et al. also reported rapid oxidation and darkening of phenolic resins when catalyzed by alkaline materials. [Pg.870]

Boron trifluoride etherate, is also a good catalyst for this hydride transfer to chalcone. Unlike triphenylmethyl perchlorate, however, chalcone is able to enter Michael additions with the 1,5-diketone followed by eliminations leading to unexpected products, e.g., 3-benzyl-2,4,6-triphenylpyrylium from 2-carbethoxy-l,3,5-tri-phenylpentane-l,5-dione and chalcone the benzyl group originates from chalcone, the elimination product being ethyl benzoylacetate. ... [Pg.281]

As shown above, it was not so easy to optimize the Michael addition reactions of l-crotonoyl-3,5-dimethylpyrazole in the presence of the l ,J -DBFOX/ Ph-Ni(C104)2 3H20 catalyst because a simple tendency of influence to enantio-selectivity is lacking. Therefore, we changed the acceptor to 3-crotonoyl-2-oxazolidi-none in the reactions of malononitrile in dichloromethane in the presence of the nickel(II) aqua complex (10 mol%) (Scheme 7.49). For the Michael additions using the oxazolidinone acceptor, dichloromethane was better solvent than THF and the enantioselectivities were rather independent upon the reaction temperatures and Lewis base catalysts. Chemical yields were also satisfactory. [Pg.293]

Tetraalkylairunonium fluorides or metal fluorides are also effective as catalysts for the Michael addition of nitroalkanes fsee. Table 4.2. ... [Pg.104]

Table 6. Michael Addition of Carbonyl Compounds to Enones and Enoates with Crown Ethers or Quaternary Salts as Chiral Catalysts Crown Ethers ... Table 6. Michael Addition of Carbonyl Compounds to Enones and Enoates with Crown Ethers or Quaternary Salts as Chiral Catalysts Crown Ethers ...
Various chiral auxiliaries and catalysts have been developed that allow diastereoface-and enantioface-selective Michael additions. [Pg.954]

The catalytic conditions (aqueous concentrated sodium hydroxide and tetraalkylammonium catalyst) are very useful in generating dihalo-carbenes from the corresponding haloforms. Dichlorocarbene thus generated reacts with alkenes to give high yields of dichlorocyclopropane derivatives,16 even in cases where other methods have failed,17 and with some hydrocarbons to yield dicholromethyl derivatives.18 Similar conditions are suited for the formation and reactions of dibromocar-benc,19 bromofluoro- and chlorofluorocarbene,20 and chlorothiophenoxy carbene,21 as well as the Michael addition of trichloromethyl carbanion to unsaturated nitriles, esters, and sulfones.22... [Pg.93]

In addition to a-additions to isocyanides, copper oxide-cyclohexyl isocyanide mixtures are catalysts for other reactions including olefin dimerization and oligomerization 121, 125, 126). They also catalyze pyrroline and oxazoline formation from isocyanides with a protonic a-hydrogen (e.g., PhCH2NC or EtOCOCHjNC) and olefins or ketones 130), and the formation of cyclopropanes from olefins and substituted chloromethanes 131). The same catalyst systems also catalyze Michael addition reactions 119a). [Pg.49]

Certain proteases, for example alkaline protease from Bacillus suhtilis, have also proven to be good catalysts for the Michael addition of nitrogen nucleophiles to a,/3-efhylenic compounds [118, 119]. [Pg.114]

The combination of CsF with Si(OMe)4 58 is an efficient catalyst for Michael additions, e.g. of tetralone 130 to methacrylamide, followed hy cyclization of the addition product to the cyclic enamide 131 in 94% yield [67]. Likewise, addition of the lactone 132 to methyl cinnamate affords, after subsequent cyclization with tri-fluoroacetic acid, the lactam 133 in 58% yield [68] whereas < -valerolactam 134, with ethyl acrylate in the presence of Si(OEt)4 59/CsF, gives 135 in 98% yield [69]. Whereas 10mol% of CsF are often sufficient, equivalent amounts of Si(OEt)4 59 seem to be necessary for preparation of 135 [69] (Scheme 3.11). [Pg.34]

Examples of commercially applied solid base catalysts are much fewer than for solid acids. Nevertheless, much attention is currently focused on the development of novel solid base catalysts for classical organic reactions such as aldol condensations, Michael additions, and Knoevenagel condensations, to name but a few. [Pg.44]

A thio-substituted, quaternary ammonium salt can be synthesized by the Michael addition of an alkyl thiol to acrylamide in the presence of benzyl trimethyl ammonium hydroxide as a catalyst [793-795]. The reaction leads to the crystallization of the adducts in essentially quantitative yield. Reduction of the amides by lithium aluminum hydride in tetrahydrofuran solution produces the desired amines, which are converted to desired halide by reaction of the methyl iodide with the amines. The inhibitor is useful in controlling corrosion such as that caused by CO2 and H2S. [Pg.92]

The solvent and temperature effects for the Michael addition of amidoxime 7 to DMAD were probed because the reaction itself occurs without any other catalysts. As shown in Table 6.2, the reaction gave a high ratio of 8E in strongly aprotic polar solvents such as DMF and DMSO (entry 1 and 2). 8E was also found as the major product in MeCN (entry 3), dichloromethane (entry 4), and xylenes (entry 5). To our delight, the desired 8Z was obtained as the major component in methanol (entry 6). The stereoselectivity of 8Z versus 8E was better at low temperature (entry 7). A similar result was observed when the reaction was run in THF or dichlo-roethane in the presence of a catalytic amount of DABCO (entries 9 and 10). [Pg.171]

Jenner investigated the kinetic pressure effect on some specific Michael and Henry reactions and found that the observed activation volumes of the Michael reaction between nitromethane and methyl vinyl ketone are largely dependent on the magnitude of the electrostriction effect, which is highest in the lanthanide-catalyzed reaction and lowest in the base-catalyzed version. In the latter case, the reverse reaction is insensitive to pressure.52 Recently, Kobayashi and co-workers reported a highly efficient Lewis-acid-catalyzed asymmetric Michael addition in water.53 A variety of unsaturated carbonyl derivatives gave selective Michael additions with a-nitrocycloalkanones in water, at room temperature without any added catalyst or in a very dilute aqueous solution of potassium carbonate (Eq. 10.24).54... [Pg.323]


See other pages where Michael addition catalysts is mentioned: [Pg.91]    [Pg.91]    [Pg.113]    [Pg.164]    [Pg.230]    [Pg.7]    [Pg.219]    [Pg.233]    [Pg.296]    [Pg.258]    [Pg.76]    [Pg.911]    [Pg.987]    [Pg.135]    [Pg.1023]    [Pg.148]    [Pg.99]    [Pg.101]    [Pg.45]    [Pg.339]    [Pg.319]    [Pg.319]    [Pg.321]    [Pg.322]    [Pg.330]   
See also in sourсe #XX -- [ Pg.207 ]




SEARCH



Catalyst additives

© 2024 chempedia.info