Catalysts alkali metals

With a new catalyst (alkali-metal oxide), smaller catalyst concentrations can be used than is the case with sodium hydroxide. With suitable reactor design and choice of catalyst, the salt content of the glycerol produced is decreased by 50%, and smaller quantities of fatty acids are formed in the splitting reaction. 

The effect of iodide and acetate on the activity and stability of rhodium catalysts for the conversion of methanol into acetic acid have been studied. Iodide salts at low water concentrations (<2 M) promote the carbonylation of methanol and stabilize the catalyst. Alkali metal iodides react with methylacetate to give methyl iodide and metal acetate the acetate may coordinate to Rh and act as an activator by forming soluble rhodium complexes and by preventing the precipitation of Rhl3. A water-gas shift process may help to increase the steady-state concentration of Rh(I). The labile phosphine oxide complex (57) is in equilibrium with the very active methanol carbonylation catalyst (58) see equation (56). 

PREPARATIVE METHODS ds-l,4-Polyisoprene is made by coordination, anionic, free-radical, or cationic polymerization of isoprene through the use of coordination catalysts, alkali metal catalysts, AUin catalysts, organoalkani catalysts, or conventional Lewis acids. ... 

The effect of promoter is related with support. For RU-M/AI2O3 catalysts, alkali metal can enhance not only the TOF of the catalyst, but also the dispersion of Ru. And the hydroxide of alkali metal can prevent the poison of H2O or CO. For the RU/AI2O3 catalyst promoted by alkali metal of Cs, Rb and K, the effect of promoter Increases with the decreasing of the electronegativity or the increasing... 

Polymerization of e-caprolactam at 154 C (initial polymerization temperature). Initiator = N-acetyl caprolactam (1 mole %), Catalyst = alkali metal caprolactamate (1 mole %). 

As homogeneous catalysts, alkali metals. Li —amide,and transition metal complexes such as Ni[P(OC2Hs)3]4, Ni acetylacetonate, PdBr2(Ph2PCH2PPh2),... 

The alkali metal tetrahydridoborates are salts those of sodium and potassium are stable in aqueous solution, but yield hydrogen in the presence of a catalyst. They are excellent reducing agents, reducing for example ion(III) to iron(II). and silver ions to the metal their reducing power is used in organic chemistry, for example to reduce aldehydes to alcohols. They can undergo metathetic reactions to produce other borohydrides, for example... 

Cobalt has an odd number of electrons, and does not form a simple carbonyl in oxidation state 0. However, carbonyls of formulae Co2(CO)g, Co4(CO)i2 and CoJCO),6 are known reduction of these by an alkali metal dissolved in liquid ammonia (p. 126) gives the ion [Co(CO)4] ". Both Co2(CO)g and [Co(CO)4]" are important as catalysts for organic syntheses. In the so-called oxo reaction, where an alkene reacts with carbon monoxide and hydrogen, under pressure, to give an aldehyde, dicobalt octacarbonyl is used as catalyst ... 

Single-bond cleavage with molecular hydrogen is termed hydrogenolysis. Palladium is the best catalyst for this purpose, platinum is not useful. Desulfurizations are most efficiently per-formed with Raney nickel (with or without hydrogen G.R. Pettit, 1962 A or with alkali metals in liquid ammonia or amines. The scheme below summarizes some classes of compounds most susceptible to hydrogenolysis. 

Alkali metal and other iodides are effective catalysts in reactions involving aUphatic chloro and bromo compounds, such as the preparation of cyclopropane from 1,3-dichloropropane andmetaUic 2inc (141). 

Fixed-Bed Vapor-Phase Oxidation of Naphthalene. A sihca gel or sihcon carbide support is used for catalyst involved in the oxidation of naphthalene. The typical naphthalene oxidation catalyst is a mixture of vanadium oxide and alkali metal sulfate on the siUca support. Some changes, such as the introduction of feed vaporizers, are needed to handle a naphthalene feed (14), but otherwise the equipment is the same. 

The most common catalysts in order of decreasing reactivity are haUdes of aluminum, boron, zinc, and kon (76). Alkali metals and thek alcoholates, amines, nitriles, and tetraalkylureas have been used (77—80). The largest commercial processes use a resin—catalyst system (81). Trichlorosilane refluxes in a bed of anion-exchange resin containing tertiary amino or quaternary ammonium groups. Contact time can be used to control disproportionation to dichlorosilane, monochlorosilane, or silane. 

The catalysts most often described in the literature (209—211,252) are sodium or potassium hydroxide, methoxide, or ethoxide. The reported ratio of alkali metal hydroxides or metal alcoholates to that of poly(vinyl acetate) needed for conversion ranges from 0.2 to 4.0 wt % (211). Acid catalysts ate normally strong mineral acids such as sulfuric or hydrochloric acid (252—254). Acid-cataly2ed hydrolysis is much slower than that of the alkaline-cataly2ed hydrolysis, a fact that has limited the commercial use of these catalysts. 

Promoters. Many industrial catalysts contain promoters, commonly chemical promoters. A chemical promoter is used in a small amount and influences the surface chemistry. Alkali metals are often used as chemical promoters, for example, in ammonia synthesis catalysts, ethylene oxide catalysts, and Fischer-Tropsch catalysts (55). They may be used in as Httie as parts per million quantities. The mechanisms of their action are usually not well understood. In contrast, seldom-used textural promoters, also called stmctural promoters, are used in massive amounts and affect the physical properties of the catalyst. These are used in ammonia synthesis catalysts. 

Alkali Metal Catalysts. The polymerization of isoprene with sodium metal was reported in 1911 (49,50). In hydrocarbon solvent or bulk, the polymerization of isoprene with alkaU metals occurs heterogeneously, whereas in highly polar solvents the polymerization is homogeneous (51—53). Of the alkah metals, only lithium in bulk or hydrocarbon solvent gives over 90% cis-1,4 microstmcture. Sodium or potassium metals in / -heptane give no cis-1,4 microstmcture, and 48—58 mol % /ram-1,4, 35—42% 3,4, and 7—10% 1,2 microstmcture (46). Alkali metals in benzene or tetrahydrofuran with crown ethers form solutions that readily polymerize isoprene however, the 1,4 content of the polyisoprene is low (54). For example, the polyisoprene formed with sodium metal and dicyclohexyl-18-crown-6 (crown ether) in benzene at 10°C contains 32% 1,4-, 44% 3,4-, and 24% 1,2-isoprene units (54). 

The process of anionic polymerisation was first used some 60 or more years ago in the sodium-catalysed production of polybutadiene (Buna Rubbers). Typical catalysts include alkali metals, alkali metal alkyls and sodium naphthalene, and these may be used for opening either a double bond or a ring structure to bring about polymerisation. Although the process is not of major importance with the production of plastics materials, it is very important in the production of synthetic rubbers. In addition the method has certain special features that make it of particular interest. 

The esterification reaction may be carried out with a number of different anhydrides but the literature indicates that acetic anhydride is preferred. The reaction is catalysed by amines and the soluble salts of the alkali metals. The presence of free acid has an adverse effect on the esterification reaction, the presence of hydrogen ions causing depolymerisation by an unzipping mechanism. Reaction temperatures may be in the range of 130-200°C. Sodium acetate is a particularly effective catalyst. Esterification at 139°C, the boiling point of acetic anhydride, in the presence of 0.01% sodium acetate (based on the anhydride) is substantially complete within 5 minutes. In the absence of such a catalyst the percentage esterification is of the order of only 35% after 15 minutes. 

Amongst the catalysts used or the polymerisation-trimerisation reactions are alkali metal phenolates, alcoholates and carboxylates and compounds containing o-(dimethylaminomethyl)phenol subgroups. Fluorocarbons such as trichloro-fluoromethanes are used as the sole blowing agents in the absence of any isocyanate-water reaction. 

Lewis acids are defined as molecules that act as electron-pair acceptors. The proton is an important special case, but many other species can play an important role in the catalysis of organic reactions. The most important in organic reactions are metal cations and covalent compounds of metals. Metal cations that play prominent roles as catalysts include the alkali-metal monocations Li+, Na+, K+, Cs+, and Rb+, divalent ions such as Mg +, Ca +, and Zn, marry of the transition-metal cations, and certain lanthanides. The most commonly employed of the covalent compounds include boron trifluoride, aluminum chloride, titanium tetrachloride, and tin tetrachloride. Various other derivatives of boron, aluminum, and titanium also are employed as Lewis acid catalysts. 

The isocyanurate reaction occurs when three equivalents of isocyanate react to form a six-membered ring, as shown in the fifth item of Fig. 1. Isocyanurate linkages are usually more stable than urethane linkages. Model compound studies show no degradation of the trimer of phenyl isocyanate below 270°C [10,11]. Catalysts are usually needed to form the isocyanurate bond. Alkali metals of carboxylic acids, such as potassium acetate, various quaternary ammonium salts, and even potassium or sodium hydroxide, are most commonly used as catalysts for the isocyanurate reaction. However, many others will work as well [12]. 

It was noted early by Smid and his coworkers that open-chained polyethylene glycol type compounds bind alkali metals much as the crowns do, but with considerably lower binding constants. This suggested that such materials could be substituted for crown ethers in phase transfer catalytic reactions where a larger amount of the more economical material could effect the transformation just as effectively as more expensive cyclic ethers. Knbchel and coworkers demonstrated the application of open-chained crown ether equivalents in 1975 . Recently, a number of applications have been published in which simple polyethylene glycols are substituted for crowns . These include nucleophilic substitution reactions, as well as solubilization of arenediazonium cations . Glymes have also been bound into polymer backbones for use as catalysts " " . 

When potassium fluoride is combined with a variety of quaternary ammonium salts its reaction rate is accelerated and the overall yields of a vanety of halogen displacements are improved [57, p 112ff. Variables like catalyst type and moisture content of the alkali metal fluoride need to be optimized. In addition, the maximum yield is a function of two parallel reactions direct fluorination and catalyst decomposition due to its low thermal stability in the presence of fluoride ion [5,8, 59, 60] One example is trimethylsilyl fluoride, which can be prepared from the chloride by using either 18-crown-6 (Procedure 3, p 192) or Aliquot 336 in wet chlorobenzene, as illustrated in equation 35 [61],... 

The heavier alkaline earth metals Ca, Sr, Ba (and Ra) react even more readily with non-metals, and again the direct formation of nitrides M3N2 is notable. Other products are similar though the hydrides are more stable (p. 65) and the carbides less stable than for Be and Mg. There is also a tendency, previously noted for the alkali metals (p. 84), to form peroxides MO2 of increasing stability in addition to the normal oxides MO. Calcium, Sr and Ba dissolve in liquid NH3 to give deep blue-black solutions from which lustrous, coppery, ammoniates M(NH3)g can be recovered on evaporation these ammoniates gradually decompose to the corresponding amides, especially in the presence of catalysts ... 

The modes of thermal decomposition of the halates and their complex oxidation-reduction chemistry reflect the interplay of both thermodynamic and kinetic factors. On the one hand, thermodynamically feasible reactions may be sluggish, whilst, on the other, traces of catalyst may radically alter the course of the reaction. In general, for a given cation, thermal stability decreases in the sequence iodate > chlorate > bromate, but the mode and ease of decomposition can be substantially modified. For example, alkali metal chlorates decompose by disproportionation when fused ... 

To accelerate the polymerization process, some water-soluble salts of heavy metals (Fe, Co, Ni, Pb) are added to the reaction system (0.01-1% with respect to the monomer mass). These additions facilitate the reaction heat removal and allow the reaction to be carried out at lower temperatures. To reduce the coagulate formation and deposits of polymers on the reactor walls, the additions of water-soluble salts (borates, phosphates, and silicates of alkali metals) are introduced into the reaction mixture. The residual monomer content in the emulsion can be decreased by hydrogenizing the double bond in the presence of catalysts (Raney Ni, and salts of Ru, Co, Fe, Pd, Pt, Ir, Ro, and Co on alumina). The same purpose can be achieved by adding amidase to the emulsion. 

A three-step process developed hy Snamprogetti is based on the reaction of acetylene and acetone in liquid ammonia in the presence of an alkali metal hydroxide. The product, methylhutynol, is then hydrogenated to methylhutenol followed hy dehydration at 250-300°C over an acidic heterogeneous catalyst. 

Usually metal-free phthalocyanine (PcH2) can be prepared from phthalonitrile with or without a solvent. Hydrogen-donor solvents such as pentan-l-ol and 2-(dimethylamino)ethanol are most often used for the preparation.113,127 128 To increase the yield of the product, some basic catalyst can be added (e.g., DBU, anhyd NH3). When lithium or sodium alkoxides are used as a base the reaction leads to the respective alkali-metal phthalocyanine, which can easily be converted into the free base by treatment with acid and water.129 The solvent-free preparation is carried out in a melt of the phthalonitrile and the reductive agent hydroquinone at ca. 200 C.130 Besides these and various other conventional chemical synthetic methods, PcH2 can also be prepared electrochemically.79... 

The reaction with 4-nitrophenol and pentafluorophenol in the presence of KF-18-crown-6 has been investigated. Pentafluorophenoxide anion was found to be a better leaving group [82JFC(20)439]. Alkali metal fluorides on graphite can act as catalysts for nucleophilic substitution of pentafluor-opyridine [90JFC(46)57]. 

---